开云体育

Hi All, I have a project that needed to pivot to the NR1711, due to inability to get other AVRs... I have never controlled this (or any Marantz) unit with IP control. 1. What if any issues are people

Yes, I did check that for both systems

Dustin - That seems to work but only using HTTPS but this gets me in the right direction. Thanks.

Hey Steve, thank you so much for ending my misery LOL.? I have tried everything under the sun and nothing would even start to work.? And, with CH, I have no way to watch signals to see if there is

I'm also in a similar boat. Crestron's projects are all in Angular. So I'm taking a couple of courses through Udemy about Angular. So I've been trying to piece together information to make an Angular

Have you tried to do a wifi survey and confirm the wifi channels you have assigned to the Gateways are not being used by other devices? I would also check FW on the GWEXERs. The MC3 is questionable as

I have had the same issue and have yet to resolved it.? However, I have installed the Crestron One app, enabled HTML5 in settings, and added the app to the program, this worked for me.? This at

I just had 2 different jobs last week where the HR remotes weren't communicating with the MC3.? This is with both MC3 gateway and EX Gateways.? All other functions worked fine.? iPad connects,

Hi, Just wondering has anyone had an experience controlling the Philips BFL Series TV's over rs232? The BDL commands only work via LAN control. All settings and clone zip have been applied also

Hi Antonio, I've just started adding support for a couple of new pieces of Shelly hardware to the code.? Since I'm modifying the code myself right now I'll see if I can add support for tenths of

I was never able to get Yamaha AVRs to work with CH either. This is on systems that previously were working flawlessly for years via IP on full fat Crestron. Serial and IR work, but no go on IP.

Thanks for reply Jay, everything is as I imagined it. About polling I was hoping I was wrong ... :-). unfortunately i'm not a so good s# programmer, i'll try to modify your code to have decimal

So i have been trying to run a demo project which i downloaded from github but been unsuccessful. I have done everything as mentioned in documentation but there is no connection between my GUI and

Does it have a tcp server, or is it https only?

How do you send a WOL packet? I feel like the CCD should do that when I pulse 'PowerOn', but nothing...

Do you have a Samsung contact you'd be comfortable sharing with me so I can reach out to them for the API?

What's your secret for powering it on? I'm having absolutely no luck

You should be able to use 4/8GB SD Cards also.. I have done so in other 3 series devices and TSW-750/2 type panels with good performance. As others may have mentioned you should try to avoid the

got a bunch of 2GB cards fired up the 1st, required HW reset to wake up & boot seemed OK loaded a pgm - OK power cycled - watchdog & S+ errors (each time i power cycle) reboot from text console & OK

Hi all, Not sure if any of you are working with the new Chromecast with remote, but I discovered that dpad navigation and the back button from the Apple TV CEC symbol work (the Crestron certified