Yes, I would move the log database to your PC.? I doubt TSM is the issue but you could disable TSM for your testing.
73, Mitch
toggle quoted message
Show quoted text
On Tue, Jul 11, 2023 at 08:46 PM, Dave Edwards wrote:
Mitch. The version of ACLog is the latest, installed last week.
I don't think I had a time problem just logging the QSO, just when I hit enter, it would take about 3 seconds to send the F3 contents.
Log is in Google Drive, so cloud.
I don't believe I have it uploading to LOTW after each contact....in fact, I didn't know you could do that!
Sounds like I should try it with the log local, and see if that fixes the issue??
....Dave
|
Mitch. The version of ACLog is the latest, installed last week.
I don't think I had a time problem just logging the QSO, just
when I hit enter, it would take about 3 seconds to send the F3
contents.
Log is in Google Drive, so cloud.
I don't believe I have it uploading to LOTW after each
contact....in fact, I didn't know you could do that!
Sounds like I should try it with the log local, and see if that
fixes the issue??
....Dave
On 7/11/23 8:46 PM, Mitch NW0M via
groups.io wrote:
toggle quoted message
Show quoted text
On Tue, Jul 11, 2023 at 01:25 PM, Dave Edwards wrote:
If F3 works fine by itself, but enter exhibits the
delay, is it possible that the program is getting bogged down a
bit with needing to log the call in the logbook PLUS execute F3?
HI Dave,
- What version of ACLog are you running?
- Taking TSM out of the equation, does it also take 3 seconds
to log a QSO in the normal method (Enter key or click Log
Contact)?
- Does your ACLog database reside on your PC or in the Cloud?
- Do you have the setting enabled to upload to LOTW after each
logged QSO?
73, Mitch
|
On Tue, Jul 11, 2023 at 01:25 PM, Dave Edwards wrote:
If F3 works fine by itself, but enter exhibits the delay, is it possible that the program is getting bogged down a bit with needing to log the call in the logbook PLUS execute F3?
HI Dave,
- What version of ACLog are you running?
- Taking TSM out of the equation, does it also take 3 seconds to log a QSO in the normal method (Enter key or click Log Contact)?
- Does your ACLog database reside on your PC or in the Cloud?
- Do you have the setting enabled to upload to LOTW after each logged QSO?
73, Mitch
|
Re: WSJT-X sending direct to networked N3FJP box
We use a Raspberry Pi for our fileserver, and a python script to wrangle the band/status chattiness in lieu of attempting?to run the log program on the Pi.? Works a treat, but also means we couldn't set up Mac WSJT-X without having a suitable destination for the QSOs.? It'd be nice to know whether those WSJT-X QSOs could just be sent to any old workstation that's doing logging to get added to the log file.
On Tue, Jul 11, 2023 at 3:45?PM Richard - N1RBD < groups.io@...> wrote: On Tue, Jul 11, 2023 at 02:41 PM, Thomas wrote:
If you have one particular computer set up?as a server and not doing any actual logging (e.g. log serving and maybe showing a sections-worked map), then I would assume you could configure WSJT-X to point to that computer?to do its logging.
?
I don't know if the computer will want to impose its notion of current band and mode, though.
We run 3A so people generally just yell "What band are you on?" and TBH, I think I'm the only one who used the status screen to see where people were at or the spotter.? I'm hoping to do a presentation on the "advanced" featured before next FD.? We only have 5 radio operators this year and it's mostly a social event for us, but I'm the one who has to deal with the logs so I'm just trying to make it easier on me.? We definitely eat better than we play radio for FD.? Seems? 10x more people show up for dinner than to operate.? LOL
-- -Thomas AC9BJ Mount Horeb, WI ?EN53da he/him/his
|
K3 w kio3b n3fjp and vspe
As many of you know using the n3fjp software with a k3 kio3b to operate cw requires a virtual serial port emulator. does anyone have an example of how the set up the vspe. assume that the k3iob is com4
Thanks
Mel
NE9A
|
Re: WSJT-X sending direct to networked N3FJP box
On Tue, Jul 11, 2023 at 02:41 PM, Thomas wrote:
If you have one particular computer set up?as a server and not doing any actual logging (e.g. log serving and maybe showing a sections-worked map), then I would assume you could configure WSJT-X to point to that computer?to do its logging.
?
I don't know if the computer will want to impose its notion of current band and mode, though.
We run 3A so people generally just yell "What band are you on?" and TBH, I think I'm the only one who used the status screen to see where people were at or the spotter.? I'm hoping to do a presentation on the "advanced" featured before next FD.? We only have 5 radio operators this year and it's mostly a social event for us, but I'm the one who has to deal with the logs so I'm just trying to make it easier on me.? We definitely eat better than we play radio for FD.? Seems? 10x more people show up for dinner than to operate.? LOL
|
Re: WSJT-X sending direct to networked N3FJP box
He would probably have to run Windows either in a Virtual Machine, or Parallels then, I would guess. I’m not a Mac person either. But I would imagine having a VM running AC Log (or Field Day) in full screen inside of the window would work. Most likely, he would have to use an external monitor (or it would be a small window on his desktop). Trying to get N3FJP running through WinE or other emulators is a hit and miss (more miss) effort. ? To be clear, he would have WSJT-X running in a window on his Mac, and the VM running in a second Window. He could potentially have WSJT-X communicate with the VM and have the program on the VM connected to the server. Having said all of this, I would think it’d be much easier to either run Windows using Parallels, or just use a Windows PC instead. I’m just tossing out ideas in case he’s against installing Windows and insists on using his Mac. ? Have a great day. ?
Patrick. ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Richard - N1RBD Sent: Tuesday, July 11, 2023 1:16 PM To: [email protected]Subject: Re: [N3FJPSoftwareUsers] WSJT-X sending direct to networked N3FJP box ? Since N3FJP doesn't natively run on the MAC, it won't be connecting to the server, only running WSJT-X.? That's why we're looking at the best way to get his digital Qs over to the shared DB.? He's tried in under a Windows emulator but has not been able to get it to work.? I'm a Windows/Linux/VMWare guy so I have to defer to his knowledge of the Mac.? :)
|
Re: WSJT-X sending direct to networked N3FJP box
If you have one particular computer set up?as a server and not doing any actual logging (e.g. log serving and maybe showing a sections-worked map), then I would assume you could configure WSJT-X to point to that computer?to do its logging.
I don't know if the computer will want to impose its notion of current band and mode, though.
On Tue, Jul 11, 2023 at 1:15?PM Richard - N1RBD < groups.io@...> wrote: Since N3FJP doesn't natively run on the MAC, it won't be connecting to the server, only running WSJT-X.? That's why we're looking at the best way to get his digital Qs over to the shared DB.? He's tried in under a Windows emulator but has not been able to get it to work.? I'm a Windows/Linux/VMWare guy so I have to defer to his knowledge of the Mac.? :)
-- -Thomas AC9BJ Mount Horeb, WI ?EN53da he/him/his
|
If F3 works fine by itself, but enter exhibits the delay, is it
possible that the program is getting bogged down a bit with
needing to log the call in the logbook PLUS execute F3?
My other thought is to try it with no output...in the case that
RF is doing goofy things.
This is with the single USB cable running the 7610 rig control
and also CW keying.
.....Dave
On 7/11/23 7:58 AM, Scott Davis via
groups.io wrote:
toggle quoted message
Show quoted text
Hi Dave,
Thanks for your e-mail.? I'm sorry that
you are still having trouble.? I've already replied to
your thread here:
I don't currently have any additional
insights to add, but I will continue to try and
duplicate what you are experiencing.
Enjoy!
73, Scott
N3FJP
开云体育 the Amateur Radio community with
contesting and general logging software since
1997.
1 Peter 3 vs 15: Always be
prepared to give an answer to everyone who
asks you to give . But do this with gentleness
and respect...
On Monday, July 10, 2023 at 05:38:33 PM EDT, Dave
Edwards <kd2e@...> wrote:
Hi Scott....
Can you suggest what to look at for this
scenario?
I have an Icom 7610, and all is working,
but...
When sending CW from messages in F
registers using TSM,
The tab correctly sends the contents of F2,
but
the return sends the contents of F3 after
about a 3 second delay.
It all works, except for the delay.? The
computer is pretty fast and
recent, so I
don't think its a matter of a slow cpu.?
Hitting F3 sends the contents
immediately.
Thanks for any thoughts.
....Dave
|
Re: WSJT-X sending direct to networked N3FJP box
Since N3FJP doesn't natively run on the MAC, it won't be connecting to the server, only running WSJT-X.? That's why we're looking at the best way to get his digital Qs over to the shared DB.? He's tried in under a Windows emulator but has not been able to get it to work.? I'm a Windows/Linux/VMWare guy so I have to defer to his knowledge of the Mac.? :)
|
Re: WSJT-X sending direct to networked N3FJP box
I would venture that Scott Davis will have the best answer for this. My opinion is that it should have an instance of N3FJP running on the computer and that should contact the server. Mainly because you run into the issue of both the Mac and another computer trying to update the server share at the same time. Also by having the Mac run an instance of N3FJP on it, you gain the benefit of it alerting if you’re running on the same band/mode as another station and the ability to send messages between stations. ? That being said, having WSJT-X contact the server directly does work. I have had a setup for a short time where I was running Build-A-Pi (or Ham-Pi) on a Raspberry Pi and having it log to my main desktop’s copy of AC Log. But that was the only device that was logging to the desktop, so I didn’t run into any potential issues. ? Have a great day. ?
Patrick. ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Richard - N1RBD Sent: Tuesday, July 11, 2023 11:37 AM To: [email protected]Subject: [N3FJPSoftwareUsers] WSJT-X sending direct to networked N3FJP box ? I'm revamping our "IT Infrastructure" for Field Day next year and have a question regarding the sending from WSJT-X directly to N3FJP.? Is it ok for the digital station to send directly to an instance of N3FJP running on the file server in a networked environment or should it sent to a dedicated logging PC assigned to that station?? I ask because our main digital op uses a Mac and next year we'd like him to be able to log directly to the shared database.
So.....
#1??? Mac --->? N3FJP running on file server PC
#2??? Mac --->? N3FJP running on Windows logging PC assigned to digital station which is connected to the shared database
Any "best practice" or would either work?
Thanks.
|
WSJT-X sending direct to networked N3FJP box
I'm revamping our "IT Infrastructure" for Field Day next year and have a question regarding the sending from WSJT-X directly to N3FJP.? Is it ok for the digital station to send directly to an instance of N3FJP running on the file server in a networked environment or should it sent to a dedicated logging PC assigned to that station?? I ask because our main digital op uses a Mac and next year we'd like him to be able to log directly to the shared database.
So.....
#1??? Mac --->? N3FJP running on file server PC
#2??? Mac --->? N3FJP running on Windows logging PC assigned to digital station which is connected to the shared database
Any "best practice" or would either work?
Thanks.
|
Re: N3FJP integrating with FLRig for non-digital uses
Hi Jeremy,
Thanks for your e-mail.? I've not heard of anyone creating the interface that you describe.? Thanks for considering taking on the project!
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 11, 2023 at 07:15:48 AM EDT, Jeremy Utley <jerutley@...> wrote:
Hello everyone!
For digital modes, I've gotten a good integration setup between FLRig, WSJT-X, Gridtracker, and ACLog - WSJT-X talks to FLRig for rig control, feeds data over to GridTracker, which triggers logging of contacts in ACLog.
However, I would like to also utilize FLRig for Rig Control for non-digital uses as well - so I'd like to see if anyone has built a tool that can act as a go-between from the FLRig XML-RPC server, and the ACLog API.
If there's not already something available, I might see if I can come up with something, as I do have some programming knowledge - but I don't want to re-invent the wheel if there's already something out there.
Thanks in advance!
Jeremy, NQ0M
|
Hi Dave,
Thanks for your e-mail.? I'm sorry that you are still having trouble.? I've already replied to your thread here:
I don't currently have any additional insights to add, but I will continue to try and duplicate what you are experiencing.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Monday, July 10, 2023 at 05:38:33 PM EDT, Dave Edwards <kd2e@...> wrote:
Hi Scott....
Can you suggest what to look at for this scenario?
I have an Icom 7610, and all is working, but...
When sending CW from messages in F registers using TSM,
The tab correctly sends the contents of F2, but
the return sends the contents of F3 after about a 3 second delay.
It all works, except for the delay.? The computer is pretty fast and
recent, so I
don't think its a matter of a slow cpu.? Hitting F3 sends the contents
immediately.
Thanks for any thoughts.
....Dave
|
N3FJP integrating with FLRig for non-digital uses
Hello everyone!
For digital modes, I've gotten a good integration setup between FLRig, WSJT-X, Gridtracker, and ACLog - WSJT-X talks to FLRig for rig control, feeds data over to GridTracker, which triggers logging of contacts in ACLog.
However, I would like to also utilize FLRig for Rig Control for non-digital uses as well - so I'd like to see if anyone has built a tool that can act as a go-between from the FLRig XML-RPC server, and the ACLog API.
If there's not already something available, I might see if I can come up with something, as I do have some programming knowledge - but I don't want to re-invent the wheel if there's already something out there.
Thanks in advance!
Jeremy, NQ0M
|
Hi Scott....
Can you suggest what to look at for this scenario?
I have an Icom 7610, and all is working, but...
When sending CW from messages in F registers using TSM,
The tab correctly sends the contents of F2, but
the return sends the contents of F3 after about a 3 second delay.
It all works, except for the delay.? The computer is pretty fast and recent, so I
don't think its a matter of a slow cpu.? Hitting F3 sends the contents immediately.
Thanks for any thoughts.
....Dave
|
Re: Visual Basic 6 API code snippets
Hi Patrick,
He is looking for the actual code snippets, not the compiled executable.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Monday, July 10, 2023 at 03:58:11 PM EDT, Patrick Dickey <patrick.c.dickey@...> wrote:
Would they be available on an older version of your site, by chance? If so, he could use the archive.org site to pull them up. ? Have a great day. ?
Patrick. ?
From: [email protected] < [email protected]> On Behalf Of Scott Davis via groups.io Sent: Monday, July 10, 2023 1:26 PM To: [email protected]Subject: Re: [N3FJPSoftwareUsers] Visual Basic 6 API code snippets ? Thanks for your e-mail.? I'm sorry, VB6 (which started all this and I loved) is now so far in the fossil record that I no longer have access to the code. I'm sorry that I didn't have the answer you were hoping for. 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... Hi there,
I am after the VB6 code snippets Scott mentions in the API section of the Help web pages.
Does anyone have VB6 code to send commands to the ACLog TCP server and receive data and process the output?
Any help would be appreciated.
Thanks a bunch. James (M7SWL) 73
|
Re: Error While Loading to QRZ - My Fault
Hi Gregg,
Thanks for your e-mail.? From AC Log's menu options, click Edit > Bulk Edit and modify your log as needed.? Station call used will be thee call currently in Settings > Setup.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Monday, July 10, 2023 at 03:18:57 PM EDT, Gregg Schulz <w9awx1@...> wrote:
So, I used the field day program and had our club station call sign in the call sign field but apparently it reverts back to my call sign as I’m the registered user of the program. Is there an easy way to change the ADI file data with the club’s call sign? Or do I just manually fix this.?
|
Re: Visual Basic 6 API code snippets
Would they be available on an older version of your site, by chance? If so, he could use the archive.org site to pull them up. ? Have a great day. ?
Patrick. ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Scott Davis via groups.io Sent: Monday, July 10, 2023 1:26 PM To: [email protected]Subject: Re: [N3FJPSoftwareUsers] Visual Basic 6 API code snippets ? Thanks for your e-mail.? I'm sorry, VB6 (which started all this and I loved) is now so far in the fossil record that I no longer have access to the code. I'm sorry that I didn't have the answer you were hoping for. 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... Hi there,
I am after the VB6 code snippets Scott mentions in the API section of the Help web pages.
Does anyone have VB6 code to send commands to the ACLog TCP server and receive data and process the output?
Any help would be appreciated.
Thanks a bunch. James (M7SWL) 73
|
Error While Loading to QRZ - My Fault
So, I used the field day program and had our club station call sign in the call sign field but apparently it reverts back to my call sign as I’m the registered user of the program. Is there an easy way to change the ADI file data with the club’s call sign? Or do I just manually fix this.?
|
Thomas
Gregg Schulz