Anybody ever run into problems using the HD-EXT-USB-2000-C with a Flex system?
Engine is on the TX side to get HDMI video to the display (Engine HDMI > Tx HDMI > Rx HDMI > Display HDMI).
Logitech PTZ Pro 2 camera is in the RX side to get camera to the Engine (Camera USB > Rx USB > Tx USB > Engine USB).
HDMI video works until we connect the USB camera, which kills the HDMI video and the Rx link LED shuts off. Nothing gets from Tx to Rx or vice versa once in this state.
Tried with the Rx set to Host, Auto, and Device. The only time connecting the camera doesn't break the whole system is when it's set to Device, but even then I only have HDMI video and no USB camera the other direction.
I dealt with this on another project some time ago and TB had me update firmware, which fixed it, but that's not doing the trick this time.
