开云体育

[Raspberry_Pi_4-Ham_RADIO] wrote: Stan, there is a program called 'xming X Server for Windows' that will allow you accomplish what John mentioned. You can use it with putty to ssh in and grab a x11

Hi all, I just got my TNC-Black and am setting it up and can not get the ax25 working.When I run kissattach command i get this error "tty_speed: tcgetattr: Input/output error" I have my TNC set

[Raspberry_Pi_4-Ham_RADIO] wrote: Stan, like Alan I use xrdp also. XRDP is much easier to setup then VNC but as Alan said make sure you setup SSH so you can use PuTTY or some other terminal program

Thank you for your reply John. I should have mentioned it, but my granddaughter and myself are using Windows 7 on our laptops. 73 Stan GW3SRM

I am confused! Should I be able to run a Linux system (RoboLinux) remote with audio from a Win7 computer? -- John Ferrell W8CCW Julian NC 27283 It is better to walk alone, than with a crowd

If you are using linux, you can use ssh -X (pi hostname or IP address ) and run the pi's X-Windows session on your linux PC. The X-Windows runs better on a PC than it does on the pi. I mention this

Thank you for your very prompt response Alan. You have given me something to work on. I will have to find the previous posts that you referred to and emulate a setup with my RPi B+ before passing the

Hi Stan, just to kick the discussion off ....is this a firewall problem?? To use the desktop I used xdrp on the Pi and remote desktop connection from windows pc (see previous posts to the group) For

Greetings everyone, I am a new member. I have a problem successfully connecting a VNC (tightvncserver) between a laptop computer and a RPi B. The RPi B and the laptop are my 11 yr

Have you tried Vox mode on the radio? I read somewhere that it might need to be enabled for certain radios. Maybe that will get things transmitting?

Thanks for the tip on get get_ params. I have not got it working yet. I am copying other stations, but it won't transmit. Xastir says it is but the ptt lite doesnt come on.

Hi Jim, I'm sure you're aware of the WSPR Forum, otherwise it seems this is the place. It sounds like you've got what it takes - but I've found the antenna to be all-important with R-Pi-level power

If there is a more appropriate forum for WSPRRY, kindly point me there. I just installed WSPRRY on a model B. I connected it through a commercially-made 20m band pass filter to a large loop

If there is a more appropriate forum for WSPRRY, kindly point me there. I just installed WSPRRY on a model B. I connected it through a commercially-made 20m band pass filter to a large loop

If there is another forum more appropriate to WSPRRY, kindly point me there. I just installed WSPRRY on my Model B. I hooked it through a commercially-made band-pass filter for 20m, and am

You are getting further than I am. Still haven't gotten the pitnc_getparams to work right. I do have it setup in Xastir however, and it will let me start the interface, configured as serial device, as

1.) I got all lines from the TIGER census data for 2013. It has roads files for each county in each state. I do Features - All Lines then choose the State and County I want. Do this on a desktop

Hello all Check out the Dv-Mega Gone Portable video series. Part 1 http://youtu.be/k0QhnausIAg http://youtu.be/k0QhnausIAg Part 2 http://youtu.be/ovIp_L6kWU0

Yep I did join the group last night thanks 73's David VK4UN From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] Sent: Sunday, 24 August

Hello David, Something like that is usually a port problem. The troubleshoot script is pretty good at finding things like that. Glad that helped you get it going. Still may want to join the PiRLP