开云体育

  1. RaspberryPi-4-HamRadio
  2. Messages
Single Messages Topics Expanded Polls

Re: Open Repeater

 

开云体育

Hey Bill,

Glad we could help.

There are also a bunch of .tcl files associated with the PHP web stuff.

They are located in /usr/share/svxlink under events.d and modules.d

I seem to remember having a similar problem with web settings not getting saved.?

There is an openrepeater forum located at:


Aaron (N3MBH) and Dan (KG7PAR) are very helpful in answering questions.

Your W8COD QRZ page is very interesting.

-Gregg WB6YAZ

From: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> on behalf of Box1600 <box1600@...>
Sent: Sunday, June 23, 2024 8:36 PM
To: RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io>
Subject: Re: [RaspberryPi-4-HamRadio] Open Repeater
?
Hi Gregg,

You conf file example helped me figure it out.

Apparently, the web interface in NOT updating the TIMEOUT value in the port setup.

I manually edited the file and set the timeout to 15, saved and rebooted.

Sure enough, the controller timed-out and the PTT line dropped after 15 seconds.

After playing around and testing with different values the timeout does work as expected if you manually edit the config file.

Now to look at the PHP/JS scripts to see why the timeout value isn't saved from the web interface.

So anyway, the TIMEOUT is now set to 150 seconds (2-1/2 minutes) and working great.

I appreciate you and everyone else that took the time to answer my plea for help.


For anyone interested, I am the Chief Radio Operator aboard the American Submarine USS COD SS-224.

We operate on the ham bands using the call sign W8COD.

Check out the COD's qrz page at:


Scroll down about half way through the page for links to some really cool pictures and videos.

Again, thanks for all the help.

73 - BILL KA8VIT / W8COD
W8COD personal biography
www.qrz.com


From:?RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io> on behalf of Gregg Daugherty <gregg-daugherty@...>
Sent:?Saturday, June 22, 2024 6:41 AM
To:?RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io>
Subject:?Re: [RaspberryPi-4-HamRadio] Open Repeater
?
Take a look at /etc/svxlink/svxlink.conf



Below is my TX section info.



On 6/20/2024 7:49 PM, Box1600 wrote:
It has nothing to do with the repeater, (which is an MTR-2000).

In testing the software we found that the GPIO output that controls the PTT line never unkeys if the COS signal is held active longer than the set timeout period.

Everything else seems to works as it should.

Thanks, I'll check out that SXVLINK group.

73 - BILL KA8VIT


From:?RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io>?on behalf of Teton Amateur Radio Repeater Association (TARRA) <tarra@...>
Sent:?Wednesday, June 19, 2024 11:04 PM
To:?RaspberryPi-4-HamRadio@groups.io <RaspberryPi-4-HamRadio@groups.io>
Subject:?Re: [RaspberryPi-4-HamRadio] Open Repeater
?

Hello Bill,

With this being the issue, it be helpful to know what you are using for a repeater.

You may also want to ask the question at the svxlink at groups.io? /g/svxlink

Mick - W7CAT
Join RaspberryPi-4-HamRadio@groups.io to automatically receive all group messages.