¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Re: Speaker
Indoors, in the shack, I use one of an old pair of computer speakers.? It came with the right cable and connector, so it just plugs right in and works.? Sounds better than the tiny one in the radio,
By DougVL · #661 ·
Speaker
Does anyone have a problem with the sound of their speaker? I have issues hearing most stuff from it, it sounds cheap. Does anyone use an external speaker? Or has anyone done anything to improve the
By DeWayne <dewayt@...> · #660 ·
Re: Nice, complete X5105 review, with much good information and tips
Thomas does a good job of using different radios and different setups each outing. Brian K0FBS -- Brian K0FBS
By Brian Smith · #659 ·
Nice, complete X5105 review, with much good information and tips
A nice article/review of the X5105, used for POTA/SOTA.? Good descriptions of uses, troubles, cures and add-ons.
By DougVL · #658 ·
Connect Systems
So one of you missed out on a swinging deal. I was about to sell my 5105 for a song. It was getting flakier and flakier. Original firmware from years ago. I hate windoz in any form but had bought a
By Mike Colyar · #657 ·
Re: Rotary Encoder Change
never changed any sinotel has them, they look hard to repair. https://www.sinotel.co.uk/index.php?main_page=product_info&cPath=5&products_id=271
By Jorge Canelhas · #656 ·
Re: Rotary Encoder Change
https://www.sinotel.co.uk/index.php?main_page=product_info&cPath=5&products_id=271
By Jorge Canelhas · #655 ·
Rotary Encoder Change
Has anyone swapped out the encoder?? Is it a pig to get the unit apart sufficiently to swap it? Karl
By Karl Haas · #654 ·
Re: Output power change during FT8 TX
Data from link.... *Hamstick Dipole Is A Practical and Portable Limited-Space HF Antenna ? 2001-2002 , Virginia RACES, Inc. - For Educational Use Only Steve Cuccio, NB30, NM, Old Dominion Emergency
By VE3SMF · #653 ·
Re: Output power change during FT8 TX
Tnx for the article. Will read this evening. Bye.
By capitano nemo <capitanonemo68@...> · #652 ·
Re: Output power change during FT8 TX
Good joke! I found a downloaded PDF about using hamsticks as portable dipoles.? Part of the article may be of help for our USB interference problem? I tried to copy and paste the text here, but this
Re: Output power change during FT8 TX
Tnx Doug for your answer. I'm not sure it consoles me to know that those problem may happen also with IC... Yes, Radioddity (very kind and patient support!!!) mentioned a lot of things mainly about
By capitano nemo <capitanonemo68@...> · #650 ·
Re: Output power change during FT8 TX
Did Radioddity mention the possibility of "common mode current' on the co-ax?? I have had troubles with my IC-706 with FT8 on some HF bands but not on others.? When I click "send" the radio buzzes 0
By DougVL · #649 ·
Output power change during FT8 TX
Hi everybody. Can you please give me advice on the following. When I transmit a msg (let say i reply to a CQ) looking the x5105 power meter -- first 5 seconds power apparently stable -- from 5 to 10
By capitano nemo <capitanonemo68@...> · #648 ·
Re: Adapter for IF out
Here's my 'Mini' or Micro' SDR and MCX adapter for X5105 I.F. output. It's part of a whole little "kit" from NooElec, about $35 from Amazon, but the MCX to SMA adapter was a separate purchase.? It
Re: Adapter for IF out
I just have a pigtail with the IF stem that goes into the 5105 and a make SMA on the other. That feeds into a USB SDR RX. I use HDSDR for the software. Brian K0FBS -- Brian K0FBS
By Brian Smith · #646 ·
Re: Adapter for IF out
How about a link for the device? How do you use the IF output?? ?'Frankensteining' a panadaptor for my X5105 IS on my to do list.
By Dan Quigg · #645 ·
Adapter for IF out
> > Found these on amazon here in canada, and they work perfectly! ?(15 bucks > for a pair)
By John Deboer <Johndb321@...> · #644 ·
Re: Transverter
That's the "key"! In this case, searching for "PTT" or "CE-19" might have given you some results. I often look for info on portable antennas, but others might have called it "field work" or POTA or or
By DougVL · #643 ·
Re: Transverter
Thanks Doug.? I thought I did search before posting, but not with the right parameters I guess.? I'll take a look at the posts. -- Clinton, VE7KNL
By Clinton Peebles <clinton2@...> · #642 ·