开云体育

I'm sure this has probably been discussed, but I don't remember when... This morning I was scanning across 15 & 20 meters for Parks On The Air stations to work, and I managed to work a few... Later this afternoon while looking at my Hunters log on the POTA website and I notice that one of the stations I had worked this morning had activated a 2-fer (an area where one entity like a State Park overlaps with a National Park, Historic Trail, WMA, etc) and their log shows an entry for the entity I logged plus another one. What is the easiest or best way for me to duplicate the one entry in my log so I can have one entry in my log for each POTA entity I worked? -- I'm good in the callbook! 47 & 73 de Travis KB5ILY / PG00041468 870-260-6068 (Phone) -- Travis W. Burton, NP, ESQ., KB5ILY (QCWA #36353) & GROL / Arkadelphia AR President, DeGray Amateur Radio club, Inc. EC - Clark County AR / Assistant Section Emergency Coord., SWAR SATERN, ARRL Instructor & VE, AREC I, II & III W5YI Instructor & VE ARRL Technical Specialist Internet: mailto:kb5ily@... WWW: http://www.kb5ily.org WWW: http://www.qcwa.org/kb5ily-36353.htm GOD BLESS THE UNITED STATES of AMERICA Only he who Attempts the Ridiculous can Achieve the Impossible. (WILL HENRY) Linux is my operating system of choice. Computers are like Air Conditioners, they stop working correctly when you open windows. <><

Hi Bill, Thanks for your e-mail. Use the default File Share for AC Log. To network multiple PCs, simply put your log file in a location that is accessible to all the PCs you wish to network by clicking File > Save As. Then, from the other PCs, click File > Open, navigate to the file and select it. Any contacts you enter should appear on all PCs in a minute or less (depending on the refresh rate you set). That's all there is to it! Lots more details are here: https://www.n3fjp.com/help/networkinghelp.html Enjoy! 73, Scott N3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect... On Tuesday, April 1, 2025 at 04:45:25 PM EDT, Bill Gillenwater via groups.io <k3sv@...> wrote: I want to put my full ACL log on another computer in the shack. And, be able to update the log from either computer. For example. If I am running WSJT on one computer on 20 meters and WSJT on another computer on 17 meters, when I log a QSO on either computer I want the log to update. I understand I have to keep one of the computers as the "MAIN" home for the log. I just want update my contact log each time I make a QSO and not have to pencil/note the contact and transfer it over. I'm confused on "file sharing" in networking. I can't seem to get things to work properly. I can automatically log directly to ACL on my primary computer but when I make a QSO from the other station set-up, it goes nowhere. Help. 73 Bill K3SV

Hi Scott, I know this question has been asked before, so my apologies. On the World Map, it shows my QTH to be in the middle of Nevada when I actually live and operate from Bend, Oregon. How do I correct this? Thanks, Jim W7JHR

Hi Scott, This past weekend I decided to use your CQ WPX logging software instead of N1MM+. I’m strictly a search and pounce low hour contest operator. I found your software very enjoyable to use. It has all the features I need without being overly complicated. I did have one intermittent issue. Several times while I was hitting the space bar after typing a call, the fields would get wiped just as if I was hitting the escape key. I had the world map open and wondered if it was related to the map updating so I turned it off but still had the issue. This happened probably 10 times during the weekend while accumulating 275 contacts. I didn’t miss out on any log contacts because of that but it was disconcerting when it happened. I’m running the latest version of Windows 11 and was using rig control. Everything else was flawless. I’m looking forward to the next contest to try one of your other versions. All the best, Joel, KB1KBD

Has anyone figured out how to use the 'CREDIT_GRANTED' field from LOTW with ACLOG? It isn't exactly critical ... the info can be found by looking at the LOTW ADIF, or logging into LOTW website. Thanks, -Mat, N8TW

When I uplaod World Map my signature and the yellow star is place wrong, outside west coast of Africa. My signature and Grid in the setting is correct. Why? Mvh Jan Oliversen LA7TO

Scott, This is a problem with my computer and not the software….I’m assuming. Just want to see if anyone else has experienced/fixed this issue. I turned on the Spotting function a while back and it works fine. I suddenly began to see that when in FT8 I would click on a call in WSJTX and N3FJP will give me an error message “operation timed out” but as soon as I click “OK” the info for the QSO correctly populates in the log. It’s just bothersome. Anyone else experience this? Again, probably some Windows thing maybe. Any help appreciated. Thanks, KN4ULT Paul

For 7.0.11.3 posted today - was a new feature added to play with or just a bug fix? Thanks, W

When I start the program, I first get the message at the top for a while (no response). Only after a certain time does the program start normally and then reload the logbook. Before that, no function works in the program. 73! Joerg (DC9JVN)

Whenever I try to download eQSL contacts, after uploading, I get the following: Unable to find the 'Your ADIF log file has been built' tag. Please be sure your user name and password are correct, that you have entered a date old enough to include at least one eQSL inbox record and try again. Download complete. Please click Done to see the updates on your main list. * I've tried waiting several days without doing any downloads, though I did uploads, so that the eQSL Inbox might have some unhandled confirmations, yet I still get the message. When I go to eQSL, the Inbox does have some QSOs to download/confirm. Any help would be appreciated. Otherwise, I have to confirm the QSL received in the ACLog table manually. Thanks, 73 and Clear Skies, Brian D. Warner WB0NWZ ----- Original Message ----- From: Scott Davis via groups.io [mailto:SNKDavis@...] To: "[email protected]" <[email protected]> Sent: Sat, 29 Mar 2025 10:08:19 +0000 (UTC) Subject: Re: [N3FJPSoftwareUsers] What am I missing? Hi Alan, Thanks for your e-mail. That error message is being returned from ARRL's TQSL software, not AC Log. This FAQ will get you going: Why am I seeing a message about duplicates when I upload contacts to LoTW? https://www.n3fjp.com/faq.html#q71 Enjoy! 73, ScottN3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect... On Friday, March 28, 2025 at 09:35:42 PM EDT, Alan W4ANT via groups.io <alan.w4ant@...> wrote: I looked into that, the QSO is marked Y in the sent column although it's not a LOTW user so it's not confirmed. I deleted all the QSO's from that callsign and tried again. Again I got the same "line 38" has already been uploaded but it's a different callsign. When checking that callsign, I'm finding them marked as sent YES but again not confirmed by LOTW. If it makes any difference they all seem to be QSO party contacts where I have multiple contacts on the same day with the same callsign. However, they are not true duplicates as the time and county information has changeed. Alan W4ANT

I know the answer is out there but cannot find it. I want to be able to search one of the custom fields I made (JARL City/Gun number and name) and want to search by just part of the data. For example, for data = 1051 - Nakagawa, I want to be able to searchand find all QSO records that have data starting with 1051. I tried asterick (*) and $, did not work. Appreciate a solution (assuming there is one). FYI - just entered my 25,000th QSO into N3FJP last week. Awesome software. Thanks, Bob, KD6C

Test.

There are new country files for ACLog and related software by N3FJP. To update the country files from the logging program menu, select: Files -> Download Country Files From AD1C You should download all three files. When done, you can re-start your logging program. Manual installation instructions are here: https://www.country-files.com/n3fjp-info/ Here are the release notes: https://www.country-files.com/n3fjp-25-march-2025/ N3FJP Country Files - 25 March 2025 Version entity is Amsterdam & St. Paul Is., FT/Z Added Prefixes/Callsigns: * GB5PAT and GB5EA are both Northern Ireland, GI * KL7CLH and KL1WE are both USA, K in CQ Zone 3, ITU Zone 6 * W0ERJ, KL2MU, K0VSH and AL0K are all USA, K in CQ Zone 4, ITU Zone 8 * KL5WY and KH7HY are both USA, K in CQ Zone 5, ITU Zone 8 * KK4PEQ is Hawaii, KH6 * KT5Z, KN6NFQ, KF7HGR and KF7HGP are all Alaska, KL7 * KM4DNE and K4W are both Puerto Rico, KP4 * R8XF/1 is European Russia, UA in CQ Zone 16, ITU Zone 29 * RU9CK/M and R4HY/8 are both Asiatic Russia, UA9 in CQ Zone 17, ITU Zone 30 * VK4YQS is Lord Howe I., VK9L Removed Prefixes/Callsigns: * FO/F4LYI in Marquesas Is., FO/M * W9SSS in USA, K in CQ Zone 3, ITU Zone 6 * WB9AUV and KH7HY in USA, K in CQ Zone 4, ITU Zone 7 * KL2MU in USA, K in CQ Zone 5, ITU Zone 8 * K5ZYO in Hawaii, KH6 * KK7UFN in Alaska, KL7 * R8XF/1 in European Russia, UA in CQ Zone 16, ITU Zone 29 * RU9CK/M and R4HY/8 in Asiatic Russia, UA9 in CQ Zone 17, ITU Zone 30 If you have any questions, send E-mail to Jim Reisert AD1C (at the address below) or make a post to the N3FJP software users reflector. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

Hi all, Prepping for NA SSB sprint tomorrow night. I downloaded latest program version so that is good. I looked at the shortcuts list because I remember that Scott had added shortcuts to do the big frequency jumps required of all operators after your second contact on a frequency. SSB: Ctrl + Left / Right(large jump) : +-500 Hz Ctrl + Shift + Left / Right(medium jump) : +-150 Hz Ctrl + Up / Down(small jump) : +-50 Hz Ctrl + Shift + Up / Down(tiny jump) : +-10 Hz Ctrl + PgUp / PgDn (NA Sprint large jump) : +- 5000 Hz Ctrl + Shift + PgUp / PgDn (NA Sprint small jump) : +- 1000 Hz I have an Yaesu FT847 (Yaesu Old/57600/8/2/none). It propersly tracks my dial frequency and I can send frequency commands via the regular Cntrl-F command, but the above command do not work. What am I missing? 73 Tom, N5HYP