开云体育

From my experience with Christie, most of their device protocols have brackets around commands, I.e. (PWR 0) or (PWR 1) or (PWR?) Sent from iPhone

Anyone have the proper control protocol for a Christie Digital SUHD 861-L display? I’ve downloaded the manual, but that protocol did not work. I’ve tried several other commands to no avail. I get

UC-ENGINE is a component in the Flex room kits. Look at https://www.crestron.com/Products/Workspace-Solutions/Unified-Communications/Crestron-Flex-Integrator-Kits for current systems.

My guess is market penetration/installed base size for one. A lot for the IoT ecosystem is focused on -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect |

Luma, Lilin, IC Realtime, and ExacqVision NVRs are controllable over ethernet, with Luma being the most popular among integrators I work with.

For me, doing a recompile all usually fixes things – alternative is to downgrade to a earlier DB -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect | Crestron

@ Brian Erchenbrecher Thanks to your advise I started implementing ATOS (with analog increment and scalers) to send commands to the dimmers, and so far they have been working great, exactly how I

This is something that just started happening on my desktop.? Everything is fine on my laptop.? Both machines are running the latest updates, except for Simpl Windows.? Both are running 4.11.06.1

Try this? rtsp://Username:Password@IP_Address:554 Works on my Dahua cameras. Tim.

As far as I know, no. You can launch the app and you can flip from the app back to touchpanel mode but there is not really any deep integration – at least not that I’ve tripped across nor

oki thanks so will need the UC-ENGINE in all matters so :( ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

The TSW works together with the UC Engine.

You will need the UC engine. [email protected]> wrote:

Hi Do someone here have already integrated Microsoft Teams in a conferencing system ? Explanations I found at Crestron website suggests that I would need the UC-ENGINE to do that (one of few products

If you visit Sonos, they have a list of partners at: https://www.sonos.com/en-us/works-with-sonos Unfortunately, Crestron is not on the list. The same can be said for Control 4 and Savant. But

I could be misremembering, but I seem to recall that the serial protocol may be different from the IP protocol. Double check that before spending too much time with the IP module. -- Josh Winn The

One more question: if I create a Phone button, am I able to point it to open the Zoom App to the Phone menu/section directly?

If I don’t care about feedback, I use an SIO – which is 60% of the time. If I care about feedback, which usually is only volume feedback, we have an internal module that does some inputs and

I didn't click on every one, you are right, it looks like most of the X models have rs232.? Are you using one of the Crestron drivers for control or something custom?

With the Yamaha are you using one of the existing IP drivers (which one?) or something custom?