Keyboard Shortcuts
Likes
- N3FJPSoftwareUsers
- Messages
Search
|
WSJT-x Receives but no transmit
I prefer to have N3FJP control the radio and have WSJT-x communicate with N3FJP. I have the API running and it is communicating with WSJT. Audio codec used by WSJT are worded as follows: Input: LINE (2-USB AUDIO CODEC) Output: SPEAKERS (2-USB AUDIO CODEC).?I can control band operation from WSJT and all appears normal.? I receive and decode FT8 although I have absolutely no idea how the audio is getting into my computer's sound card. When I transmit, I get nothing. FT8 power bar in lower right corner is on max and the yellow transmit bar shows up on WSJT showing I am "Transmitting". Radio is a Yaesu FTdx101MP.? I am clueless as to the route both input and output audio actually takes. BTW CW and SSB output works fine.
Any clue as to why no audio to the radio? Chuck AD4ES |
|
Re: K3 w kio3b n3fjp and vspe
开云体育Hi, Mel, ? I don’t know if this solution would work for you or not, but it *seems* to be like an issue using programs like FLDigi with OmniRig. If it is similar, this video might help Basically, you use the virtual com ports and then use something like HD-SDR to make the requests. Obviously, if it isn’t similar, this might not work for you. ? Have a great day. ? ? ? From: [email protected] <[email protected]> On Behalf Of Mel Marcus
Sent: Thursday, July 13, 2023 9:10 AM To: [email protected] Subject: Re: [N3FJPSoftwareUsers] K3 w kio3b n3fjp and vspe ? Scott ? I sure hope so because I am not moving away N3FJP systems. The programs work perfectly for me, they are easier to understand that other systems. In the 8 years I have been using the product I have not had 1 logging failure in the acl or contest product. The only problem I have is this one trying to get the logging program and the CW to travel down the same usb cable to the k3. the n3fjp product? cw product indicates that the comm port is not available if the logging program is operating.? an example is the radio uses com port 3 the acl picks up comm 3 immediately, but the cw portion does not? work saying comm3 is already in use.? the solution is using a virtual serial port emulator. comm 3 goes to the vspe, then the vspe creates a virtual comm port 4 and then communicates with the acl and the cw . i think if your team had the time, this problem could easily?be solved so that people would not have to use vspe or an external device. ? thanks again for you wonderful products ? Mel NE9A From: [email protected] <[email protected]> on behalf of Scott Davis via groups.io <SNKDavis@...> ? Hi Mel, ? Thanks for your follow up.? As always, we encourage everyone to use the software that they enjoy the most and fits their operating style best. ? We've not ever used a K3 or port splitter here, so we don't have any insights on your question.? Hopefully another K3 user will have some additional information to offer. ? Enjoy! ? 73, Scott N3FJP ? ? ? 开云体育 the Amateur Radio community with contesting and general logging software since 1997. ? 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... ? ? On Wednesday, July 12, 2023 at 11:16:17 AM EDT, Mel Marcus <melm@...> wrote: ? ? no answer really provided scott, they told me to use N1MM, do you wish me to take their advice ? Mel From: [email protected] <[email protected]> on behalf of Wes Stewart via groups.io <n7ws@...> ? Answered in the Elecraft group. |
|
Re: K3 w kio3b n3fjp and vspe
开云体育
Scott
I sure hope so because I am not moving away N3FJP systems. The programs work perfectly for me, they are easier to understand that other systems. In the 8 years I have been using the product I have not had 1 logging failure in the acl or contest product. The
only problem I have is this one trying to get the logging program and the CW to travel down the same usb cable to the k3. the n3fjp product? cw product indicates that the comm port is not available if the logging program is operating.? an example is the radio
uses com port 3 the acl picks up comm 3 immediately, but the cw portion does not? work saying comm3 is already in use.? the solution is using a virtual serial port emulator. comm 3 goes to the vspe, then the vspe creates a virtual comm port 4 and then communicates
with the acl and the cw . i think if your team had the time, this problem could easily?be solved so that people would not have to use vspe or an external device.
thanks again for you wonderful products
Mel
NE9A
From: [email protected] <[email protected]> on behalf of Scott Davis via groups.io <SNKDavis@...>
Sent: Thursday, July 13, 2023 06:31 To: [email protected] <[email protected]> Subject: Re: [N3FJPSoftwareUsers] K3 w kio3b n3fjp and vspe ?
Hi Mel,
Thanks for your follow up.? As always, we encourage everyone to use the software that they enjoy the most and fits their operating style best.
We've not ever used a K3 or port splitter here, so we don't have any insights on your question.? Hopefully another K3 user will have some additional information to offer.
Enjoy!
73, Scott
N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give
. But do this with gentleness and respect...
On Wednesday, July 12, 2023 at 11:16:17 AM EDT, Mel Marcus <melm@...> wrote:
no answer really provided scott, they told me to use N1MM, do you wish me to take their advice
Mel
From: [email protected] <[email protected]> on behalf of Wes Stewart via groups.io <n7ws@...>
Sent: Wednesday, July 12, 2023 09:11 To: [email protected] <[email protected]> Subject: Re: [N3FJPSoftwareUsers] K3 w kio3b n3fjp and vspe ?
Answered in the Elecraft group.
|
|
N3FJP Country Files - 13 July 2023
There are new country files for ACLog and related software by N3FJP.
To update the country files from the logging program menu, select: Files -> Download Country Files From AD1C You should download all three files. When done, you can re-start your logging program. Manual installation instructions are here: Here are the release notes: N3FJP Country Files - 13 July 2023 Version entity is Bhutan, A5 Added Prefixes/Callsigns: * 3D2BJ is Rotuma I., 3D2/R * EA5ISM/9 is Ceuta & Melilla, EA9 * GB2TS is Shetland Is., GM * GB2TMH and GB0DUN are both Scotland, GM/t * 5K0ARC, 5K0BG and 5K0CB are all Colombia, HK * II9HQ is Sicily, IT9 * WH6X, WH6OA, WH6NZ, WB8VLC, WA8ZID, WA4ELK, W9JXT, W9EN, W3WRC, NL7IV, NH2JE/7, N1AV, N1AQR, KL1SF, KJ4HEW, KB5ZYC, K5PSN, K5DTC and K3RN are all USA, K in CQ Zone 3, ITU Zone 6 * WL7II, WB8QZM, WB8EJN, WB4KTF, WA9Z, WA9LT, W9YV, W9RM, W9DP, W2OZB, N6EB, KN4FRG, KD7UAV, KB9HGI, KB9DAK, KA8MMI, K9WKJ, K9MK, K8OM, K4SSO and K2SHN are all USA, K in CQ Zone 4, ITU Zone 7 * WT4W, WN2E, WH6MW, WA4CAX, W5UMS, W5HVV, W5BLX, W4TRC, W4PCA, W4OLB, W4JNB, W4IAX, W4HLR, W4GGM, W4EM, W4DHN, NN4H, N4OG, N4LR, N4CVG, N0ZO, N0VRS, N0TTI, KY4ARC, KX4I, KS4OP, KJ4LTA, KI5UXN, KG4LKY, KD5USA, KD4ULD, KC4WPS, KC4FLT, K4RST, K4RFT, K4PJ, K4MSU, K4FBC, K4CPO, AA5UZ and AA4CW are all USA, K in CQ Zone 4, ITU Zone 8 * WV8AR, WP4DP, WH6BZ, WB9RRU, W9KXI, W8VA, W8UV, W8GK, W8CUL, NY9G, N9NFT, KD8YWF, K5EEE, AL0FT and AH6FX are all USA, K in CQ Zone 5, ITU Zone 8 * KE6AEZ is Hawaii, KH6 * KI7HOC and KC0QOB are both Alaska, KL7 * K2ATZ is US Virgin Is., KP2 * RW6MD/1 is European Russia, UA in CQ Zone 16, ITU Zone 19 * UB5O/M, UB0ADL/6, RV9WB/M, RA9JA/4, R8WB/M and R1CF/M are all European Russia, UA in CQ Zone 16, ITU Zone 29 * R2DXU/8 is Asiatic Russia, UA9 in CQ Zone 17, ITU Zone 20 * RN9N/M is Asiatic Russia, UA9 in CQ Zone 18, ITU Zone 31 * RA4RT/0 is Asiatic Russia, UA9 in CQ Zone 19, ITU Zone 30 * RD30RR is Asiatic Russia, UA9 in CQ Zone 19, ITU Zone 33 * R9HAF/M is Asiatic Russia, UA9 in CQ Zone 19, ITU Zone 34 * VK4EW/P and VK4EW/8 are both Australia, VK in CQ Zone 29, ITU Zone 55 * VK5DG/9 is Norfolk I., VK9N Removed Prefixes/Callsigns: * EA9PD in Spain, EA * W4IX, K0JJ and AL0FT in USA, K in CQ Zone 3, ITU Zone 6 * N7MZW, KF6YU and K8LS in USA, K in CQ Zone 4, ITU Zone 7 * W5BLX, KD7UAV, AL4U and AH7B in USA, K in CQ Zone 5, ITU Zone 8 * KJ4HEW in Alaska, KL7 * UB5O/M, RV9WB/M and R1CF/M in European Russia, UA in CQ Zone 16, ITU Zone 29 * R8WB/M in European Russia, UA in CQ Zone 16, ITU Zone 30 * RW6MD/1 in European Russia, UA in CQ Zone 17, ITU Zone 20 * R2DXU/8 in Asiatic Russia, UA9 in CQ Zone 17, ITU Zone 20 * RN9N/M in Asiatic Russia, UA9 in CQ Zone 17, ITU Zone 30 * R9HAF/M in Asiatic Russia, UA9 in CQ Zone 18, ITU Zone 31 If you have any questions, send E-mail to Jim Reisert AD1C (at the address below) or make a post to the N3FJP software users reflector. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, |
|
Re: K3 w kio3b n3fjp and vspe
Hi Mel, Thanks for your follow up.? As always, we encourage everyone to use the software that they enjoy the most and fits their operating style best. We've not ever used a K3 or port splitter here, so we don't have any insights on your question.? Hopefully another K3 user will have some additional information to offer. Enjoy! 73, Scott N3FJP 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Wednesday, July 12, 2023 at 11:16:17 AM EDT, Mel Marcus <melm@...> wrote:
no answer really provided scott, they told me to use N1MM, do you wish me to take their advice
Mel
From: [email protected] <[email protected]> on behalf of Wes Stewart via groups.io <n7ws@...>
Sent: Wednesday, July 12, 2023 09:11 To: [email protected] <[email protected]> Subject: Re: [N3FJPSoftwareUsers] K3 w kio3b n3fjp and vspe ?
Answered in the Elecraft group.
|
|
Re: K3 w kio3b n3fjp and vspe
开云体育
no answer really provided scott, they told me to use N1MM, do you wish me to take their advice
Mel
From: [email protected] <[email protected]> on behalf of Wes Stewart via groups.io <n7ws@...>
Sent: Wednesday, July 12, 2023 09:11 To: [email protected] <[email protected]> Subject: Re: [N3FJPSoftwareUsers] K3 w kio3b n3fjp and vspe ?
Answered in the Elecraft group.
|
|
Re: TSM delay
Yes, I would move the log database to your PC.? I doubt TSM is the issue but you could disable TSM for your testing.
toggle quoted message
Show quoted text
73, Mitch On Tue, Jul 11, 2023 at 08:46 PM, Dave Edwards wrote:
|
|
Re: TSM delay
开云体育Mitch. The version of ACLog is the latest, installed last week. I don't think I had a time problem just logging the QSO, just when I hit enter, it would take about 3 seconds to send the F3 contents. Log is in Google Drive, so cloud. I don't believe I have it uploading to LOTW after each contact....in fact, I didn't know you could do that! Sounds like I should try it with the log local, and see if that fixes the issue?? ....Dave On 7/11/23 8:46 PM, Mitch NW0M via
groups.io wrote:
On Tue, Jul 11, 2023 at 01:25 PM, Dave Edwards wrote: |
|
Re: TSM delay
On Tue, Jul 11, 2023 at 01:25 PM, Dave Edwards wrote:
If F3 works fine by itself, but enter exhibits the delay, is it possible that the program is getting bogged down a bit with needing to log the call in the logbook PLUS execute F3?HI Dave,
73, Mitch |
|
Re: WSJT-X sending direct to networked N3FJP box
We use a Raspberry Pi for our fileserver, and a python script to wrangle the band/status chattiness in lieu of attempting?to run the log program on the Pi.? Works a treat, but also means we couldn't set up Mac WSJT-X without having a suitable destination for the QSOs.? It'd be nice to know whether those WSJT-X QSOs could just be sent to any old workstation that's doing logging to get added to the log file. On Tue, Jul 11, 2023 at 3:45?PM Richard - N1RBD <groups.io@...> wrote: On Tue, Jul 11, 2023 at 02:41 PM, Thomas wrote: --
-Thomas AC9BJ Mount Horeb, WI ?EN53da he/him/his |
|
K3 w kio3b n3fjp and vspe
开云体育
As many of you know using the n3fjp software with a k3 kio3b to operate cw requires a virtual serial port emulator. does anyone have an example of how the set up the vspe. assume that the k3iob is com4
Thanks
Mel
NE9A
|
|
Re: WSJT-X sending direct to networked N3FJP box
On Tue, Jul 11, 2023 at 02:41 PM, Thomas wrote:
We run 3A so people generally just yell "What band are you on?" and TBH, I think I'm the only one who used the status screen to see where people were at or the spotter.? I'm hoping to do a presentation on the "advanced" featured before next FD.? We only have 5 radio operators this year and it's mostly a social event for us, but I'm the one who has to deal with the logs so I'm just trying to make it easier on me.? We definitely eat better than we play radio for FD.? Seems? 10x more people show up for dinner than to operate.? LOL |
|
Re: WSJT-X sending direct to networked N3FJP box
开云体育He would probably have to run Windows either in a Virtual Machine, or Parallels then, I would guess. I’m not a Mac person either. But I would imagine having a VM running AC Log (or Field Day) in full screen inside of the window would work. Most likely, he would have to use an external monitor (or it would be a small window on his desktop). Trying to get N3FJP running through WinE or other emulators is a hit and miss (more miss) effort. ? To be clear, he would have WSJT-X running in a window on his Mac, and the VM running in a second Window. He could potentially have WSJT-X communicate with the VM and have the program on the VM connected to the server. Having said all of this, I would think it’d be much easier to either run Windows using Parallels, or just use a Windows PC instead. I’m just tossing out ideas in case he’s against installing Windows and insists on using his Mac. ? Have a great day. ? ? From: [email protected] <[email protected]> On Behalf Of Richard - N1RBD
Sent: Tuesday, July 11, 2023 1:16 PM To: [email protected] Subject: Re: [N3FJPSoftwareUsers] WSJT-X sending direct to networked N3FJP box ? Since N3FJP doesn't natively run on the MAC, it won't be connecting to the server, only running WSJT-X.? That's why we're looking at the best way to get his digital Qs over to the shared DB.? He's tried in under a Windows emulator but has not been able to get it to work.? I'm a Windows/Linux/VMWare guy so I have to defer to his knowledge of the Mac.? :) |
|
Re: WSJT-X sending direct to networked N3FJP box
If you have one particular computer set up?as a server and not doing any actual logging (e.g. log serving and maybe showing a sections-worked map), then I would assume you could configure WSJT-X to point to that computer?to do its logging. I don't know if the computer will want to impose its notion of current band and mode, though. On Tue, Jul 11, 2023 at 1:15?PM Richard - N1RBD <groups.io@...> wrote: Since N3FJP doesn't natively run on the MAC, it won't be connecting to the server, only running WSJT-X.? That's why we're looking at the best way to get his digital Qs over to the shared DB.? He's tried in under a Windows emulator but has not been able to get it to work.? I'm a Windows/Linux/VMWare guy so I have to defer to his knowledge of the Mac.? :) --
-Thomas AC9BJ Mount Horeb, WI ?EN53da he/him/his |
|
Re: TSM delay
开云体育If F3 works fine by itself, but enter exhibits the delay, is it possible that the program is getting bogged down a bit with needing to log the call in the logbook PLUS execute F3? My other thought is to try it with no output...in the case that
RF is doing goofy things. This is with the single USB cable running the 7610 rig control
and also CW keying. .....Dave On 7/11/23 7:58 AM, Scott Davis via
groups.io wrote:
|
|
Re: WSJT-X sending direct to networked N3FJP box
Since N3FJP doesn't natively run on the MAC, it won't be connecting to the server, only running WSJT-X.? That's why we're looking at the best way to get his digital Qs over to the shared DB.? He's tried in under a Windows emulator but has not been able to get it to work.? I'm a Windows/Linux/VMWare guy so I have to defer to his knowledge of the Mac.? :)
|
|
Re: WSJT-X sending direct to networked N3FJP box
开云体育I would venture that Scott Davis will have the best answer for this. My opinion is that it should have an instance of N3FJP running on the computer and that should contact the server. Mainly because you run into the issue of both the Mac and another computer trying to update the server share at the same time. Also by having the Mac run an instance of N3FJP on it, you gain the benefit of it alerting if you’re running on the same band/mode as another station and the ability to send messages between stations. ? That being said, having WSJT-X contact the server directly does work. I have had a setup for a short time where I was running Build-A-Pi (or Ham-Pi) on a Raspberry Pi and having it log to my main desktop’s copy of AC Log. But that was the only device that was logging to the desktop, so I didn’t run into any potential issues. ? Have a great day. ? ? From: [email protected] <[email protected]> On Behalf Of Richard - N1RBD
Sent: Tuesday, July 11, 2023 11:37 AM To: [email protected] Subject: [N3FJPSoftwareUsers] WSJT-X sending direct to networked N3FJP box ? I'm revamping our "IT Infrastructure" for Field Day next year and have a question regarding the sending from WSJT-X directly to N3FJP.? Is it ok for the digital station to send directly to an instance of N3FJP running on the file server in a networked environment or should it sent to a dedicated logging PC assigned to that station?? I ask because our main digital op uses a Mac and next year we'd like him to be able to log directly to the shared database. |
|
WSJT-X sending direct to networked N3FJP box
I'm revamping our "IT Infrastructure" for Field Day next year and have a question regarding the sending from WSJT-X directly to N3FJP.? Is it ok for the digital station to send directly to an instance of N3FJP running on the file server in a networked environment or should it sent to a dedicated logging PC assigned to that station?? I ask because our main digital op uses a Mac and next year we'd like him to be able to log directly to the shared database. |
Wes Stewart
Thomas