S+ Basic Question
How do you latch a digital output signal in S+?
By
enidsaldin@...
·
#211342
·
|
Re: Sunbright TV
Did you find this? https://www.sunbritetv.com/media/pdf/codes/RS232-control-codes.pdf Each command is two hex characters. Power On \x1B\x41 Power Off \x1B\x42 ... ... Hope that helps
By
Owain Price <oprice@...>
·
#211341
·
|
Re: Experience using "USB-EXT-DM Control v1.0" module with USB-EXT-DM?
I think I used the same scheme as my default router, just changed the last 3 digits to 255.
By
Ephrain81
·
#211340
·
|
Re: Experience using "USB-EXT-DM Control v1.0" module with USB-EXT-DM?
It varies.? The IT staff provided it to me.? Someone chimed in earlier and said you can enter the broadcast address in the standard USB ext module.? Maybe Crestron updated it and you don't need the
By
Ephrain81
·
#211339
·
|
Sunbright TV
I have to control a Sunbright TV's power and volume control on a job, and I can't find any good information anywhere. I found the 232 protocol but there is barely anything there. no form to it, no
By
stainbow1@...
·
#211338
·
|
Re: Hostname Found Triggering Events
That doesn't sound very secure. All I need is wireless access and that special host name to unlock the clients house? I would go down the route of an API based service like IFTTT or Life360 as its
By
Code radio <code_radio@...>
·
#211337
·
|
Re: Experience using "USB-EXT-DM Control v1.0" module with USB-EXT-DM?
Do you know what the correct broadcast address is going to be/look like off the top of your head? It¡¯s been a looooong time since I¡¯ve engrossed myself in IP broadcast addressing. Looks like the
By
Lincoln King-Cliby
·
#211336
·
|
Re: Compile crashing
"Yes, this has been an issue for months. It wasn't recent." Honest - I had a program handed to me that's had incremental updates done to it over the past month or so - no issues compiling. It wasn't
By
cfm@...
·
#211335
·
|
Re: Experience using "USB-EXT-DM Control v1.0" module with USB-EXT-DM?
That's what the custom module was for, it allowed you to manually enter the broadcast ID.? Crestron created it and sent it to me
By
Ephrain81
·
#211334
·
|
Hostname Found Triggering Events
I need some help talking through some pseudo-code. What I am trying to do is automatically perform actions when a specific hostname is found/not found on the network or a better way of accomplishing
By
ollieandsifle@...
·
#211333
·
|
Re: OT **Microsoft Surface Tablet** No RT Version
We have a few Surfaces in the office and I am using a Surface Book for programming. Of course it works great for X-Panel too, especially for demoing to a Customer. However, as a tablet for a
By
jbudz1977
·
#211332
·
|
Re: Vaddio One-Link, Cisco PHD cameras, and C40 question
I've seen this issue a lot with the Cisco cameras and the Vaddio One-Link extenders. Vaddio said it was surly a Cisco issue and Cisco doesn't care since it works fine when the cameras are directly
By
jbudz1977
·
#211331
·
|
Re: Experience using "USB-EXT-DM Control v1.0" module with USB-EXT-DM?
It doesn't need a different module, it just needs the correct broadcast address (cannot be /24 due to the internal network config of the DMPS). We have a lot of them working reliably once the network
By
Paul Armbruster <p.r.armbruster@...>
·
#211330
·
|
Re: Compile crashing
My point was that he would have access to the beta software then which might solve the problem. And many times, people post all kinds of issues on labs, not just about the beta software,
By
Andrew Welker <andrew.welker@...>
·
#211329
·
|
Beta Brite Signs
Does anyone have a Beta Brite sign module that allows for inputting custom messages via touch panel keyboard? If so, willing to share or sell? I have control of the sign, just trying to avoid spending
By
creativecommands
·
#211328
·
|
Re: Compile crashing
Labs is for beta only. They will refer you back to tb. Submit an online help ticket on crestron.com and include all the info you can
By
slip.cougan@...
·
#211327
·
|
Re: Compile crashing
Because TB has nothing to do with fixing it. They aren't the software engineers that created the program. All they can do is report problems up the chain. You might have better luck asking your rep
By
Andrew Welker <andrew.welker@...>
·
#211326
·
|
Re: Compile crashing
Yes, this has been an issue for months. It wasn't recent. I just use Alt+F12 now. As Chip said TB is aware of it, but it doesn't appear like they have any plans to fix it.
By
jcallaghan0176
·
#211325
·
|
Dynamic SubPage Selection
I've been playing around with a 'general' iPad control package concept and after some useful previous advice I have finally conquered Dynamic Icon Lists and how to control them via an NVRAM file. But
By
enidsaldin@...
·
#211324
·
|
Re: Compile crashing
It is a some what "known" issue. I get the same thing with the Polycom HDX9000 v3.3.3 module. Recomplie all always works. I'm going to look into the Keypro module
By
Debugger
·
#211323
·
|