On Fri, Aug 11, 2023 at 05:03 AM, charliehibbins wrote:
Does anybody know if there is a solution for this?
Back on another site and having the exact same issue.?
Had hoped this would have been sorted by now........
I worked with Jen E. from ControlConcepts on this and we bounced around a bunch of attempts.? Unfortunately, we weren't able to get a resolution from the modules themselves.? I don't exactly recall why, something to do with the feedback the Lutron QSX system is kicking back.? There is a way to do the press/hold dimming concept outside of the module, unfortunately it created a lot of work for this particular project having to monitor load levels and determining when a load was >0 or =0.? Basically, put a press and hold on the button itself, if held and the level = 0, hold the dim+ command.? If load > 0 dim- command.? The caveat to this was the Lutron system doesn't report its actually load level until ramping is complete so there is some more juggling you need to do for seamless UI presentation.
We just had way too many loads to do this with on this project and I didn't want to spend the time working it all out ($$$).? We ended up just doing on/off's for each load then setting a High, Medium, Low preset scene for each room.
We have a couple QSX systems coming up here this month (for some reason we have been lucky in getting QS systems this summer, probably due to backorders) so I will be revisiting this topic soon and most likely will strip down the CC module and build it out to accomplish this.? From what Jen told me, they didn't plan on updating their module quite yet.
Hope this helps.
