开云体育

Deleting the SP Work folder before compiling has fixed this issue for me. I don't see it often but Clearone, DMPS3-300 and SX80 module would crash it Simpl. Years ago this issue happed for an Extron

Have you tried deleting the SPIWork folder and doing a recompile-all? Crestron@...> wrote:

Actually No, it is only when I have both the Clearone and the Cisco module, if I have just one or the other it compiles fine. If I change the order of the modules in the program tree it crashes during

"Can someone try and reproduce this" I'm going to hazard two guesses - that you'll get a crash even if you remove the ClearOne processing module. If you comment out the Cisco module, then it compiles

I have programmed about 70 Crestron jobs with them and we sell one on just about every Savant job as well. The original MMS-2 had some hardware issues (hard drive, Ethernet card, power supply), which

Oh, sorry. I was thinking of the outdoor temp and setpoints. I don't believe there is a way to use an external input for the room temp.

Seems like it should work directly, i.e., the temp format for the CNX-Bx keypads is the same as the TSTAT. Crestron@...> wrote:

Hi all, I have a system where the designer does not want to see any remote temp sensors for HVAC, but we do have CNX keypads in the walls. Is there anyway to use a CNX-xBTN keypad as a remote temp

Ok, Rolling back either the Crestron Database or Device database various versions did not resolve issue. Can someone try and reproduce this: New project with: -DMPS3-300-C -ClearOne Converge Feedback

Ok, installed Crestron software on a pc never having had it installed before and same issue. So to summarize: -same code but with 2 Series DMPS: compiles fine -with 3 Series DMPS3: crashes - crash

I'm not sure what goes wrong. 12V trigger from the projector goes to small relay and output from relay to versiport. So it's just a dry contact. Nothing else connected on versiport. Dňa 15.2.2016 o

Hey Guys!, I am wondering why there are no talk about using a Microsoft Surface Tablet as an alternative to an iPad or Android tablet. With the price of microsoft surface tablet dropping in price like

I saw reply from oliver.hall@... and need to fix my answer. So we have 16 bits that can have a maximum value of 1111111111111111 =65,535 2^16 = 65536 and since we start at 0 the largest

If you can send it to me that would be awesome – Lincoln at controlworks dot com or http://sendit.controlworks.com/ (second option, enter my name in the box) TIA, Lincoln -- Lincoln King-Cliby, CTS,

Yes, all of the devices pointing to the same processor would have the same CIP port (default 41794). I'm not sure why it would be working otherwise either unless they are ignoring your port settings

I'm having the same or a very similar problem - DMPS3-300-C-AEC just installed, Cisco C40, two Cisco cameras connected over Vaddio One-Link units. The Cisco stuff is all existing and as far as I know

I usually add a pro2 slave to the program and move all dedicated connections to it and then replace the pro2 withe the pro3. Seems to work better that way.

Try a different computer.? I've had Crestron tell me it my computer and they made me uninstall all Crestron software and reinstall.? Mine used to crash alot more but now does better.

The dmps has to be told what network the usb ext reside on.? All the USB ext have to be on LAN or patched into a DM lan port.? You can't have some on one and some on another.? I've tried both

Well said. One needs to remember that making everything easy, for the end user, is often times quite complex (at the back end). Good Luck and Best regards, msm Sent: Monday, February 15, 2016 6:00 PM