开云体育

I'll give it a try, thank you!!!

Regarding the Pyng Smart Graphics: How have you gotten it to work consistently? Crestron TB doesn't have any clue how many supported CRPC connections are allowed. They have stated to me that it wasn't

My 2 cents... The thing I dislike most about D3 is the engravings errors (where it blanks all the keypads on a revision change) I've done my share of Simple lighting, but to do a lighting program

It shouldn't be that difficult but will take some time. I had written an advanced S# module that leveraged RCB's in S+ to create dynamic ranges and configurable groups and presets. There were a few

I'm on Device DB 200.45.003.00 and Crestron DB 203.00.005.00, and I haven't had a single problem. However, it is just one DB release older than the current ones. I typically wait a month or two before

I have multiple machines that are having issues with the compile phase on a 2 series system running a PAC2m.? System is small, but seems to stop during the compile of the change comparison module.?

I had to update the fw twice. It will reboot 3- 4 times. Takes about 12 - 15 minutes. Wait 20 minutes before power cycling the unit. Set the receive side to "Host" for the fw update. Once completely

The new SG weather sucks anyway. No text in the weather forecast, just numbers and an icon. The old weather would give you a full paragraph of context.

There is no need to add anything in Simpl for the VTPro Weather Application. They are two different things. The Weather Application was updated in a recent SG release for a new data provider. But it

Anybody ever run into problems using the HD-EXT-USB-2000-C with a Flex system? Engine is on the TX side to get HDMI video to the display (Engine HDMI > Tx HDMI > Rx HDMI > Display HDMI). Logitech PTZ

yes, mickeysomra, I have been following Answer ID: 100052. Did I misunderstand your post in /g/crestron/message/239930? ( /g/crestron/message/239930 ) Based on that I

Hi, yesterday I manage to configure the HP ARUBA in single switch mode using NVX+DANTE. *I don't know if it is just a coincidence or not* but to have a dante audio clear and not overflow I had to

I'm guessing you're following this here -> https://support.crestron.com/app/answers/detail/a_id/1000527 At least that's what I did and got it working. Don't know how this is supposed to be simple

Hi All, I've been watching this thread hoping for some good news, but got tired of waiting, so decided to roll up my sleeves and spent some time network sniffing and coding to figure out what happened

Thanks mickeysomra. It now looks like this: https://imgur.com/a/72Xre5S The TV is still unresponsive...

I've actually done very little lighting programming as the majority of large residential projects I worked on used Lutron lighting and I just had to interface with it.? However, I was thrown in the

Are you getting any responses from the TV? Why don't you add a delay to your first signal that sends the IP and driver URL, and add them to a MSP just in case?

Does anyone know what port numbers the new service uses?? Using the netstat command, I am seeing a single IP address with several port numbers associated.? Would love to compare with someone else.

You might contact them and check.? However, the iPad interface is a little dated and not the most refined.? But it doesn't need to be because most clients never touch it.? I have some client's that

Home, unfortunately with the lack to use values in a custom program, is not on option.? Per the clients request, there is to be a floor plan layout for control of the shades and lights throughout.?