开云体育

When using an http client to make a request to a device in S#, is there a way to adjust the timeout before the Crestron system throws an exception that device has not responded in a timely manner?

Yes, that’s what I was trying to convey here: /g/crestron/message/243850 That module already has the correct input names as used by the new RX-AnA units I think. Rather than

Thanks Jsells, I have all the protocols, what I don't have is the "Desire". This job is a domestic and a very rarely do domestic so I know I will never use it again. That's why I am spending too much

I believe that we're finally in the clear, with a short-term caveat - I'll verify that I can post what I know on monday...

Just a follow-up regarding the RX-AxA series of AVRs... The 'Yamaha RX-A3010 IP v1.2' module seems to work fine... BUT It does not have the commands for the HDMI inputs. The previous generation of the

YXC is just a HTTP API and by my understanding is similar if not the same as MusicCast API. When I was testing the CCD for my RX-A780 I was able to confirm with network captures that the device was

HI, Can someone confirm that a NVX-363/NVX-360 accepts 1080i 50Hz ? The specs shows 1080i 30Hz in the common resolutions. Thanks Best regards Chris

I've run into the same results on this... Have a customer that has 2 of these thermostats and I have a DIN-AP3 Running old firmware and can get one of them working but not both... I get no where with

For reserved joins you can subscribe to the signal name instead of using the reserved join number when working with CH5. I (among others) use:l something like this: CrComLib.subscribeState('b',

So I've gotten my Ch5 angular project to upload and show up on the TSW1060. I'm trying to detect if the touchpanel is Online with the system... reserved join 18494. But all i ever get is false, even

Ive used the YNCA protocol on both RS232 and IP. Both worked exceptionally well. I am doing a job at the moment where I am controlling 10 WXA-50's. These are using the new YXC protocol. I haven't

I had an install the beginning of last year where I had 5 AM200's. I had to return 2 of them for exhibiting similar issues. Unlike your experience, Crestron wanted them back to investigate before

We've got a deployment of 16 AirMedia AM-200s in standalone rooms (a.k.a. no control system), where we've got an HDMI via a 3rd party HDBaseT extender plugged in to the AM's HDMI input. We've now had

It's https only. In order to obtain the API for Samsung IP control, you have to reach out to their customer tech support and have them generate an NDA for you to sign. Currently in the process of

Hm, nobody? Von: [email protected] <[email protected]> Im Auftrag von Thorsten K?hler Gesendet: Mittwoch, 23. Februar 2022 19:06 An: [email protected] Betreff: [crestron] Pro3 recovery Hi, i?m

Has anyone controlled a TriplePlay Play3r-SP1 digital signage player or a TSO10G server via IP? Most players will be the only source connected to a LG display via HDMI and RS232 but need to control

Yeah, I see that now inside the module...Updating now!! TY, RW!!

In the second link which you suggested the "index.html" has no code written in it. Possibly the? reason why i am getting a blank page. To answer first part of your question I am just starting with

Not sure if the AVR will accept multiple connections to its control port, but expect it will because I can certainly still use the iOS app while Crestron is also connected. Why do that though? Just

Hi Jason, I don't have an answer for you with respect to the CEC control, but we (Chowmain Software) have started to develop an Android TV driver for SIMPL (we already have one for Crestron Home) that