开云体育

I have downloaded the demo code and everything looks fairly straight forward.? I have loaded the program to the processor and can verify that port 49200 is open.? I set my processors IP in the

Correct.

Hi? i am having an issue with the dali driver of led strip, It shows failure when addressed on the dali commissioning tool but i can control the intensity of the light . But when i add it to a group

Completely "normal", how should the panel know if you want to use the slider or if you want to swipe between subpages?

So it's a vertical gauge on a vertical subpage ref list. If i put the same referenced subpage on a horizontal subpage ref list, it shows up fine...

I put a gauge on a subpage ref. The subpage ref list, says 'unable to show this control' or something similar. Anyone got ideas to fix?

A router can have only one input selected per output so you don’t have to worry about ‘cleaning up’ active if you’re using a router; a mixer can have multiple inputs so depending on the size

While the Tesira modules are rock-solid, the Nexia ones are pretty awful. I wound up just using the Audia/Nexia command string calculator (

I think you can use the "Biamp AudiaFlex+Nexia On-Off Control" module and select the 'Mute device type' as 'Router Crosspoint Mute'.? This would allow you to control the on/off state of each

I would also like to be added to the list.?I've been looking for this for a while now, I'm glad you picked this up.

Is there a Router/Mixer module for the Nexia? Or will a preset leave an input active if another preset calls a different input for the same output?

You would use an INIT unless you want to send it to a specific light level like 90% or 0% ie ON and OFF, I prefer to use the ANALOG PRESET for this.? Use a ANALOG RAMP to ramp it up and down.

Can this be run using ng:serve?

The following files have been uploaded to the Files area of the [email protected] group. * /Device Ping 3-4 Series_archive.zip (

Version 3.9 and yeah the whole idea is to get the tc8 out of the equation as to not have 2 touch screens on the table

What software is running in G7500? I tested it with v3.9 and worked Ok.. However, i was doing the? most of the call control over the TC8.

Really? I'm using the GroupSeries Driver 4.0.0 and when i put the unit into Teams mode i lose 95% of my control

Yes, you need to add start/stop presentation on a SIO. Other than that, it works great.

Hi Anewdaytotri, I download it today, very impressed by your Z6 Documentation. Appreciate it! Cheers,

Anyone know if its possible (with any of the currently available modules) to control the G7500 while it is in Teams Mode?