开云体育

yes, mickeysomra, I have been following Answer ID: 100052. Did I misunderstand your post in /g/crestron/message/239930? ( /g/crestron/message/239930 ) Based on that I

Hi, yesterday I manage to configure the HP ARUBA in single switch mode using NVX+DANTE. *I don't know if it is just a coincidence or not* but to have a dante audio clear and not overflow I had to

I'm guessing you're following this here -> https://support.crestron.com/app/answers/detail/a_id/1000527 At least that's what I did and got it working. Don't know how this is supposed to be simple

Hi All, I've been watching this thread hoping for some good news, but got tired of waiting, so decided to roll up my sleeves and spent some time network sniffing and coding to figure out what happened

Thanks mickeysomra. It now looks like this: https://imgur.com/a/72Xre5S The TV is still unresponsive...

I've actually done very little lighting programming as the majority of large residential projects I worked on used Lutron lighting and I just had to interface with it.? However, I was thrown in the

Are you getting any responses from the TV? Why don't you add a delay to your first signal that sends the IP and driver URL, and add them to a MSP just in case?

Does anyone know what port numbers the new service uses?? Using the netstat command, I am seeing a single IP address with several port numbers associated.? Would love to compare with someone else.

You might contact them and check.? However, the iPad interface is a little dated and not the most refined.? But it doesn't need to be because most clients never touch it.? I have some client's that

Home, unfortunately with the lack to use values in a custom program, is not on option.? Per the clients request, there is to be a floor plan layout for control of the shades and lights throughout.?

Yes I have spin my own custom SIMPL lighting solution.? It took a lot of time to develop and my employer paid me to do it so I cannot share it. I made it programmable where even the client can

I'm of a similar mindset with D3. Although, the latest project that I did involved a 4-series processor, and it's ridiculously speedy. It was a Vantage replacement, so that meant every keypad only had

Great Thread, John. I also would love to hear others' experiences. I'm a few weeks out from starting a development project to build an SMW Lighting program/template too! I also had to suffer the

I have a large job that we well need to commission.? It will likely be 400+ loads and shades, and the last large project I did in D3 was about 275 loads with shades and it is a time suck to say the

So I have added MAC Address and PassCode, following the Samsung example (Thanks mickeysomra). It now looks like this: https://imgur.com/UFpPGee ...but still now joy. The TV is still not responding.

Hi Steve, that?s a really “interesting” approach to use a production system at a cutomer site as a honeypot – never heard about that. I also don?t agree with the approach to downplay an issue

Thorsten, I agree if security is involve, you have to be more careful.? But the majority of our stuff is just AV control which about the most someone could do it turn the volume up.? If someone is

I could never get them to work over ethernet and always revert back to rs232...

It might be much easier to approach this from another direction and control it via RS-232 using an Ethernet to Serial convertor, such as those from Moxa. Controlling these LG TV's with RS-232 commands

B B: I leave that checked and haven’t had issues. Stephen: you’re definitely missing some .net dependencies. When I initialize a new machine, Crestron is the LAST thing I install because every