开云体育

New the group but it was explained (at a Crestron training class) to me that Crestron does not develop most the modules on their app market. Those module are either developed by the manufacture or a

Just to add to Jim's comment about the webinar... * They said the X60 panels will continue to run the S1 app, so I'm assuming their will be a firmware update for the X60 panels that will update the

Crestron never fixes their modules and they will just tell you that the bugs in their modules won't cause any issues. If you want a module that compiles cleanly, and doesn't run like garbage, then you

I did get it to work. The only problem that I found was when you loose power the TV stops responding until you power it back on manually. Is this normal with this Crestron module? Also getting this

We have used these TV's a lot and controlled them via serial and IP many times with the module in the application marketplace.? I would recommend you use a multimeter to pinout the DB9 cable and

Oh, and for the control of the cameras itself, we just used the Crestron Lifesize module. Von: [email protected] <[email protected]> Im Auftrag von Thorsten K?hler Gesendet: Donnerstag, 11. Juni

Hi, we set up two conferencing systems with three cameras attached to a Lifesize Room 220 a couple of years ago. Since the Room 220 only supports two cameras (HDMI), we added a switcher. It was indeed

I have used these commands for a?Christie UHD651 Monitor Baud 115200 Power On-?SETQUICKSTANDBY off\r\n Power Off- SETQUICKSTANDBY on\r\n Poll Power-?GETQUICKSTANDBY\r\n

I haven't used that particular panel but had a similar issue with the access series. When first used I had it communicate over RS232 but after a hard power cycle I had nothing. I tried Christie

We just received this Planar television model SL6564k. Has anybody worked with this TV? I've tried using the Crestron module for this device and could not get it to respond to any commands. I tried

According to the Crestron/Sonos webinar today the API has not changed.? So SIMPL Sonos modules, smart graphics and Crestron Home should be unaffected.? The majority of the changes are related to the

It’s been a long time since I’ve done anything with Lifesize (and even longer since I’ve done Lifesize with a Lifesize camera) but last time I did the cameras were using something CEC-like but

My latest article, "Integrating a PurpleAir Outdoor Air Quality Measurement into a Smart Home” is being published by the good folks at Residential Tech Today Magazine on their web site. This article

Rambling story time! We had a "consultant" specify some of those Christie UHD861-P displays into a job. Panel turned on exactly one time before dying (field techs turned it on to change inputs and

Good Morning, I'm looking for an HDMI switcher that can work with a Lifesize Icon 600, the camera control is over HDMI which is the big hangup. I tried an Extron SW2 HD 4K based off some vague info I

There are a number of console commands that deal with Cresnet devices. A couple of my favorites are: PPNDISCOVEr - this will return a list of all Cresnet devices with TSIDs (PPNs) listed, which are

Dear All, Kindly tell how to change cresnet id from console command Plz prompt reply Thanks, Rajat Dwivedi

Like others have said, it's likely from the AppleTV, not Crestron. I've seen the same issue with AppleTV (Netflix app) and Pioneer AV receiver setup. Dialog channel missing from the speakers. We've

Wow. Considering the amount of times stuff broke with just a minor version update within “S1”, that everything still works moving to what we’re led to believe is an entirely different OS is

What URL are you using?