Re: TSR-310 impressions
No experience with the TSR310 with CH but with Simpl and VTPro I have had no issues. In my experience, it is the best remote Crestron has ever made. Handheld wise.
By
MGmail
·
#252423
·
|
Re: TSR-310 impressions
Thanks for your input Pat.? Greatly appreciated.
By
michaelgwilson@...
·
#252422
·
|
Re: TSR-310 impressions
If you like your sanity, skip the TSR-310 even though it is a great remote on Simpl jobs, it is not so great on CH projects. I would definitely go with the TSR-310 as they have been rock solid. The
By
Pat Molettieri
·
#252421
·
|
TSR-310 impressions
I'm looking at adding a TSR-310 along with some HR-310 remotes to a Crestron Home setup.? The TSR-310 looks like a great remote but I have read numerous complaints about connection issues after the
By
michaelgwilson@...
·
#252420
·
|
How to use a button with the sensor input on TPMC-4SMD
I have a?TPMC-4SMD and I¡¯d like to wire a physical button or two to the sensor Phoenix connector on the back of my touch panel. Is that even possible? If so, how would I do that?
By
craigsalmond@...
·
#252419
·
|
Samsung RS232 Direct Volume commands
Does anyone have serial code for Samsung tv's to set to a direct volume level?
By
AV Ninja
·
#252418
·
|
Re: Arris Cable Box
I believe the -M indicates it is a Motorola.? There is a DCX3400 in Crestron DB. From: <[email protected]> on behalf of Rohan Dunbar <surrounded360@...> Reply-To: <[email protected]> Date:
By
MSTC
·
#252417
·
|
Re: UC-MX50-T design question
Add a control processor, switcher with audio de embedder and control sources from page 2 on touch panel.. The content of this email is intended for the person or entity to which it is addressed only.
By
Surya Mohan
·
#252416
·
|
NVX Director Alternative
I remember that it was mention in a thread, I just can't remember when?? Someone had posted an alternative to using a NVX-DIR with 3rd party software.? I have a small system that I am spec'ing and
By
John Gabler
·
#252415
·
|
Arris Cable Box
Does anyone have an IR file for an Arris DCX3600-M? Thanks in advance, Rohan
By
Rohan Dunbar
·
#252414
·
|
Re: Madix Control
Hi Scott, I was going through your thread, I am also having Madrix Control for example : [http://192.168.200.39/RemoteCommands/SetStorage=S1P1] how do I recall this using crestron. Many Thanks.
By
roshangujarathi77@...
·
#252413
·
|
UC-MX50-T design question
Have a client who has a few conference rooms going in. We had specified the UC-MX50-Z as the best solution. Now client would like to add a dedicated PC at each TV. Does anyone have a good idea on how
By
adks1010
·
#252412
·
Edited
|
NVX USB Routing
For any one that is interest I've just commissioned NVX USB Routing, working with a Logitech Camera and Shure P300 going through a USB hub. Equipment: 1 x NVX-363 (as USB Remote as Decoder) (Logitech
By
a.rounds@...
·
#252411
·
|
Re: Need Help in C-Bus lighting control to work with crestron. A matter of Emergency
I have modules that one of the team at Schneider kindly wrote. Would you like me to email them over ? If so please send me a message
By
Gumppy66
·
#252410
·
|
Re: Limited Number of Serial Joins?
That was it, thank you.? Working quick I guess, didn't even catch that and went right into a rabbit hole of overthinking
By
jmacd2918@...
·
#252409
·
|
Construct and XPanels
Working on creating my first XPanel in Construct. I'm using a project that has resolutions for TSW-760, TS-770, and TS-1070 panels and it works great on those panels. How do I specify which resolution
By
CDUB340
·
#252408
·
|
Re: Limited Number of Serial Joins?
You must be using the old xpanel
By
Eric Luckart
·
#252407
·
|
Limited Number of Serial Joins?
I've never had an issue adding a large number of joins, but SIMPL just caught me off at 127 serial joins on an Xpanel.? This is my first time programming for an RMC-4, is that possibly the
By
jmacd2918@...
·
#252406
·
Edited
|
Re: Need Help in C-Bus lighting control to work with crestron. A matter of Emergency
Hi Simon, Do you still support the module? I put an email through the website and hadn't heard back. How can I get this? Thanks, Dan
By
Dan Gawne
·
#252404
·
|
Re: Add device passcode to Crestron TS-1070 Touch panel?
If you have a programmed system already then you need to do programming in your simpl code and make pages in VTPro to make that happen. If it is a new system our software nVision Hydra has that
By
Gregory Oldacre
·
#252403
·
|