For any one that is interest I've just commissioned NVX USB Routing, working with a Logitech Camera and Shure P300 going through a USB hub.
Equipment:
1 x NVX-363 (as USB Remote as Decoder) (Logitech Camera and Shure P300 connected to USB Hub then into USB-A Host port)
1 x NVX-360 (as Local as Encoder for BYOD) (NVX USB-C port)
1 x NVX-360 (as Local as Decoder for Client PC)?(NVX USB-C port)
1 x MBeat USB 3.0 hub. Is USB 2.0 compatible.
I found that USB-C to USB-C cables would not work for the Local ends, had to use USB-C (NVX-360 end) to USB-A (BYOD and Local PC ends)
Using the Serial joins on the Simpl Windows NVX? block to perform Auto Join Routing Layer 2 MAC Addresses
This was for UC Soft Conferencing system.
System Uses Shure MXA910 ceiling Mic and Ceiling Speakers running off Shure P300.
I also used the Dante TX on the NVX-363 to route HDMI audio back into P300 for users who wont use USB audio, for local presentations.
Hope this helps any one trying to something simular.
