开云体育

I haven't done this, but from what I have seen when you configure your output cards for the receiver you choose HDBaseT Receiver and then just add your serial driver for that device. Im not 100% as I

i see the start/stop commands I don't see the Y & Z values being sent as part of the string just ramp to X value I see the Y & Z values are passed in, but don't seem to be added to the string maybe

Got new project. Components are: DM-MD16x16 and NEC NP-PA53UJL Projectors and a CP3 processor. The content and control are over HDBT for all projectors, and I haven’t done controlling devices over

It sounds like the raise/lower button is being released inadvertently. For Raise and Lower, the module sends a "start ramp" command when the buttons are pressed, then a "stop ramp" command when

Thanks everyone for the suggestions, I just remove that jumper, and everything worked.

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /IR Drivers/Flir M3100.ir Uploaded by : keith.gossen

Sehr geehrte Mitglieder, für oben benanntes Panasonic OLED-Ger?t suche ich ein Crestron-Macro. Kann mir ein Mitglied helfen? mit freundlichen Grü?en Akhnaforest Dear members, for above-mentioned

Does anyone have an xml file for Fios? I know I can edit one myself but I am under the gun trying to get 2 projects done that want it by the 4th. TIA if anyone can post it Happy 4th of July

Try the following: rtsp://<IPADDRESS>:554/stream0/mobotix.mjpeg http://<IPADDRESS>/cgi-bin/faststream.jpg?preview&size=1280x864 http://<IPADDRESS>/cgi-bin/faststream.jpg?preview&size=1280x864 These

seems to be known issue with TB no solution yet mark

I am trying to use raise/lower to a Maestro dimmer module I have had to fix the modules to be threadsafe, no THREADSAFE keyword or semaphore implemented a single press works OK, but if you hold either

Johnmaxman, When you are sending the signal to the virtual keypad from the Xpanel or other app, how do you normally set up the symbols setup to send the pulse -- a one-shot? Thanks,

Did you try longitude and latitude this seem to always work form me. Sent from my Windows 10 phone Sent: June 30, 2017 9:12 PM To: Crestron@... Subject: [Crestron] TSW750 panel Weather V2

Are your DNS servers setup and correct on the 750? I've had this issue before and that was the reason, no DNS servers.

First time deal with Core 3 UI weather object. Drop it to panel, It displayed "Please wait, Retrieving default location from file system". Indeed specified zipcode. Couldn't find any other location to

Thanks for the reply . . i figured it out . . I didnt realize Firefox no longer allows you to bypass non-certified HTTPS sites? . . . I need to investigate this as soo much that we do are self signed

Make sure you put https:// in front of the IP address. The processor doesn't redirect to automatically. Crestron@...> wrote:

I am using the button to trigger either a global preset or a named scene.

I have experienced this with both iPad and iPhone I'm been with with ATSG on this for about 6 months, Engineering is aware of the issue, though it only affects a select few devices. Mine is an RMC3,

Authentication and SSL are enabled. I get an access denied screen when I try to access the XPanel webpage. how do I enter my auth credentials . . or is this possible? I've only done webxpanels once