Is there a fix for the ‘worked’ indicator in WSJT?
When I monitor and see a 13C station, WSJT marks it as worked because ACL knows that I worked it last year.?
So can ACL be limited to only searching this year for ‘worked’ stations?
I can monitor the worked this year with the ACL report but monitoring WSJT is difficult….
|
Scott
You hit on it.? ?I had imported a POTA activation adi from a few days ago that I had recorded in another program.? ?Sorting on date brought back all of the blue, worked colonies.? Do note that the report generated after closing the 13-Colonies view did show all of the worked colonies.
Best 73,??
--
Ken - K4EES
|
Re: Trying to Load ACL onto Windows 7 laptop - getting DavidLibrary.MainWorker error
Hi Anne,
Thanks for your e-mail.? I'm sorry that you have run into trouble.? Installing all the Windows 7 OS updates should remedy that.? Alternatively, you should be able to install this version here:
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 4, 2023 at 09:59:05 PM EDT, Anne KC9YL 3070 <kc9yl.anne@...> wrote:
along with this:
Message: The type initializer for 'DavisLibrary.MainWorker' threw an exception.
Source: ACLog
StackTrace: ? ?at DavisLibrary.MainWorker.OnStart() in E:\C#-CI\N3FJP Software\aclog\MainWorker.cs:line 136
? ?at DavisLibrary.Form1..ctor() in E:\C#-CI\N3FJP Software\aclog\Form1.cs:line 871
TargetSite: Void OnStart()
Message: Could not load type 'System.Runtime.CompilerServices.ExtensionAttribute' from assembly 'mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Source: mscorlib
StackTrace: ? ?at System.ModuleHandle.ResolveMethod(RuntimeModule module, Int32 methodToken, IntPtr* typeInstArgs, Int32 typeInstCount, IntPtr* methodInstArgs, Int32 methodInstCount)
? ?at System.ModuleHandle.ResolveMethodHandleInternalCore(RuntimeModule module, Int32 methodToken, IntPtr[] typeInstantiationContext, Int32 typeInstCount, IntPtr[] methodInstantiationContext, Int32 methodInstCount)
? ?at System.ModuleHandle.ResolveMethodHandleInternal(RuntimeModule module, Int32 methodToken, RuntimeTypeHandle[] typeInstantiationContext, RuntimeTypeHandle[] methodInstantiationContext)
? ?at System.Reflection.CustomAttributeData..ctor(RuntimeModule scope, CustomAttributeRecord caRecord)
? ?at System.Reflection.CustomAttributeData.GetCustomAttributes(RuntimeModule module, Int32 tkTarget)
? ?at System.Reflection.CustomAttributeData.GetCustomAttributesInternal(RuntimeAssembly target)
? ?at System.Reflection.RuntimeAssembly.GetCustomAttributesData()
? ?at System.Reflection.CustomAttributeData.GetCustomAttributes(Assembly target)
? ?at System.Resources.ManifestBasedResourceGroveler.GetNeutralResourcesLanguage(Assembly a, UltimateResourceFallbackLocation& fallbackLocation)
? ?at System.Resources.ResourceManager.CommonSatelliteAssemblyInit()
? ?at System.Resources.ResourceManager..ctor(Type resourceSource)
? ?at System.ComponentModel.ComponentResourceManager..ctor(Type t)
? ?at DavisLibrary.frmDXSpotting.InitializeComponent() in E:\C#-CI\N3FJP Software\N3FJP_Shared\frmDXSpotting.designer.cs:line 32
? ?at DavisLibrary.frmDXSpotting..ctor(TelnetWorker telnetWorker, clsTelnet cTelnet) in E:\C#-CI\N3FJP Software\N3FJP_Shared\frmDXSpotting.cs:line 27
? ?at DavisLibrary.TelnetWorker..ctor() in E:\C#-CI\N3FJP Software\N3FJP_Shared\TelnetWorker.cs:line 19
? ?at DavisLibrary.MainWorker..cctor() in E:\C#-CI\N3FJP Software\aclog\MainWorker.cs:line 51
TargetSite: System.RuntimeMethodHandleInternal ResolveMethod(System.Reflection.RuntimeModule, Int32, IntPtr*, Int32, IntPtr*, Int32)?
|
Trying to Load ACL onto Windows 7 laptop - getting DavidLibrary.MainWorker error
along with this:
Message: The type initializer for 'DavisLibrary.MainWorker' threw an exception.
Source: ACLog
StackTrace: ? ?at DavisLibrary.MainWorker.OnStart() in E:\C#-CI\N3FJP Software\aclog\MainWorker.cs:line 136
? ?at DavisLibrary.Form1..ctor() in E:\C#-CI\N3FJP Software\aclog\Form1.cs:line 871
TargetSite: Void OnStart()
Message: Could not load type 'System.Runtime.CompilerServices.ExtensionAttribute' from assembly 'mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Source: mscorlib
StackTrace: ? ?at System.ModuleHandle.ResolveMethod(RuntimeModule module, Int32 methodToken, IntPtr* typeInstArgs, Int32 typeInstCount, IntPtr* methodInstArgs, Int32 methodInstCount)
? ?at System.ModuleHandle.ResolveMethodHandleInternalCore(RuntimeModule module, Int32 methodToken, IntPtr[] typeInstantiationContext, Int32 typeInstCount, IntPtr[] methodInstantiationContext, Int32 methodInstCount)
? ?at System.ModuleHandle.ResolveMethodHandleInternal(RuntimeModule module, Int32 methodToken, RuntimeTypeHandle[] typeInstantiationContext, RuntimeTypeHandle[] methodInstantiationContext)
? ?at System.Reflection.CustomAttributeData..ctor(RuntimeModule scope, CustomAttributeRecord caRecord)
? ?at System.Reflection.CustomAttributeData.GetCustomAttributes(RuntimeModule module, Int32 tkTarget)
? ?at System.Reflection.CustomAttributeData.GetCustomAttributesInternal(RuntimeAssembly target)
? ?at System.Reflection.RuntimeAssembly.GetCustomAttributesData()
? ?at System.Reflection.CustomAttributeData.GetCustomAttributes(Assembly target)
? ?at System.Resources.ManifestBasedResourceGroveler.GetNeutralResourcesLanguage(Assembly a, UltimateResourceFallbackLocation& fallbackLocation)
? ?at System.Resources.ResourceManager.CommonSatelliteAssemblyInit()
? ?at System.Resources.ResourceManager..ctor(Type resourceSource)
? ?at System.ComponentModel.ComponentResourceManager..ctor(Type t)
? ?at DavisLibrary.frmDXSpotting.InitializeComponent() in E:\C#-CI\N3FJP Software\N3FJP_Shared\frmDXSpotting.designer.cs:line 32
? ?at DavisLibrary.frmDXSpotting..ctor(TelnetWorker telnetWorker, clsTelnet cTelnet) in E:\C#-CI\N3FJP Software\N3FJP_Shared\frmDXSpotting.cs:line 27
? ?at DavisLibrary.TelnetWorker..ctor() in E:\C#-CI\N3FJP Software\N3FJP_Shared\TelnetWorker.cs:line 19
? ?at DavisLibrary.MainWorker..cctor() in E:\C#-CI\N3FJP Software\aclog\MainWorker.cs:line 51
TargetSite: System.RuntimeMethodHandleInternal ResolveMethod(System.Reflection.RuntimeModule, Int32, IntPtr*, Int32, IntPtr*, Int32)?
|
Re: AC Log to LOTW error?
When getting your TQSL certificate you can leave the end date blank unless you have changed calls from that call to another within the certificate timeframe.?
Dave wo2x? Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jul 4, 2023, at 8:28 PM, Don W7WLL <w7wll@...> wrote:
?
I use the QSO Start Date as the date I first
received my license.? As I recall the QSO End Date had to be
within the Certificate Expires date.? I've had zero issues as I
plug in log books going back to really old times when toobs were
in vogue.
Don W7WLL
<B6xJ7Gq9jANKOVM4.png>
On 7/4/2023 12:21 PM, Frank Mellott
wrote:
Good afternoon
This is not an AC Log error.? It is either the operator or
something in the LOTw configurations for TQSL.
When you joined LOTW, you got a certifcate.? Mine was from
when I was first licensed, until I joined LOTW, so say a 7 or 8
year span.? ?When that certificate expired, I got a new one.? I
forget if it was valid from the expiration date of the old one,
or from the renewal date.? It was good for I think 3 years.? I
have renewed a couple of times.? Once, I had not uploaded a QSO
from the time frame on the old certificate.? It shows the same
error and I cannot upload to LoTW.
For example,? lets say the QSO was made June 25, the
certificate expired June 30 and the new one starts July 1.?
Since I didn't upload after June 25 on the old certificate, the
new one says it is outside the date range.
If there is a solution other than ignoring it, I do not know,
and I will not contact ARRL for support.? Been down that road
and not willing to take it again.
Hope this helps.
73
Frank
KB3PQT
|
Spot last on main page. Work them, spot them. If you want to add a comment, just right click Spot Last.?
73 Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jul 4, 2023, at 8:24 PM, Kevin Gray <n9vpv@...> wrote:
? What method are you using to spot the DX ?? Are you doing it from the DX Spot (CTRL-D) form or from the “Spot Last” button on the main form ?? If doing it from the (CTRL-D) form, you just add your comment to the text at the bottom, if from the “Spot Last” button on the main form, try right clicking it. (Hover your mouse over the button for instructions. ? <image003.jpg> ? ? Kevin N9VPV -. ----. …- .--. …- ? ? ? ?
I’m using the Data Source Telnet Host “dxspots.com” cluster within N3FJP and can’t figure out how to add “comments” to a spot.
Example:I
DX de WX6G 14.007 TM13COL ?Listening UP 1.5
(in this example the comment would be “?Listening UP 1.5 “ )
I’ve entered the HELP command and went to the website to get all cluster commands, but?nothing looks like a command that allows comments to be input.?
Any help would be appreciated. ?
John - WX6G
|
Re: AC Log to LOTW error?
I use the QSO Start Date as the date I first
received my license.? As I recall the QSO End Date had to be
within the Certificate Expires date.? I've had zero issues as I
plug in log books going back to really old times when toobs were
in vogue.
Don W7WLL
On 7/4/2023 12:21 PM, Frank Mellott
wrote:
toggle quoted message
Show quoted text
Good afternoon
This is not an AC Log error.? It is either the operator or
something in the LOTw configurations for TQSL.
When you joined LOTW, you got a certifcate.? Mine was from
when I was first licensed, until I joined LOTW, so say a 7 or 8
year span.? ?When that certificate expired, I got a new one.? I
forget if it was valid from the expiration date of the old one,
or from the renewal date.? It was good for I think 3 years.? I
have renewed a couple of times.? Once, I had not uploaded a QSO
from the time frame on the old certificate.? It shows the same
error and I cannot upload to LoTW.
For example,? lets say the QSO was made June 25, the
certificate expired June 30 and the new one starts July 1.?
Since I didn't upload after June 25 on the old certificate, the
new one says it is outside the date range.
If there is a solution other than ignoring it, I do not know,
and I will not contact ARRL for support.? Been down that road
and not willing to take it again.
Hope this helps.
73
Frank
KB3PQT
|
What method are you using to spot the DX ?? Are you doing it from the DX Spot (CTRL-D) form or from the “Spot Last” button on the main form ?? If doing it from the (CTRL-D) form, you just add your comment to the text at the bottom, if from the “Spot Last” button on the main form, try right clicking it. (Hover your mouse over the button for instructions. ? 
? ? Kevin N9VPV -. ----. …- .--. …- ? ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of WX6G Sent: Tuesday, July 4, 2023 6:34 PM To: [email protected]Subject: [N3FJPSoftwareUsers] DX Spots Comments ?
I’m using the Data Source Telnet Host “dxspots.com” cluster within N3FJP and can’t figure out how to add “comments” to a spot.
Example:I
DX de WX6G 14.007 TM13COL ?Listening UP 1.5
(in this example the comment would be “?Listening UP 1.5 “ )
I’ve entered the HELP command and went to the website to get all cluster commands, but?nothing looks like a command that allows comments to be input.?
Any help would be appreciated. ?
John - WX6G
|
Right click the Spot Last and a pop up allows entering comments.?
73 Dave wo2x Sent from my waxed string and tin cans.?
toggle quoted message
Show quoted text
On Jul 4, 2023, at 7:33 PM, WX6G <jtma67@...> wrote:
?
I’m using the Data Source Telnet Host “dxspots.com” cluster within N3FJP and can’t figure out how to add “comments” to a spot.
Example:I
DX de WX6G 14.007 TM13COL ?Listening UP 1.5
(in this example the comment would be “?Listening UP 1.5 “ )
I’ve entered the HELP command and went to the website to get all cluster commands, but?nothing looks like a command that allows comments to be input.?
Any help would be appreciated. ?
John - WX6G
|
I’m using the Data Source Telnet Host “dxspots.com” cluster within N3FJP and can’t figure out how to add “comments” to a spot.
Example:I
DX de WX6G 14.007 TM13COL ?Listening UP 1.5
(in this example the comment would be “?Listening UP 1.5 “ )
I’ve entered the HELP command and went to the website to get all cluster commands, but?nothing looks like a command that allows comments to be input.?
Any help would be appreciated. ?
John - WX6G
|
Re: AC Log to LOTW error?
Are you doing the upload as station WA5WEX??
Bob N3FM?
On Tue, Jul 4, 2023, 4:17 PM Jim Shorney < jimNU0C@...> wrote:
The date range for QSOs is set by you when you requested the first certificate and has no relationship to the issue date or expiration date of the certificate itself. It would seem that the fix should be to simply renew your certificate using a start date older than the first QSO ever with that callsign.
73
-Jim
NU0C
On Tue, 04 Jul 2023 19:21:47 +0000
"Frank Mellott" <frankmellott@...> wrote:
> Good afternoon
>
> This is not an AC Log error.? It is either the operator or something in
> the LOTw configurations for TQSL.
>
> When you joined LOTW, you got a certifcate.? Mine was from when I was
> first licensed, until I joined LOTW, so say a 7 or 8 year span.? ?When
> that certificate expired, I got a new one.? I forget if it was valid
> from the expiration date of the old one, or from the renewal date.? It
> was good for I think 3 years.? I have renewed a couple of times.? Once,
> I had not uploaded a QSO from the time frame on the old certificate.? It
> shows the same error and I cannot upload to LoTW.
> For example,? lets say the QSO was made June 25, the certificate expired
> June 30 and the new one starts July 1.? Since I didn't upload after June
> 25 on the old certificate, the new one says it is outside the date
> range.
>
> If there is a solution other than ignoring it, I do not know, and I will
> not contact ARRL for support.? Been down that road and not willing to
> take it again.
>
> Hope this helps.
> 73
> Frank
> KB3PQT
>
>
>
>
>
>
>
> --
> This email has been checked for viruses by AVG antivirus software.
>
>
>
>
>
>
|
Re: AC Log to LOTW error?
The date range for QSOs is set by you when you requested the first certificate and has no relationship to the issue date or expiration date of the certificate itself. It would seem that the fix should be to simply renew your certificate using a start date older than the first QSO ever with that callsign. 73 -Jim NU0C On Tue, 04 Jul 2023 19:21:47 +0000 "Frank Mellott" <frankmellott@...> wrote: Good afternoon
This is not an AC Log error. It is either the operator or something in
the LOTw configurations for TQSL.
When you joined LOTW, you got a certifcate. Mine was from when I was
first licensed, until I joined LOTW, so say a 7 or 8 year span. When
that certificate expired, I got a new one. I forget if it was valid
from the expiration date of the old one, or from the renewal date. It
was good for I think 3 years. I have renewed a couple of times. Once,
I had not uploaded a QSO from the time frame on the old certificate. It
shows the same error and I cannot upload to LoTW.
For example, lets say the QSO was made June 25, the certificate expired
June 30 and the new one starts July 1. Since I didn't upload after June
25 on the old certificate, the new one says it is outside the date
range.
If there is a solution other than ignoring it, I do not know, and I will
not contact ARRL for support. Been down that road and not willing to
take it again.
Hope this helps.
73
Frank
KB3PQT
--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
|
Re: WSJT-X not logging into ACL
Thanks all. I missed the one port setting in the WSJT-X API interface.
All working well now.
Happy 4th!
--
73.
BOB -- K6RWM
|
Re: AC Log to LOTW error?
Good afternoon
This is not an AC Log error.? It is either the operator or something in the LOTw configurations for TQSL.
When you joined LOTW, you got a certifcate.? Mine was from when I was first licensed, until I joined LOTW, so say a 7 or 8 year span.? ?When that certificate expired, I got a new one.? I forget if it was valid from the expiration date of the old one, or from the renewal date.? It was good for I think 3 years.? I have renewed a couple of times.? Once, I had not uploaded a QSO from the time frame on the old certificate.? It shows the same error and I cannot upload to LoTW. For example,? lets say the QSO was made June 25, the certificate expired June 30 and the new one starts July 1.? Since I didn't upload after June 25 on the old certificate, the new one says it is outside the date range.
If there is a solution other than ignoring it, I do not know, and I will not contact ARRL for support.? Been down that road and not willing to take it again.
Hope this helps. 73 Frank KB3PQT
|
Re: Rescore Field Day Log
Hi Bob,
Thanks for your follow up.? It shouldn't matter, but since you are only accessing the file with your one PC now, go ahead and switch back to File Share.? If you still have trouble, please go ahead and e-mail me your log in ADIF direct (not via the e-mail group) and I will see if I can duplicate what you are experiencing here.
73,?Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 4, 2023 at 02:37:56 PM EDT, Bob AF9W <af9w@...> wrote:
I am using the actual file we used at Field Day on the computer we used at Field Day as the primary server.? We did use TCP/IP instead of File Sharing as File Sharing didn't work well and TCP/IP worked flawlessly.? We had a combination of Windows 10 and Windows 11 computers and File Sharing is a PITA.??
|
Re: Rescore Field Day Log
I am using the actual file we used at Field Day on the computer we used at Field Day as the primary server.? We did use TCP/IP instead of File Sharing as File Sharing didn't work well and TCP/IP worked flawlessly.? We had a combination of Windows 10 and Windows 11 computers and File Sharing is a PITA.??
|
Re: Rescore Field Day Log
Hi Bob,
Thanks for your follow up.? Your edits are not being accepted at all.? I've not ever seen that before.? How did you load the Field Day log???
The only thing I can think to be the problem is that your protection software isn't allowing the Field Day software to save the edited file.? If they sent you an ADIF file, you should have been able to start a new, editable file in the Field Day software and then import the log and edit it as needed.??
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 4, 2023 at 01:52:39 PM EDT, Bob AF9W <af9w@...> wrote:
On Tue, Jul 4, 2023 at 09:40 AM, Scott Davis wrote:
Thanks for your follow up.? I'm sorry, I gave you an incomplete answer.? For your score to update, you need to edit the Mode(tst) field as in my previous reply.? For the list to update, you will need to edit the Mode field as well.? I've double checked and the score updates properly when editing the Mode(tst) field.
Scott, I tried editing both modes fields and the log view and score still do not update even though when I right click on the updated QSO, the editing dialog shows the new mode.? Here is a link to a shaky video showing what I mean. I did not include the right click in the video but can show you if needed.??
|
Re: Rescore Field Day Log
On Tue, Jul 4, 2023 at 09:40 AM, Scott Davis wrote:
Thanks for your follow up.? I'm sorry, I gave you an incomplete answer.? For your score to update, you need to edit the Mode(tst) field as in my previous reply.? For the list to update, you will need to edit the Mode field as well.? I've double checked and the score updates properly when editing the Mode(tst) field.
Scott, I tried editing both modes fields and the log view and score still do not update even though when I right click on the updated QSO, the editing dialog shows the new mode.? Here is a link to a shaky video showing what I mean. I did not include the right click in the video but can show you if needed.??
|
Hi Ken,
Thanks for your e-mail.? The only reason I can think of is that you inserted a QSO with an earlier date than the 13 Colonies window.? Clicking File > Sort log on date will remedy that.
I hope this helps!
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 4, 2023 at 12:31:29 PM EDT, Justin Lentz KF5IVJ <kf5ivj@...> wrote:
All the ones I have made contact with since the start show in blue?
As another data point, mine are still all blue and I completed my sweep within the first 29 hours.
As a side note, it is good practice to always listen to the operator's routine for a short time before jumping into the pile.
73
-Jim
NU0C
On Tue, 04 Jul 2023 08:50:27 -0700
"Ken Bell" <k4ees@...> wrote:
> Hi
>
> The 13 Colonies is a very nice feature in ACLog.?? Easy way to click and find the colonies you are looking for.
>
> A minor bug seems to be that it will only show the contacts you have made today, and not the contacts that you have made in this year's contest. Yesterday I made 12 of the 13 colonies and the TM extra.? This morning when I started it up, only the colony that
I caught after midnight shows in blue. I grabbed my last colony and it now it shows the two colonies only in blue.? When I close the window, the very nice report does show all of the colony contacts that I have made this year.? Is this intended, or should
it be showing all of the contacted colonies for this year in blue?? I did download again the Countries and restarted ACLog with the same results.
>
> One quick recommendation for folks using this....?? I was trying to get the last 3 colonies, and would click on the Green (uncontacted) colony and try for a bit and if unsuccessful, just click on the next colony I was looking for.? I got my butt chewed by
the colony operator of K2C.? I clicked in on Green K2C in the ACLog window and hit him with my call when he called "CQ K2C Colonies".? He relied "K4EES, is? a 6 callsign?"? I think he wanted to add "jerk" at the end.?? I told him no and asked if he was playing
the 'Numbers game'.? He said he was and, of course, I apologized.? But, he didn't say he was calling for 6's on that exchange....? the only one I had heard.
>
> Anyway, thanks Scott for the 13-Colonies feature.? It's made the 'contest' easy to work.
> --
> Ken - K4EES
>
>
>
>
>
|
Re: AC Log to LOTW error?
Have you checked the dates on your signing certificates in TWSL?
You can display the dates by viewing the properties.
if the QSO was before your earliest date on the certificate then TQSL will not sign it.
--
Jason Johnson
K3JSJ
|
Tony Yamin
Ken Bell
Dave wo2x
Jim Shorney
Bob AF9W