开云体育

Okay thanks for the advices. 73 George /HP1GDS

Most can do GPS over Wifi or BT with no additional hardware required other than a smartphone and their Pi (or other computer). GPSD forwarder is a free Android app that makes it possible for Android

If the USB port is giving grief, why not ditch it and try something like serial over BT or WiFi? Here is a Serial to WiFi gadget built using an esp8266.

It's RF noise from the USB port...the 3.0 ports are much worse. Stick with the 2.0, use an extension USB cable for your GPS, or even better use your phone to stream it's GPS data with GPSD and no need

Hello, Any additional information about this issue? I have an external ssd hard drive, when connected to usb 3.0 my gps does not work. If i connect the same ssd hard drive to usb 2.0 gps work fine. I

Yep, been using Winlink Express for years on the Pi at this point..ever since Box86 became a viable option. As far as VarAC goes, there IS in an installation program too. I just run the installer

Hello! Similar to installing/updating VARA and VARA FM on a Raspi running Pi-OS and 73Linux, I installed Winlink Express, I think successfully.? Well, anyway, the program starts.? I still have to

I am not using Wayland.? I switched back to "X." Wayland was causing problems with my VNC and other things.? I still get a black Conky? rectangle on my Pi-OS after installing 73Linux.? I have

Good morning, I have watched a lot of your YouTube videos, but I need help with something I can't seem to find a good clear answer on. If my raspberry pi reboots it consistently changes the

Sir, I've been having similar problems with the PAT Script page not reading my frequency for VARA FM and Packet.? Jason had me perform delete commands for hamlib as he thought I might have two

Good morning, I am working on setting up Pat Winlink with ardop, and I have run into a few interesting issues. Firstly, when I installed the various applications, I have to wonder if I had some sort

Thank you for the feedback! Sent from [Proton Mail](https://proton.me/mail/home) for iOS

You probably should have only 1 igate and digipeater running at a time so pick out which one you want. If you want a GUI, then pick Xastir or YACC (YACC is much better than Xastir IMHO). If you want

Good day Do both Direwolf and xastir need inet access for the igate? or just direwolf?

I loaded BVM on a Pi4 and set it up? as a VHF packet and VARA FM RMS Gateway.? Working well so far. Brian K9KQA

I deleted the 4.5.4-1 libraries that show under load software in the repository. Packet worked a few times. Couldn’t get VARA to work so ran 73 Linux update 4.6 and now neither packet or VARA work.

Denis, the “exit on transmit” problem seems suspiciously like RFI. That would be something to look into. Yesterday, I also installed the BVM on a spare Pi 4 with 8 GB RAM, running Bookworm over

The Raspberry Pi 5 normally requires USB-C Power Delivery protocol ( *PD* ) to operate. The PD spec only requires 3A at 5 volts, but the RPi5 bends the rules, and requests 5A at 5.2V from the PD

I installed bvm on a 8GB PI5 and had good luck. Running VARA on WINE will exit on transmit on the PI OS. VARA runs great on bvm. I also tried APRSIS32 and Winlink, they work great. Need to do more

I just did some testing with the BVM. It is not bad at all. It does run decently. A couple of issues * I normally use xrdp to remote into my Pi's. ?I found it more stable than VNC, but with BVM