开云体育

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/Blackmagic VideoHub Control.zip Uploaded by :

I wrote a SIMPL+ module to control the videohub over rs422 last year, I will upload it to the files section in a few minutes. It is based on arrays, so if you need 72 outputs, just edit the variable

Putting this unit through the paces at the moment. I am already hammering Crestron about this, but thought I would post here as well. The help file says that valid inputs for the window sources are

Hi Guys, I have a strange issue with a CP3N. It is not operating a toggle consistently on shutdown. About every tenth shutdown it doesn't operate the toggle. I'm pulsing the toggle from a stepper.

So I'm working on updating the Blackmagic router module in the files section to work with more than 16 inputs. I have a VideoHub72 I'm trying to control. If anyone is interested in a copy of it,

Does anyone know of a brand of product that is easy to control with Crestron for the following scope? Scope: A head end Video IP encoder that has 16 HDMI inputs and transmits these 16 video signals

I've found that http://web-sniffer.net/ http://web-sniffer.net/ is helpful in seeing how to format your http requests

Ok, not really a programming question but... Anyone have any success in mounting a GLS-ODT-C-CN to an existing 2-gang box? In my garage (finished drywall) ceiling I have a 4 square box with a 2-gang

HTTP1.1 requires a Host: header at a minimum. The device may be expecting one or more additional headers as well -- those should be visible in your Wireshark request as well, or you can see them from

"GET /httpapi/WriteParam?action=writeparam&RMT_DOMAINNAME_3=rtsp://admin:BpnhGeB3xQ;[email protected]:554/PSIA/Streaming/channels/2 HTTP/1.1 \r\n\r\n" I'd start with getting those extra carriage

I can't seem to figure out the correct format to send a GET http request. My request that works correctly from a browser is:

Thanks, that's the problem. It works now!!! Though it works all fine, I am wondering why it has a white triangle with exclamation mark at upper right corner. Also, I tried to put a RSS news feed

This is going to be very messy since you have NAT involved in addition to the broadcast domain issues with using peer-to-peer RAVA... The shortest distance between two points is going to be to get all

Finishing up a system and have a 1542 and Holovision Doorphone on the LAN side with 7 TSW1052s on the Crestron Subnet. the 1542 Can Call the doorphone but none of the 1052s. The 1052s may only call

Thanks, we had a Sony module that worked for Off and found the On string from a Just Add Power doc, All good! Thanks guys

Thank you. I will look it up for morr info

Bumping this post to see if anyone has had any luck with direct control of the P60 in the last 8 months.

"So did you use IR from Crestron or RS232? I tried sending IR to the serial port as I thought that what you meant and it doesn't work. If you used Serial, would you mind sharing the commands, I only

Awesome. Thanks guys. I got it working.

HI Jon; The commands are in a document in the files area, Bravia API. There is also a module in the application market. They have used the same commands for many years. From: