Re: AC Log to LOTW error?
The date range for QSOs is set by you when you requested the first certificate and has no relationship to the issue date or expiration date of the certificate itself. It would seem that the fix should be to simply renew your certificate using a start date older than the first QSO ever with that callsign. 73 -Jim NU0C On Tue, 04 Jul 2023 19:21:47 +0000 "Frank Mellott" <frankmellott@...> wrote: Good afternoon
This is not an AC Log error. It is either the operator or something in
the LOTw configurations for TQSL.
When you joined LOTW, you got a certifcate. Mine was from when I was
first licensed, until I joined LOTW, so say a 7 or 8 year span. When
that certificate expired, I got a new one. I forget if it was valid
from the expiration date of the old one, or from the renewal date. It
was good for I think 3 years. I have renewed a couple of times. Once,
I had not uploaded a QSO from the time frame on the old certificate. It
shows the same error and I cannot upload to LoTW.
For example, lets say the QSO was made June 25, the certificate expired
June 30 and the new one starts July 1. Since I didn't upload after June
25 on the old certificate, the new one says it is outside the date
range.
If there is a solution other than ignoring it, I do not know, and I will
not contact ARRL for support. Been down that road and not willing to
take it again.
Hope this helps.
73
Frank
KB3PQT
--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
|
Re: WSJT-X not logging into ACL
Thanks all. I missed the one port setting in the WSJT-X API interface.
All working well now.
Happy 4th!
--
73.
BOB -- K6RWM
|
Re: AC Log to LOTW error?
Good afternoon
This is not an AC Log error.? It is either the operator or something in the LOTw configurations for TQSL.
When you joined LOTW, you got a certifcate.? Mine was from when I was first licensed, until I joined LOTW, so say a 7 or 8 year span.? ?When that certificate expired, I got a new one.? I forget if it was valid from the expiration date of the old one, or from the renewal date.? It was good for I think 3 years.? I have renewed a couple of times.? Once, I had not uploaded a QSO from the time frame on the old certificate.? It shows the same error and I cannot upload to LoTW. For example,? lets say the QSO was made June 25, the certificate expired June 30 and the new one starts July 1.? Since I didn't upload after June 25 on the old certificate, the new one says it is outside the date range.
If there is a solution other than ignoring it, I do not know, and I will not contact ARRL for support.? Been down that road and not willing to take it again.
Hope this helps. 73 Frank KB3PQT
|
Re: Rescore Field Day Log
Hi Bob,
Thanks for your follow up.? It shouldn't matter, but since you are only accessing the file with your one PC now, go ahead and switch back to File Share.? If you still have trouble, please go ahead and e-mail me your log in ADIF direct (not via the e-mail group) and I will see if I can duplicate what you are experiencing here.
73,?Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 4, 2023 at 02:37:56 PM EDT, Bob AF9W <af9w@...> wrote:
I am using the actual file we used at Field Day on the computer we used at Field Day as the primary server.? We did use TCP/IP instead of File Sharing as File Sharing didn't work well and TCP/IP worked flawlessly.? We had a combination of Windows 10 and Windows 11 computers and File Sharing is a PITA.??
|
Re: Rescore Field Day Log
I am using the actual file we used at Field Day on the computer we used at Field Day as the primary server.? We did use TCP/IP instead of File Sharing as File Sharing didn't work well and TCP/IP worked flawlessly.? We had a combination of Windows 10 and Windows 11 computers and File Sharing is a PITA.??
|
Re: Rescore Field Day Log
Hi Bob,
Thanks for your follow up.? Your edits are not being accepted at all.? I've not ever seen that before.? How did you load the Field Day log???
The only thing I can think to be the problem is that your protection software isn't allowing the Field Day software to save the edited file.? If they sent you an ADIF file, you should have been able to start a new, editable file in the Field Day software and then import the log and edit it as needed.??
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 4, 2023 at 01:52:39 PM EDT, Bob AF9W <af9w@...> wrote:
On Tue, Jul 4, 2023 at 09:40 AM, Scott Davis wrote:
Thanks for your follow up.? I'm sorry, I gave you an incomplete answer.? For your score to update, you need to edit the Mode(tst) field as in my previous reply.? For the list to update, you will need to edit the Mode field as well.? I've double checked and the score updates properly when editing the Mode(tst) field.
Scott, I tried editing both modes fields and the log view and score still do not update even though when I right click on the updated QSO, the editing dialog shows the new mode.? Here is a link to a shaky video showing what I mean. I did not include the right click in the video but can show you if needed.??
|
Re: Rescore Field Day Log
On Tue, Jul 4, 2023 at 09:40 AM, Scott Davis wrote:
Thanks for your follow up.? I'm sorry, I gave you an incomplete answer.? For your score to update, you need to edit the Mode(tst) field as in my previous reply.? For the list to update, you will need to edit the Mode field as well.? I've double checked and the score updates properly when editing the Mode(tst) field.
Scott, I tried editing both modes fields and the log view and score still do not update even though when I right click on the updated QSO, the editing dialog shows the new mode.? Here is a link to a shaky video showing what I mean. I did not include the right click in the video but can show you if needed.??
|
Hi Ken,
Thanks for your e-mail.? The only reason I can think of is that you inserted a QSO with an earlier date than the 13 Colonies window.? Clicking File > Sort log on date will remedy that.
I hope this helps!
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 4, 2023 at 12:31:29 PM EDT, Justin Lentz KF5IVJ <kf5ivj@...> wrote:
All the ones I have made contact with since the start show in blue?
As another data point, mine are still all blue and I completed my sweep within the first 29 hours.
As a side note, it is good practice to always listen to the operator's routine for a short time before jumping into the pile.
73
-Jim
NU0C
On Tue, 04 Jul 2023 08:50:27 -0700
"Ken Bell" <k4ees@...> wrote:
> Hi
>
> The 13 Colonies is a very nice feature in ACLog.?? Easy way to click and find the colonies you are looking for.
>
> A minor bug seems to be that it will only show the contacts you have made today, and not the contacts that you have made in this year's contest. Yesterday I made 12 of the 13 colonies and the TM extra.? This morning when I started it up, only the colony that
I caught after midnight shows in blue. I grabbed my last colony and it now it shows the two colonies only in blue.? When I close the window, the very nice report does show all of the colony contacts that I have made this year.? Is this intended, or should
it be showing all of the contacted colonies for this year in blue?? I did download again the Countries and restarted ACLog with the same results.
>
> One quick recommendation for folks using this....?? I was trying to get the last 3 colonies, and would click on the Green (uncontacted) colony and try for a bit and if unsuccessful, just click on the next colony I was looking for.? I got my butt chewed by
the colony operator of K2C.? I clicked in on Green K2C in the ACLog window and hit him with my call when he called "CQ K2C Colonies".? He relied "K4EES, is? a 6 callsign?"? I think he wanted to add "jerk" at the end.?? I told him no and asked if he was playing
the 'Numbers game'.? He said he was and, of course, I apologized.? But, he didn't say he was calling for 6's on that exchange....? the only one I had heard.
>
> Anyway, thanks Scott for the 13-Colonies feature.? It's made the 'contest' easy to work.
> --
> Ken - K4EES
>
>
>
>
>
|
Re: AC Log to LOTW error?
Have you checked the dates on your signing certificates in TWSL?
You can display the dates by viewing the properties.
if the QSO was before your earliest date on the certificate then TQSL will not sign it.
--
Jason Johnson
K3JSJ
|
Re: AC Log to LOTW error?
Hi Maury,
Thanks for your e-mail.? That error is being returned from ARRL's TQSL software, not AC Log.? If the QSO date is within the certificate range date, that is something the folks at LoTW will need to help you with.? Otherwise, you will need to update your certificate.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 4, 2023 at 11:41:22 AM EDT, W5IO <w5io@...> wrote:
It seems that some old QSO's never made it into LOTW from ACLog. I keep getting an error message that the QSO is not withing Callsign Certificate date range. But it is and I can't figure out how to resolve this.
Anyone know the solution?
If IO Groups allows it, I have attached screen shots of the error message and the call sign cert.
Thanks
73
Maury W5IO
|
Re: Rescore Field Day Log
Hi Bob,
Thanks for your follow up.? I'm sorry, I gave you an incomplete answer.? For your score to update, you need to edit the Mode(tst) field as in my previous reply.? For the list to update, you will need to edit the Mode field as well.? I've double checked and the score updates properly when editing the Mode(tst) field.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 4, 2023 at 11:26:49 AM EDT, Bob AF9W <af9w@...> wrote:
We discovered the error after Field Day.? I started the Field Day program on our primary logging software at home and opened our Field Day log.? It lets me edit the QSO's that are in error and change the mode to PH.? When I click Done on the edit screen, the mode in the log view does not change and the score does not update.? I have changed the mode on three QSOs and if I go back into edit on those QSOs the mode shows the new mode on the edit dialog box but when I click Done, it still does not show updated in the logview nor does the score change.? The QSOs where originally entered by some new operators who forgot to change the mode in the software and was allowing WSJT-X to control the radio instead of the Field Day software.??
|
All the ones I have made contact with since the start show in blue?
toggle quoted message
Show quoted text
As another data point, mine are still all blue and I completed my sweep within the first 29 hours.
As a side note, it is good practice to always listen to the operator's routine for a short time before jumping into the pile.
73
-Jim
NU0C
On Tue, 04 Jul 2023 08:50:27 -0700
"Ken Bell" <k4ees@...> wrote:
> Hi
>
> The 13 Colonies is a very nice feature in ACLog.?? Easy way to click and find the colonies you are looking for.
>
> A minor bug seems to be that it will only show the contacts you have made today, and not the contacts that you have made in this year's contest. Yesterday I made 12 of the 13 colonies and the TM extra.? This morning when I started it up, only the colony that
I caught after midnight shows in blue. I grabbed my last colony and it now it shows the two colonies only in blue.? When I close the window, the very nice report does show all of the colony contacts that I have made this year.? Is this intended, or should
it be showing all of the contacted colonies for this year in blue?? I did download again the Countries and restarted ACLog with the same results.
>
> One quick recommendation for folks using this....?? I was trying to get the last 3 colonies, and would click on the Green (uncontacted) colony and try for a bit and if unsuccessful, just click on the next colony I was looking for.? I got my butt chewed by
the colony operator of K2C.? I clicked in on Green K2C in the ACLog window and hit him with my call when he called "CQ K2C Colonies".? He relied "K4EES, is? a 6 callsign?"? I think he wanted to add "jerk" at the end.?? I told him no and asked if he was playing
the 'Numbers game'.? He said he was and, of course, I apologized.? But, he didn't say he was calling for 6's on that exchange....? the only one I had heard.
>
> Anyway, thanks Scott for the 13-Colonies feature.? It's made the 'contest' easy to work.
> --
> Ken - K4EES
>
>
>
>
>
|
As another data point, mine are still all blue and I completed my sweep within the first 29 hours. As a side note, it is good practice to always listen to the operator's routine for a short time before jumping into the pile. 73 -Jim NU0C On Tue, 04 Jul 2023 08:50:27 -0700 "Ken Bell" <k4ees@...> wrote: Hi
The 13 Colonies is a very nice feature in ACLog.?? Easy way to click and find the colonies you are looking for.
A minor bug seems to be that it will only show the contacts you have made today, and not the contacts that you have made in this year's contest. Yesterday I made 12 of the 13 colonies and the TM extra.? This morning when I started it up, only the colony that I caught after midnight shows in blue. I grabbed my last colony and it now it shows the two colonies only in blue.? When I close the window, the very nice report does show all of the colony contacts that I have made this year.? Is this intended, or should it be showing all of the contacted colonies for this year in blue?? I did download again the Countries and restarted ACLog with the same results.
One quick recommendation for folks using this....?? I was trying to get the last 3 colonies, and would click on the Green (uncontacted) colony and try for a bit and if unsuccessful, just click on the next colony I was looking for.? I got my butt chewed by the colony operator of K2C.? I clicked in on Green K2C in the ACLog window and hit him with my call when he called "CQ K2C Colonies".? He relied "K4EES, is? a 6 callsign?"? I think he wanted to add "jerk" at the end.?? I told him no and asked if he was playing the 'Numbers game'.? He said he was and, of course, I apologized.? But, he didn't say he was calling for 6's on that exchange....? the only one I had heard.
Anyway, thanks Scott for the 13-Colonies feature.? It's made the 'contest' easy to work.
--
Ken - K4EES
|
Not a problem with 13 colonies, even shows last years contacts in
a different color.
I see no issues using it,
Tim w4yn
On 7/4/2023 11:58 AM, Dave wo2x wrote:
toggle quoted message
Show quoted text
Some operators have short fuses. This should be a fun, spirited
event, especially with the turmoil in the country today.?
Dave wo2x
Sent from my waxed string and tin cans.?
On Jul 4, 2023, at 11:50 AM, Ken Bell
<k4ees@...> wrote:
?
Hi
The 13 Colonies is a very nice feature in ACLog.?? Easy
way to click and find the colonies you are looking for.?
A minor bug seems to be that it will only show the
contacts you have made today, and not the contacts that
you have made in this year's contest. Yesterday I made 12
of the 13 colonies and the TM extra.? This morning when I
started it up, only the colony that I caught after
midnight shows in blue. I grabbed my last colony and it
now it shows the two colonies only in blue.? When I close
the window, the very nice report does show all of the
colony contacts that I have made this year.? Is this
intended, or should it be showing all of the contacted
colonies for this year in blue?? I did download again the
Countries and restarted ACLog with the same results. ?
One quick recommendation for folks using this....?? I was
trying to get the last 3 colonies, and would click on the
Green (uncontacted) colony and try for a bit and if
unsuccessful, just click on the next colony I was looking
for.? I got my butt chewed by the colony operator of K2C.?
I clicked in on Green K2C in the ACLog window and hit him
with my call when he called "CQ K2C Colonies".? He relied
"K4EES, is? a 6 callsign?"? I think he wanted to add
"jerk" at the end.?? I told him no and asked if he was
playing the 'Numbers game'.? He said he was and, of
course, I apologized.? But, he didn't say he was calling
for 6's on that exchange....? the only one I had heard. ?
Anyway, thanks Scott for the 13-Colonies feature.? It's
made the 'contest' easy to work.
--
Ken - K4EES
|
Same here.
Steve, AI3KS
On 23/07/04 12:08, Fred K2DFC via
groups.io wrote:
toggle quoted message
Show quoted text
My 13 Colony list are still all showing blue. All since the ones from July 1st. Works fine here.
|
My 13 Colony list are still all showing blue. All since the ones from July 1st. Works fine here.
--
73
Fred
K2DFC
|
Some operators have short fuses. This should be a fun, spirited event, especially with the turmoil in the country today.?
Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jul 4, 2023, at 11:50 AM, Ken Bell <k4ees@...> wrote:
? Hi
The 13 Colonies is a very nice feature in ACLog.?? Easy way to click and find the colonies you are looking for.?
A minor bug seems to be that it will only show the contacts you have made today, and not the contacts that you have made in this year's contest. Yesterday I made 12 of the 13 colonies and the TM extra.? This morning when I started it up, only the colony that I caught after midnight shows in blue. I grabbed my last colony and it now it shows the two colonies only in blue.? When I close the window, the very nice report does show all of the colony contacts that I have made this year.? Is this intended, or should it be showing all of the contacted colonies for this year in blue?? I did download again the Countries and restarted ACLog with the same results. ?
One quick recommendation for folks using this....?? I was trying to get the last 3 colonies, and would click on the Green (uncontacted) colony and try for a bit and if unsuccessful, just click on the next colony I was looking for.? I got my butt chewed by the colony operator of K2C.? I clicked in on Green K2C in the ACLog window and hit him with my call when he called "CQ K2C Colonies".? He relied "K4EES, is? a 6 callsign?"? I think he wanted to add "jerk" at the end.?? I told him no and asked if he was playing the 'Numbers game'.? He said he was and, of course, I apologized.? But, he didn't say he was calling for 6's on that exchange....? the only one I had heard. ?
Anyway, thanks Scott for the 13-Colonies feature.? It's made the 'contest' easy to work.
--
Ken - K4EES
|
Hi
The 13 Colonies is a very nice feature in ACLog.?? Easy way to click and find the colonies you are looking for.?
A minor bug seems to be that it will only show the contacts you have made today, and not the contacts that you have made in this year's contest. Yesterday I made 12 of the 13 colonies and the TM extra.? This morning when I started it up, only the colony that I caught after midnight shows in blue. I grabbed my last colony and it now it shows the two colonies only in blue.? When I close the window, the very nice report does show all of the colony contacts that I have made this year.? Is this intended, or should it be showing all of the contacted colonies for this year in blue?? I did download again the Countries and restarted ACLog with the same results. ?
One quick recommendation for folks using this....?? I was trying to get the last 3 colonies, and would click on the Green (uncontacted) colony and try for a bit and if unsuccessful, just click on the next colony I was looking for.? I got my butt chewed by the colony operator of K2C.? I clicked in on Green K2C in the ACLog window and hit him with my call when he called "CQ K2C Colonies".? He relied "K4EES, is? a 6 callsign?"? I think he wanted to add "jerk" at the end.?? I told him no and asked if he was playing the 'Numbers game'.? He said he was and, of course, I apologized.? But, he didn't say he was calling for 6's on that exchange....? the only one I had heard. ?
Anyway, thanks Scott for the 13-Colonies feature.? It's made the 'contest' easy to work.
--
Ken - K4EES
|
It seems that some old QSO's never made it into LOTW from ACLog. I keep getting an error message that the QSO is not withing Callsign Certificate date range. But it is and I can't figure out how to resolve this.
Anyone know the solution?
If IO Groups allows it, I have attached screen shots of the error message and the call sign cert.
Thanks
73
Maury W5IO
|
Re: Rescore Field Day Log
We discovered the error after Field Day.? I started the Field Day program on our primary logging software at home and opened our Field Day log.? It lets me edit the QSO's that are in error and change the mode to PH.? When I click Done on the edit screen, the mode in the log view does not change and the score does not update.? I have changed the mode on three QSOs and if I go back into edit on those QSOs the mode shows the new mode on the edit dialog box but when I click Done, it still does not show updated in the logview nor does the score change.? The QSOs where originally entered by some new operators who forgot to change the mode in the software and was allowing WSJT-X to control the radio instead of the Field Day software.??
|
Jim Shorney
Bob AF9W
Dave wo2x
Ken Bell