开云体育

I'm one of the one's that won't. I LOVE my BXA. No problems with using it that the original lantern post won't solve, although I haven't used the lantern post in more than 4 years. It holds 1/4 inch

I’m using a Yuasa AXA originally purchased new with my 3996. There are two problems with the BXA. One is that everything about it is more expensive (including additional holders which you will need

I agree with GP,.if you need to save money, go with the CDCO tool post. They are nice and I have no complaints.? The holders are inexpensive also.-Jody

I have an AXA from CDCO, and love it. I will say do not get rid of the lantern tool post if you have one though. The more I use my old machines, the more I realize they are best used how they were

I used an AXA-size on a 12" Atlas, and think a BXA would be way too big. The big issue is that the larger BXA holders will not go low enough with some tooling. The AXA has the slot for the tooling

You might get away with AXA. Not sure on the 13 Get Outlook for Android<https://aka.ms/ghei36> ________________________________ Sent: Monday, January 14, 2019 8:52:32 PM To: [email protected]

I have 2 wedge type holders from CDCO tools. in Chicago. I am happy with them tool holders are no problem they have plenty GP --------------------------------------------

I asked this question a year and a half back, being my first lathe, and having just rebuilt it I got the answer to be AXA.? It was the choice for 12 and under. I belive you could get away with BXA

I want to switch QC tool posts for something I can easily find extra holders. Looking at the Aloris fit chart an AXA is called out for all Atlas lathes. It looks like a BXA would also fit. What size

Proof that you can do a lot with a little!Nice. Dave Matticks? Sent from my T-Mobile 4G LTE Device

As I think that I mentioned earlier at least indirectly, the same 10D-603 tailstock was used on the 10” and 12” lever operated tailstocks and tailstock turrets. So actually four accessories,

AMAZING and exemplary work here! Jim I

Wow, a separate casting for a limited production accessory! Those were "The Good Old Days!" I have tinkered with the design of a capstan feed tailstock but with the capability of having a driven

Hi Bill . . . Factory Here is an extract from the catalogue from the “Good Old Days” Regards, Carvel Sent: 14 January 2019 12:31 AM To: [email protected] Subject: Re: [atlas-craftsman IO]

Hi qanthony87 Thanks for the video on presses. I had not seen that one. Pete McLaughlin

I have a 10" Tailstock with the lever action and 6 position turret and 6 position stop..Really great piece for doing a large quantity, I used it once..Found two complete units at the scrap yard about

Not my lathe, but photos of another fellows (he may be a member of this Group) capstan tailstock mod and other ball handles that he installed on his lathe. Regards,Steven R.?HaskellTroy, MI

Amen to that. On both counts. :-) Robert Downs Sent: Sunday, January 13, 2019 18:54 To: [email protected] Subject: Re: [atlas-craftsman IO] Iron Giants - Not lathe but still interesting Very

very cool.

It is an Atlas 695 (10”). On the standard 10D-6 Base. Robert Downs Sent: Sunday, January 13, 2019 16:31 To: [email protected] Subject: Re: [atlas-craftsman IO] 10" tailstock on a 12"