开云体育

I've been looking for a long time to find a scrubbing stick for my little Unimat. Either the parts on offer are totally rotten or outrageously expensive. I looked around for an alternative and found a small control / grinding vice. The jaw width is 26 mm and the clamping width is 25 mm. I have screwed this vice onto a plate so that I can attach it to my sled.

Hey Guys Gonna be stateside (NY State) for Yanksgiving, and am driving. Could bring my Unimat power feed along for a buyer if interested. Im looking for $300 Canadian or about $230 US for it + shipping, likely use the USPS Medium flat box to ship about $16 now? It has tracking if memory serves. If interested, let me know. Regards, Jeff??

Opinions Please What is a better choice, Unimat 3 or DB/SL? Dick -- http://www.homemadetools.net/forum/ OFF-SET-tailstock-center-65965#post105972 http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION

I have the original DBSL dividing attachment with 3 dividing wheels or gears. There is no good way of knowing what space or notch I am in as I can’t see the notch. I think this makes it very hard to know where I am. This is a short coming of this dividing system. I have considered making a stand alone dividing head. Has anyone in this group had a similars experience with this system? If so I would appreciate it if you could share how you work around this short coming. Thanks Dick -- http://www.homemadetools.net/forum/ OFF-SET-tailstock-center-65965#post105972 http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION

I recently acquired a Unimat SL Model DB 200. Motor was a little noisy, so I disassembled it, cleaned it up and put it back together. It runs well, but in CCW rotation. I believe it should be clockwise. I reversed the connections to the brushes, but it still runs CCW. Any advice would be appreciated. Thanks

Does anyone have some input on the erstwhile Edelstaal "cutting tool/slotting tool"? I found it in the Campbell Tools Co catalog for March 1983, entitled "Lathe accessories & Attachments" which is also in the files section (here), also see screen shot below. I would think that I have something similar, not complete - just a number of cutoff "knives" and a tool holder, this one coming from Komet. The knives measure circa 108 x 9,5 x 2,7mm, with the profile not square but set at an 80 degrees angle along the long side. The Komet tool holder has the same angle, so that the knife can be securely held in the toolholder. But there is nothing to mount this tool holder on the cross slide. How was this done - knowing that the knife set in the tool holder is not at the same height as the center. So I guess some additional mounting device would be needed. Does anyone have experience with these tool holders?

Does anyone have experience with the "Emco-Lux Adjustable Toolpost" that was advertised in the Campbell Tools Co catalog for March 1983, entitled "Lathe Accessories and Attachments" (see here and screen shot below)? Last September, one of these was for sale on Ebay and Mr. Pete has one video (#945) explaining how he went about adapting an incomplete such tool post. Apparently, this "Emco-Lux" toolpost has never been very common - I never saw one thus far, and references are isolated - like this one .

I want to know if any of you uses teh Unimat to build steam engines (stationary or traction engines). What do you think of the Unimat PC used manually compared to Unimat 4 (and 3)

-- http://www.homemadetools.net/forum/ OFF-SET-tailstock-center-65965#post105972 http://www.homemadetools.net/forum/s...995#post112113 SMALL TURRET TOOL POST PLANS http://www.homemadetools.net/forum/l...994#post112111 LARGE TURRET TOOL POST PLANS http://www.homemadetools.net/forum/m...383#post110340 MINI-LATHE CARRIAGE LOCK PLANS http://www.homemadetools.net/forum/s...191#post106483 SMALL QC TOOL POST PLANS http://www.homemadetools.net/forum/q...849#post119345 QUICK CHANGE LATHE TURRET http://www.homemadetools.net/forum/m...949#post119893 MINI LATHE COMPOUND PIVOT MODIFICATION