开云体育

installed with 73-Linux... does it support RPi 5? thanks Mark

Can you verify that pat is running? To see run this: systemctl status pat@$USER If it's running, you should see Active: active (running) If it's not, try: sudo systemctl restart pat@$USER -- 73, de

hi all, i get the following error when running pat------- Firefox can’t establish a connection to the server at 127.0.0.1:8080. Vara starts ok . system linux mint 21? thanks for any help given 73?

Did a rebuild to my Linum Mint laptop and ran the Linux 73 script to install a the programs I’m interested in. One of those was WSJT-X and it installed the RC3 version of the current version. Where

Thanks for the reply. I've messed around with buttons down there, but nothing seems to change anything. With windows, it's easy to control the audio levels (input & output) but I'm not finding where

FLDIGI has an output volume control on the bottom right of the screen if memory serves. [email protected]> wrote:

I'm new to 73Linux, and I'm having a hard time finding where to control the audio levels. I'm using a digirig mobile on a Kenwood tm-d710g, and the audio level is too high in fldigi where the diamond

I've been using one of these nice little home-brew charger/power switches: https://www.nf4rc.club/how-to-docs/battery-backup/power-switch-smart-charger/ The list of materials is here:

This might be the video you were looking for. If not Jason has a YouTube channel that has all of his videos. It's under KM4ACK https://www.youtube.com/@KM4ACK/search?query=battery%20monitor

Hello All, This isn't a Pi related question, but perhaps someone can assist. I saw a video by KM4ACK, I think it was in the past few months, where he had a 'gizmo' that he connected to his battery. He

I started 73Linux and wanted to de-install an app (not Chirp).? The script runs then hangs up. See attached screen shot.? Chirp starts and includes an error messsage.? See attached screen shot.?

Has this changed in the last 4+ years? I'm trying to connect to an RMS in the list and preceding the station ID with the digipeater ID. The software seems to be sending only the destination RMS, not

Can you add a screenshot?? Maybe someone can help based on that.

Okay thanks for the advices. 73 George /HP1GDS

Most can do GPS over Wifi or BT with no additional hardware required other than a smartphone and their Pi (or other computer). GPSD forwarder is a free Android app that makes it possible for Android

If the USB port is giving grief, why not ditch it and try something like serial over BT or WiFi? Here is a Serial to WiFi gadget built using an esp8266.

It's RF noise from the USB port...the 3.0 ports are much worse. Stick with the 2.0, use an extension USB cable for your GPS, or even better use your phone to stream it's GPS data with GPSD and no need

Hello, Any additional information about this issue? I have an external ssd hard drive, when connected to usb 3.0 my gps does not work. If i connect the same ssd hard drive to usb 2.0 gps work fine. I

Yep, been using Winlink Express for years on the Pi at this point..ever since Box86 became a viable option. As far as VarAC goes, there IS in an installation program too. I just run the installer

Hello! Similar to installing/updating VARA and VARA FM on a Raspi running Pi-OS and 73Linux, I installed Winlink Express, I think successfully.? Well, anyway, the program starts.? I still have to