开云体育

I'm trying to use this for a Volume Control Left Arrow Mute/Unmute Right Arrow Am I missing something or does this Smart Graphic not allow me to Change the Mute Icon depending on it's state?

I want to look into creating Themes but have been stopped at Step 1 :( I assume it's supposed to be accessed from VT-Pro but it's grayed out. What do I need to do to activate it? Also, is there any

This is an old post but I was just having this same issue. It came down to how the command is "built" in the SIMPL+ module. It takes the channel digit, multiplies it by 4, and then converts it into

Hey guys, I've got 5 (TSW) panels and a client wants an intercom system. I don't need a server if it's 8 or less panels, correct? Any pointers? Gotchas? Thank you,

If you can afford it, buy an RMC3. If not, get a QM-RMC off of ebay (should be able to get one for under $50). You can do almost all of the entry level Smart Graphics stuff with it on an Xpanel or via

Does anyone have any experience with Controlling a Fusion Ovation OMS-3 using the Control Works Module? it says it is only compatible with 3 Series Processors. Talked to Control works and they said

LOL, I forgot that they made some 2 series without Ethernet... yeah, that's no good for learning.

That’s more or less my point – no S+, no ACOMP2 (oh, how dearly do I love that symbol) – forces you to be creative and understand what’s going on under the hood. There are a number of places

ZeroDay Technology Solutions has opportunities for AV Engineers/Integrators willing to travel. If you are interested, please send your resume to opportunities@.... The following

Also everything is Ethernet today… Who wants to load programs with an RJ11 to DB9 to USB adapter? Sent: Thursday, February 11, 2016 9:33 AM To: 'Crestron@...' Subject: RE: [Crestron] Re:

It's my opinion that you should learn how to code without having access to S+ because you'll learn better habits that won't bite you from being spoiled with some of what S+ can do. This conversation

Agreed. While there's obviously some value in being forced to use the basics on an older processor like the ST-CP, a programmer really needs to learn how to use the more current facilities that are

I don’t get it, it doesn’t support simpl+. Most every receiver and advanced AV device uses simpl+ inside its modules. This means he can’t load or use most modules from the Crestron database.

Yep, I think learning on an ST-CP is a great idea. Crestron@...> wrote:

where is the "like" button? I'm with Lincoln on this one

I'm still (loosely) hanging on to my comment from a few years ago that any new programmer should be forced to learn on a ST-CP -- the limitations of the platform relative to newer processors can

The point I was trying to make is that learning in an outdated processor would cause them to learn certain things that don't apply to the current processors. My "break before make" comment was a poor

I've done with UDP Client using port 12287 with the ip table set to 255.255.255.255 When I last did this on a PRO2 with a Dual Nic, with the address set to 255.255.255.255, it will be interpreted as

"Break before make" is a function of the symbols that are driving them, not the signals themselves. X Gen most certainly had break before make symbols - all the way back to the Cresnet IIP systems.

However, because the Extron protocol is so simple, it's a great way to _learn_ how to make a module. My first module was for an Extron switcher. There is a file in the Files section of this group