开云体育

Jim and John. Thank you for your kind and speedy replies.? With your help, I am up and running!? Have a great day! 73s -- Brian K9KQA

No sir - everything is set up using N4NVD as the Call.

OK, you don't by chance have a different callsign/ssid on your VHF port, do you? I'm thinking probably not, but I'm not coming up with much. 73, Lee K5DAT [email protected]> wrote:

You have a console running on ttyS0 which is normally symlinked to /dev/serial0 - vc_mem.mem_size=0x40000000? console=ttyS0,115200 It looks like you need to use rasip-config to disable console on

Hi, thanks John, I've sent config directly to you for any comment/issue. Excluded, got it. If it starts to crash again I will try this. What's the difference between this excluded checkbox and the

Brian, Here are a few things to check/set. Run raspi-config, check the serial console off, then serial port on. remove power (you can leave the sd card out) turn pot R6 on the tnc all the way CCW

Hello I'm stuck!? I have an old TNC-Pi3 that I want to set up as a Winlink RMS.? I was able to find a copy of a bpq32.cfg currently in use on an identical TNC-Pi, so I just changed the relevant

To lock someone out set Excluded in User record. Can you email me your bpq32.cfg and a BBS log showing the crash? 73, John

Hi Lee - Yes, you're understanding it better than I said it <grin> - this is only happening when connecting on the VHF port, and connections to the Chat and node aliases work just fine, but the BBS

Hi Charlie, [email protected]> wrote: Are you referring to only incoming connections on VHF? ODDLY, the RPi does NOT SEG fault when called over the air on any other I think based on the above

Thanks in advance for your attention.? I'm really stumped by this one. My BBS will die with a SEG fault at connect over my VHF port, but NOT when called over the internet (AXIP port) or from the

Hi Glenn, Thanks for the message and info. Very Interesting. I am not fully up to speed on forwarding - but when I checked my node's config I did have a rule for n2mh it was something very simple,

Hi, I'm not quite sure - only significance is that is Mark's node, the new link we were adding in. Where would I see this? Could there be a problem with ssid suffix routing or forwarding, or some

My node is located at the Arts Center where any and all changes are executed from the computer.I'll double check the mail forwarding script tomorrow on Monday when I? get there.In the interim, please

To the Group, I think that this post has evolved into two separate issues. 1. Problems with bringing up a link between my jnos system and KD2YCK's bpq system. 2. A forwarding problem at

N2MH-8 is a J-Nos system, those errors I believe are coming from his side. I was watching that port yesterday and WW2BSA looked like he was having the same problem. I forwarded with Mark a number of

Hi Louis, I don't recognise the messages - do they mean anything to you? It looks like the AXIP link is somehow getting connected to the BBS. Do you see in Incoming Connect message for N2MH-8? I

Hi John, thanks very much! I do see a lot of these in the logs, I think from when the new axip UDP link is started up 250426 18:42:34 >N2MH-8 ? ?Too many errors - closing 250426 18:42:34 >N2MH-8

John, Up to now, it seems to me that it crashes only when KAM port is used to initiate (or receive) a g-tor or pactor connection to/from the other station (UT1HZM, who also runs a KAM). It sometimes

It is crashing in the BBS code when processing a command. What does the BBS log show? It is possible that due to a config error a message is bing incorrectly sent to the BBS. Unfortunately the