Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Bpq32
- Messages
Search
|
BPQ32 Protocol Question
I am curious if the PROTOCOL for BPQ32 can be anything other than KISS? |
|
ARDOPC, Pi and QDX?
#ardop
Hi all,
I've been having a bit of a dig around, and I'm wondering if this combination is possible, potentially with some changes to the source? Some background, I have a QRP-Labs QDX 3a (not yet built), it's a 5W digital modes transceiver, but with a catch, it can only do a single frequency at a time, without phase. The microprocessor analyses the incoming audio, works out the frequency and generates the RF from a clock source. So FSK possible, no PSK. It does work with HF APRS. It's also extremely light and portable (~150g). I briefly looked up the ARDOP specs and only superficially understand them, and have looked at what I believe is the ardopc the source. Is it possible to tell ardopc to only use 4FSK modes? (I'm thinking potentially strAllDataModes in ARDOPC.c.) Does doing this make sense at all? Is there a better way to do this? If this can be made to work, it potentially adds a very small and lightweight multiband HF transceiver to the list of radios that can do Winlink. Regards, vk3tst/5wtf |
|
Re: Complete Commands List
#pilinbpq
It's under the sysop commands section John. Probably from v4.08 days Steve? On Mon, 8 May 2023, 06:26 John G8BPQ, <john.wiseman@...> wrote:
|
|
Re: Complete Commands List
#pilinbpq
There's a consolidated 'cheat sheet' for node, sysop and bbs commands at?
I've documented my attempt at a custom node application at??- the cmdport syntax in the official docs confused me, sorry John!? Also note this version uses systemd rather than inetd.?? Martin |
|
Re: Complete Commands List
#pilinbpq
开云体育You may be thinking of the extended ROUTES command (R R) which I've just noticed isn't documented.73, John On 07/05/2023 21:46, Tommy Brooks via
groups.io wrote:
Yes, I've used that list, but its the unofficial commands I'm interested in. I've done some digging in the code but haven't found where those commands are defined yet. |
|
Re: Complete Commands List
#pilinbpq
开云体育The Node command list is in Cmd.c, in variable COMMANDS[]. There may be the odd command in there that is still under test or intended for debugging, , but if you find anything useful that isn't in? or SYSOP.html let me know and I'll add it.73, John On 07/05/2023 21:46, Tommy Brooks via
groups.io wrote:
Yes, I've used that list, but its the unofficial commands I'm interested in. I've done some digging in the code but haven't found where those commands are defined yet. |
|
Re: Complete Commands List
#pilinbpq
Yes, I've used that list, but its the unofficial commands I'm interested in. I've done some digging in the code but haven't found where those commands are defined yet.
One such command in particular pinted the heard stations and their quality. I'm wondering what other commands may aid in station setup or testing. |
|
Re: PERMITTEDAPPLS not functioning in config files....
开云体育If someone can connect directly to application not in PERMITTEDAPPLS on an ax.25 port then that needs investigating. But users can connect to the node then use any application.73, John On 07/05/2023 17:14, Bruce Colburn via
groups.io wrote:
Unfortunately on the port identified below, PERMITTEDAPPLS is not working - Whether they attempt to attach to the SSID for the APPLS or via the node, it seems they still have access to the application in question. I had a new young ham this past week grab the WEB application and the RMS application that are not listed as permitted on the Packet 300 HF port. Though I did have a short talk with him over email to let him know those both eat up the HF band, and he now understands why that creates an issue, I cannot lock out those two items on just that port it seems. I do need those available to the VHF side locally. This was also tested both ways on two nodes, mine and WE1H who has a DXC(luster) that he wants unavailable to HF Packet. |
|
Re: PERMITTEDAPPLS not functioning in config files....
Unfortunately on the port identified below, PERMITTEDAPPLS is not working - Whether they attempt to attach to the SSID for the APPLS or via the node, it seems they still have access to the application in question. I had a new young ham this past week grab the WEB application and the RMS application that are not listed as permitted on the Packet 300 HF port. Though I did have a short talk with him over email to let him know those both eat up the HF band, and he now understands why that creates an issue, I cannot lock out those two items on just that port it seems. I do need those available to the VHF side locally. This was also tested both ways on two nodes, mine and WE1H who has a DXC(luster) that he wants unavailable to HF Packet.
Greg - N3BYR |
|
Re: Complete Commands List
#pilinbpq
Try this:
The normal BBS commands work for the bbs as well. I'm sure there are undocumented commands. |
|
Re: No remote nodes showing in NODES list
On 5/6/23 19:41, Tommy Brooks via groups.io wrote:
There are several BPQ nodes within one digi hop of my node, and they are not being added to the NODE list. ...Only 'node broadcasts' from 'bona fide' nodes are processed and stored. 'Node broadcasts' are not digipeated. Should these nodes automatically be added to my table, or is this behavior normal?No, digipeated packets should not be processed. Yes, this is normal behavior. 73, Chuck |
|
Re: No remote nodes showing in NODES list
开云体育KaNodes are not NETROM nodes so do not get added to the node list. As far as I can remember, KaNodes do not do any multi-node routing; they DO allow you to connect to a second station (node or user station) while connected to the KaNode, but that is about it.Jim KA7EHK
|
|
Complete Commands List
#pilinbpq
Is there a a complete list of commands for the LinBPQ terminal? I've seen several thrown around on the group that aren't listed in the instructions or the ? prompt.
|
|
No remote nodes showing in NODES list
I'm slightly confused about the NODES table. There are several BPQ nodes within one digi hop of my node, and they are not being added to the NODE list. The digi's in question are KA-nodes, but the BPQ nodes are in my MHEARD list, and a few are also available directly, without a digi. Should these nodes automatically be added to my table, or is this behavior normal?
|
|
Re: PILINBPQ RIG CONTROL
开云体育RESOLVEDAfter beating this to death, I discovered that the problem was the parameter specification. The documentation shows in the scan lines section... F1-F3 - IF Filter for ICOM Rigs So I was using.. RADIO 7 14.1075 LSB F1 W Sorry?-?Set?Mode?Command?Rejected A bit lower there is a different format for command line entry RADIO Freq Mode Filter eg RADIO 14.112 USB 2 (ICOM)? ...note No "F" Now If I send... RADIO 7 14.1075 LSB 1 W0 Frequency?and?Mode?Set?OK Now, all the parameters are accepted. 73, Rick VA7RBP On 2023-05-04 1:18 p.m., Rick Paynter VA7RBP wrote: Well...I get |
|
Re: PERMITTEDAPPLS not functioning in config files....
开云体育Sorry it is a typo. Should be PERMITTEDAPPLS.On 05/05/2023 14:39, Bruce Colburn via
groups.io wrote:
John I do not see anything on your pages that covers PERMITTEDCALLS or its functionality. Can you post a link please or clarify? |
|
Re: PERMITTEDAPPLS not functioning in config files....
开云体育PERMITTEDCALLS? Did you mean PERMITTEDAPPLS as in the subject of this thread? If APPLS then see Specifically: PERMITTEDAPPLS=APPLS 73 de Rich WA3WLH
|
to navigate to use esc to dismiss