开云体育

I believe the data integrity error is happening on many modules, and it was caused by a recent?"fix" with the compilers, I heard something that a more recent updated fixes that.. The power On

Thanks guys, I got it working. I'm embarrassed to admit for the first hour of my troubleshooting I was using the wrong IP address of my CP3.? Shit. J

Yes, you add a TCP/IP server to your Crestron program to catch the event and send it to an SIO symbol.? You point the 2N to your Crestron processor IP address and you trigger the 2N on the

This is the exact solution I need.? No video or ringing on IPAD, just a digital signal in the processor to trigger audio events. I'm assuming you added a TCP/IP server to your program to catch the

If you want the 2N to ring on an iPad, you have to install the 2N app on the iPad and then subscribe to month fee per iPad to enable that feature.?? The 2N app does not need to be running to ring

I think the iPad has to be awake, with the Crestron App active, for that to work - although I've never tried it. I've also never worked with 2N, but I think it can send an HTTP event to the Crestron

A lot of the new 2N doorstations can call crestron on SIP Rava. Problem with iPads is that they need to be running the crestron app to get this notification and to ring. Best bet would be to buy the

You need to purchase the optional HTTP package for the 2N doorstation.? That will allow the 2N to send a http request to your Crestron processor when the door bell button is pressed. I have used an

I have a client that had a 2N doorstation installed (they read it was compatible with Crestron), and they want a doorbell trigger to occur over the speakers.? My problem is this house has no touch

Crestron doesn't directly develop, many things on the application market Jim. For instance, the Planar VM series module is a Control Concepts module. It would not surprise me if most of the Planar

That's not true, but read it as "We're not fixing any of that.? You're on your own if you don't like what's there".

New the group but it was explained (at a Crestron training class) to me that Crestron does not develop most the modules on their app market. Those module are either developed by the manufacture or a

Just to add to Jim's comment about the webinar... * They said the X60 panels will continue to run the S1 app, so I'm assuming their will be a firmware update for the X60 panels that will update the

Crestron never fixes their modules and they will just tell you that the bugs in their modules won't cause any issues. If you want a module that compiles cleanly, and doesn't run like garbage, then you

I did get it to work. The only problem that I found was when you loose power the TV stops responding until you power it back on manually. Is this normal with this Crestron module? Also getting this

We have used these TV's a lot and controlled them via serial and IP many times with the module in the application marketplace.? I would recommend you use a multimeter to pinout the DB9 cable and

Oh, and for the control of the cameras itself, we just used the Crestron Lifesize module. Von: [email protected] <[email protected]> Im Auftrag von Thorsten K?hler Gesendet: Donnerstag, 11. Juni

Hi, we set up two conferencing systems with three cameras attached to a Lifesize Room 220 a couple of years ago. Since the Room 220 only supports two cameras (HDMI), we added a switcher. It was indeed

I have used these commands for a?Christie UHD651 Monitor Baud 115200 Power On-?SETQUICKSTANDBY off\r\n Power Off- SETQUICKSTANDBY on\r\n Poll Power-?GETQUICKSTANDBY\r\n

I haven't used that particular panel but had a similar issue with the access series. When first used I had it communicate over RS232 but after a hard power cycle I had nothing. I tried Christie