开云体育

Clear the temp files from your browser. That's all I can think of right now... Tray Sent from my Samsung Galaxy Note?, an AT&T LTE smartphonerlf79cm <rlf79cm@...> wrote: I've updated my

I've updated my xPanel but whenever I compile and run it through the browser it's showing the old version - I've tried renaming, running it from the PC, processor, etc - always showing the old

Hi all Can anyone please help?? with an issue on the Naim NS02 server module (just uploaded this to the files section) This module was working fine until the latest Crestron and device database

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/Naim audio server module.zip Uploaded by :

yes, u tried but nothing happened still disconnected plzzzz help

You are correct that the module I am referencing is the 'Tandberg MXP Processor v1 (cm)'. Tried increasing the buffer size a few times, and still would not fix it. In the case of the Tandberg making

I am having some trouble using the volume feedback from this receiver to drive a analog gauge. With other devices, I use a lookup table in the serial i/o to drive an analog initialize, and an analog

Sorry I missed your reply, been away for a few days, thanks very much for the info, will wire it up and give it a go!! P

A couple of obvious things... 1) Make sure you're using one of the HDMI outputs on the Oppo, not the input. 2) Try both HDMI outputs on the Oppo - HDMI 2 has a less complex signal path and thus

Can anyone please help. I have a Newly Installed Oppo BDP-103 installed behind a HD-MD8x1 and I cant get it to provide a signal via the HDMI. Any suggestions... what am I doing wrong...

Lots of improvements. Now uses a TCP IP symbol for connection and won't throw any errors. Makes it easier to handle when and why it connects. Make sure to update the ra 2 firmware to the newest. Eric

I had a similar issue with a AV2 and the simpl+ modules that I was using from BSS would lock it every time. I could load the same program to a cp2e at work and it would work fine, both had v4.003

What about text console and try init and reboot then reload current program?

I just brought my useless ReplayTV to Best Buy two weeks ago, they have recycling programs. Just need to check their website for your area. ________________________________________ Sent: Saturday,

I sympathize with OP, I hate throwing out what was once useful and I see it as still maybe useful. It was painful when I upgraded my Replay series 5000 boxes to Tivo Series 3 HD's... I kept them for a

Try booting up bypassing the program. You'd need to recompile the program that's in there (I thought they got erased on that major of an upgrade but maybe not) with the latest simpl +

Also, I have tried HW-R about 2 -3 times with no success.

Hi Guys, I am currently on a site where I tried to load a new project in AV2 that had firm rev 3.137 and system kept rebooting itself. So I performed SW-R to bypass the program and then upgraded the

How about using it as a chair warmer?

if you mean the parameters at the bottom of the touchpanel symbol its 255d. Regardless I should see the whole string in debugger if all is well correct?