开云体育

I had the same problem. I was forced to change the edid on the dmps input to 1080p. Default edid was 4k. Thanks, Ephrain

Hi, we’ve seen the snow effect with non crestron kit with when switching between multiple sources. ?Deselection and re selection of sources always fixed the problem. Not ideal… In the end we

Hey gents, I've just been struggling with this issue myself and managed to get the V5.0 to ramp volume if I latch the "Initialize" input high as well as the "Poll Enable"

We are experiencing an issue with HDCP and a very specific setup. We have a small form-factor PC connected to a Crestron HD-DA2-4K-E. Output 1 of the DA goes to a DMPS3-4K-150-C, output 2 of the DA

Qsc cameras with a USB io bridge seems to work well. And a core110f obviously...

Cannot say I've notice any issue trying to open multiple instances of SIMPL -- even with the version of SIMPL that came out last month.? But instead of double clicking the SIMPL file to open it, I

Boy, do I agree with this!!? A Total PITA!!? none of my other programs do this...:(

Chris, When I start programming, I instinctively start 3 instances of Simpl Windows. One is for my main program, and the other 2 for auxiliary programs or module edits. What is a PITA for me is that

I have never heard that advice and virtually always launch SIMPL via the file (double clicking the SMW, using the arrow keys to highlight the SMW and pressing enter, or using the “Open SMW”

Hi All, In the long-past, I would routinely open projects by 2x-clicking the .smw project file, which would start a new instance of SMW and open the project together. At some point in the last few

I have used Icron Raven USB 3.0 extenders and most recently the Inogeni Toggle USB 3.0 switcher which has RS-232 control. USB 3.0 switching and extending still seem relatively new so there are not a

Try configuring in Studio or using Engraver

I can help with that, drop a line or call 828-506-1584 Thanks

Speaking about interlaced sources does anyone know if nvx always deinterlaces prior to encoding? Or is there a way to output an interlaced stream when subscribed to an interlaced source so that your

I'm hoping some of y'all have found a solution to this seemingly simple problem.? With the increasing prevalence of USB 3.0 only cameras to UC *and* BYOD destination requirements, have any of y'all

30 Hz is the maximum 1080i input frame rate supported (so 60 Hz field rate). I'm assuming when you say 1080i 50Hz, that's the field rate, and you really mean a 25 Hz frame rate. And yes, the NVX-363

Thanks again Andy.? I found the properties. My mistake was looking at the HttpClientRequest properties instead of the HttpClient. Jay

Another, "I don't know why it works, but sometimes it does" thing to try is deleting the SPlsWork subfolder in your program folder. I've had the same thing, where I've double-checked all targets,

Thanks Andy! I looked at the S# documentation and didn’t see that. I’ll take another look. Thanks again Jay

I have an Alienware laptop and use a WD19TB docking station. In my case I run dual 4K monitors, use the ethernet and every USB port on it. I bought 2 units off eBay at a tremendous discount off retail