Oh, and for the control of the cameras itself, we just used the Crestron Lifesize module.

?

?

?

Hi,

?

we set up two conferencing systems with three cameras attached to a Lifesize Room 220 a couple of years ago.

Since the Room 220 only supports two cameras (HDMI), we added a switcher.

It was indeed a bit tricky to find one that is working, but the Extron SW HD did the job () including camera control.

AFAIR it was near EOL the time we installed it (AFAIR around 2013/14) so we bought another one as a replacement in case of failure.

The systems are still working.

It can be controlled with simple RS232 ASCII commands.

?

Regards, Thorsten

?

Von: [email protected] <[email protected]> Im Auftrag von elitespoon@...
Gesendet: Mittwoch, 10. Juni 2020 14:58
An: [email protected]
Betreff: [crestron] HDMI switcher and Lifesize Camera control

?

Good Morning,

I'm looking for an HDMI switcher that can work with a Lifesize Icon 600, the camera control is over HDMI which is the big hangup. I tried an Extron SW2 HD 4K based off some vague info I had received from LIfesize, but no go. Obviously some sort of control over the switcher is needed.

Thanks!