开云体育

Jeff, It's been a long time, but... When I needed to replace that oil pressure fitting, I was living "out indah woodts" in northern Minnesota. The nearest town (300 people) had a small hardware store.

You might be able to do a washer for a bit less but It just cost me $21 to ship a single cam pulley from SJ. Dave C

Bill, Polyimide (eg, DuPont Vespel) is a thermoset resin that is used to make high performance bushings and washers. It was first developed for use in jet engines. I've contacted one internet vendor

Well, never felt that way from SJ with them always responding promptly and even taking phone calls early in the morning and shipping a pretty big order right away when there was waiting for example on

WOW. For a small box, that is incredible, but understandable given the cost of jet fuel these days. Plus, I’ve heard that Steve doesn’t really like us Yanks, so don’t go out of his way to find

Seems that shipping costs have increased substantially from SJ as well. I have a shipment in transit for various small stuff in the amount of $265 with shipping costs of $165.??Jeff?Sent from my

I just paid $21.49 each from a US Lotus parts supplier for the Nylatron pilot bearing thrust washer, A079F4029F. Price at SJ was $7 plus shipping, but the wait could be a couple weeks. I am NOT

Hello all, I'd like to know best way to test oil pressure in my 907 engine.? In particular, I have a oil pressure tester/gauge but need to know best place to access oil pressure and size of fittings

I just installed a 123 distributor in an 84 Turbo Esprit. I haven’t run it yet so my opinion so far is based on installation and setup. It’s on the pricier end but it is a complete new

Great. That conversation was 2 years ago. I bought the FAST system, and it has been sitting on my bench waiting to be installed. Bigger problems came up, and cars, boats, and trailers came and went.

Bit more discussion here /g/S1S2euroS3LotusEspritOwners/topic/75878507#22071

Ian, Lotusbits in the UK lists a used E-cam for ?50. However, the parts listed on their website are examples, and being listed doesn't mean thay have it in stock. They're not good at returning email

I've had three Lumenition systems fry, and I'm not a big fan or Pertronix. I wouldn't buy another of either one... just my opinions. My Favorite was the Crane XR700 (XR3000 is more of the same). Crane

Dave, I would be very interested in reading the results of your investigation.? At $70.00 each this could solve a bunch of issues some of us are having without breaking the bank. Ian. -- This email

Sorry, no.? I was referring to the hump in the doghouse between the 2 chrome latches. However, just went and looked at mine and realized mine was the same and but never noticed it. -- Rich F '79 JPS

TYPO... darn it. I wrote: The standard Z-S only includes one. I meant to write: The standard Z-S REBUILD KIT only includes one. Sorry about any confusion. Regards, Tim Engel 07/25/2022, 10:09AM, Tim

SJ Sportscars has some Competition cam pulleys that have 5 keyways for different timing variations. With 5 keyways and the ability to run the pulley on 2 sides you have 10 different timing options for

Ian, Timing dots (drill points) filled with paint was a Lotus thing, and the Jensen-Healey didn't use it. They used a line/groove cut radially across the pulley rim for a timing mark, and engraved the

Toaph 1. Engine removal – Brace yourself for this one, but THEY ARE IN IT FOR THE MONEY. Maybe they need to watch my video to see how easy it is to do in place. If you are replacing all the coolant

Toaph, That shop is off your list... I get it. But just a different note after reviewing their quotation... The Zenith-Stromberg 'choke' (enrichment device) requires two gaskets. 1) One internal for