开云体育

Hi, I use two TSR-310 in my now CH homesystem. Before I was using it in a custom programmed system. It‘s absolutely true, even with the latest firmware and the latest beta OS4 release that this

Thanks for the reply. It seems that the experience with Simpl is a much better one than with CH.? Curious to know if anyone has used the TSR-310 with the latest firmware that is supposed to address

No experience with the TSR310 with CH but with Simpl and VTPro I have had no issues. In my experience, it is the best remote Crestron has ever made. Handheld wise.

Thanks for your input Pat.? Greatly appreciated.

If you like your sanity, skip the TSR-310 even though it is a great remote on Simpl jobs, it is not so great on CH projects. I would definitely go with the TSR-310 as they have been rock solid. The

I'm looking at adding a TSR-310 along with some HR-310 remotes to a Crestron Home setup.? The TSR-310 looks like a great remote but I have read numerous complaints about connection issues after the

I have a?TPMC-4SMD and I’d like to wire a physical button or two to the sensor Phoenix connector on the back of my touch panel. Is that even possible? If so, how would I do that?

Does anyone have serial code for Samsung tv's to set to a direct volume level?

I believe the -M indicates it is a Motorola.? There is a DCX3400 in Crestron DB. From: <[email protected]> on behalf of Rohan Dunbar <surrounded360@...> Reply-To: <[email protected]> Date:

Add a control processor, switcher with audio de embedder and control sources from page 2 on touch panel.. The content of this email is intended for the person or entity to which it is addressed only.

I remember that it was mention in a thread, I just can't remember when?? Someone had posted an alternative to using a NVX-DIR with 3rd party software.? I have a small system that I am spec'ing and

Does anyone have an IR file for an Arris DCX3600-M? Thanks in advance, Rohan

Hi Scott, I was going through your thread, I am also having Madrix Control for example : [http://192.168.200.39/RemoteCommands/SetStorage=S1P1] how do I recall this using crestron. Many Thanks.

Have a client who has a few conference rooms going in. We had specified the UC-MX50-Z as the best solution. Now client would like to add a dedicated PC at each TV. Does anyone have a good idea on how

For any one that is interest I've just commissioned NVX USB Routing, working with a Logitech Camera and Shure P300 going through a USB hub. Equipment: 1 x NVX-363 (as USB Remote as Decoder) (Logitech

I have modules that one of the team at Schneider kindly wrote. Would you like me to email them over ? If so please send me a message

That was it, thank you.? Working quick I guess, didn't even catch that and went right into a rabbit hole of overthinking

Working on creating my first XPanel in Construct. I'm using a project that has resolutions for TSW-760, TS-770, and TS-1070 panels and it works great on those panels. How do I specify which resolution

You must be using the old xpanel

I've never had an issue adding a large number of joins, but SIMPL just caught me off at 127 serial joins on an Xpanel.? This is my first time programming for an RMC-4, is that possibly the