开云体育

Chip, The 7500 I believe is a true DP Projector, the 4500 is their value product and I believe its a rebranded Vivitek (although not 100% certain), I do know that the base chassis is not DP. This is

This happens if you don't put a value in the File_Name_Prefix parameter. To stop it from happening put something in there. Someone also mentioned that strings weren't working properly because of an

If you pulse the FB of the join created in VTPro the entire audio file plays once regardless of how long you hold the button. If you hold it for longer it still only plays once through. If I want it

Are the displays or projectors HDCP compliant?

Hi all, I'm looking for the Ir code for the remote 1GD-IRAn. My learner, refuse to catch this remote signal. If somebody have this code please? Many Thanks

I found this module on this site but am getting the following error: FILE NAME PREFIX FAILED I left the prefix as it was which is \\NVRAM\\ Any idea what I might have done wrong? I know NVRAM works as

I've done a bunch of combinable rooms in my time. Sometimes they are fun, sometimes not so much. They usually give you a sense of pride and accomplishment when they work well though, especially the

Sent.

* Is this a new Error message on a previously working DM System? * You can do a System Reboot to see if that corrects the issue...I just had an error message on one of my systems and the reboot

Amen!

Does anyone know if there is a way to change a speaker profile from SIMPL on a SWAMP zone. The scenario is that we will have 2 zones to accommodate a TV speaker bar and 4 ceiling speakers. When a

"Just did an eVision 4500 the other day, the projector is PJLink compatible, save yourself the hassle and use that instead" That's a little bizarre. I'm working with an E-Vision 7500 right now, and

"No. Like I said on my TSW-750 if I pulse the join, the entire file plays. If I hold it high, it repeats as long as join is high." I think he's asking feedback-wise? That the join coming in from the

Just did an eVision 4500 the other day, the projector is PJLink compatible, save yourself the hassle and use that instead. Side note, although the web utility shows that the projector is Room View /

Hi, Can anybody help me with DM error with the following message? HDCP ERRORS OUTPUT 1 - DM OUTPUT UNAUTHENTICATED OUTPUT 2 - SAME OUTPUT 3 - HDMI OUTPUT UNAUTHENTICATED I cant find these messages in

You need a UDP client with an IP of 255.255.255.255 using port 9. Send a string that consists of \xFF\xFF\xFF\xFF\xFF\xFF followed by the MAC address in hex like

No. Like I said on my TSW-750 if I pulse the join, the entire file plays. If I hold it high, it repeats as long as join is high. Why are you using Studio??????

We are just now integrating the NX8E into a crestron system. I was wondering if you could send me your module? willis (at) clarity-hd (dot) com Thank you!

I'm using the TSW series of TP's so I can't say. Have you contacted TB?

When you pulse it, the entire file plays, no need to hold it high. If you want it to repeat for longer than the clip, then hold it high for the length you desire.