开云体育

I'm getting an error when I try to use direwolf with GPIO configured for PTT. I'm running Raspberry Pi OS on a Pi 2B. Raspberry Pi OS with desktop and recommended software Release date: July 4th

?Steve G8EBM? </g/RaspberryPi-4-HamRadio/message/15761#>? Steve G8EBM 6:18am #15761??? </g/RaspberryPi-4-HamRadio/message/15761> Sent: 09 July 2024

Thanks for your help Spence. What is strange is that today, after the pi-5 was set aside over night, I seems to work fine. I was able to get your Email and am about to send this on the Pi-5. I hope

________________________________ Sent: 09 July 2024 4:28 To: [email protected] <[email protected]> Subject: [RaspberryPi-4-HamRadio] email email to verify

Try opening a terminal windows and typing - ifconfig This should show you your network settings. I can almost guarantee that you will be missing IPV4 address but have IPV6. If so then you will

Definitely odd. I've seen that wit WiFi before, but not Ethernet ?Get BlueMail for Android ?

Ethernet Links: ------ [1] https://bluemail.me [2] http://groups.io [3] http://netins.net [4] /g/RaspberryPi-4-HamRadio/message/15757 [5] /mt/107202779/1275392 [6]

Wifi or Ethernet? ?Get BlueMail for Android ?

Using an 8GB pi-5 with NVme & SD card Problem with network?? Can someone figure out what is wrong from this, the only clue I found? If I hold down the shift key and use key to reformat the SD card and

email to verify

The RWS project allows anyone using an HF radio and a computer to access the internet from anywhere if needed, either because of an emergency or if you simply go somewhere that doesn't have

Hey Bill, Glad we could help. There are also a bunch of .tcl files associated with the PHP web stuff. They are located in /usr/share/svxlink under events.d and modules.d I seem to remember having

The touch command followed by remove-purge fixed the problem and I’ve been able to install all of the updates. Thanks for your help!

Hi Gregg, You conf file example helped me figure it out. Apparently, the web interface in NOT updating the TIMEOUT value in the port setup. I manually edited the file and set the timeout to 15,

Thanks for taking the time. I'll reverify all of this. 73 - BILL KA8VIT ________________________________ Sent: Saturday, June 22, 2024 6:41 AM To: [email protected]

Thank you, sir. I'll take a look. 73 - BILL KA8VIT ________________________________ Sent: Friday, June 21, 2024 9:43 AM To: [email protected]

Thanks. It’s the WSJT-X improved arm64.deb file using the Package Installer. I’ll try this and let you know.

Where did you get and install this wsjtx package from? It clearly has issues if it's trying to uninstall things from /tmp. Anyway, I've dealt with similar issues by simply re-creating the "missing"

No I just formatted the SD card. Installed the latest OS and then added Hamclock. Mike VE9KK

Take a look at /etc/svxlink/svxlink.conf https://www.svxlink.org/doc/man/man5/svxlink.conf.5.html Below is my TX section info.