开云体育

Good morning, I had created a video for my students and for my POTA Raspberry Pi. Here is the link to the video: https://youtu.be/9O52iSIt4jw If you are going to put 73Linux on it, I had the best

Don, I'm running the digirig interface kit.? It has me covered for everything.? Thank you for the assist though. KM6QAQ73

Thanks Jason, yes I remember now.? I think that Denis with digirig covered using the VOX setting.? I'll try it tonight and report my findings.? On another note, I updated 73 Linux on my pi 4 and

The TS 2000 has a 13 Kenwood Accesory plug where your audio only goes through. You will need a serial DB9 adapter to run your VFO. I assume that the Digirig has the db9 plug wire from the serial port

Have you had success with that, Jason? My PIs are still mostly on Buster but the two that I have Bookworm on, the hotpot doesn't automatically start. You can turn it on by logging in and turning it on

KM6QAQ and all: I realize that Jason is supporting mainly LM. LM does not run on th Rpi. Even if there was an arm version LM on the Pi, I don't thiink it would run (maybe on the 5) The pi can run

KM6QAQ and all: I realize that Jason is supporting mainly LM. LM does not run on th Rpi. Even if there was an arm version LM on 73, Jerry ---- Extra Ham Radio Operator: WF5W Registered Linux User:

My bad. You mentioned the FTM500 in the subject and my brain got stuck there. Assuming you have the TS2000 configured with FLRIG and PTT is working, set PTT in VARA FM to VOX. This basically tells

Hey Jerry! Bookworm has a built in access point on the Pi that should work. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Oh but in order to install you need a computer not a raspberry pi.? Jason is still supporting the pi effort but not to the extent that he is the LM effort. KM6QAQ73

Everyone is pretty much using Linux Mint. KM6QAQ73

So, it has been awhile since I did anything with a raspberry pi, but now I have a need. So, for 73 Linux, what op sys version should I use? Or rather what version I should stay away from? Jerry

It has been a while but I can't see the hotspot software on the list of software to install. So, I have a need of that on a raspberry pi. Anyone know what I should install instead? Jerry WF5W

Jason, If I set up PTT for CAT 9600 8 N 1 RTS my Kenwood TS-2000 with Digirig goes into transmit when I close that window.? I get it to stop transmitting by clicking TUNE in sound card.?? I

Hey Jason, I'm using a Kenwood TS-2000 and a digirig interface kit.? You covered mobile rigs in your video but didn't mention how to set up the software for base station or rigs with CAT control.?

I forgot to add that I am using an Anytone 5888uv and a digirig. I also noticed that the volume of the received packet coming from the UV-pro is lower than what is coming from the other radios

You won't be able to read the frequency for the FTM500 as it doesn't have CAT control. However, PTT can be accomplished. There are different methods depending on your sound card interface. Which

I’m setting up APRS on my laptop running Linux mint set up with 73 Linux. I’m using Direwolf and YAAC. It seems to decode everything except beacons from aprsdroid using a B-tech UV-pro with the

Trying to set up CAT controlled radio with VARA fm in Linux Mint. Do I use CAT setting in VARA or Comm?? It seems to be doing dual duty on with FLrig. Tried to disable FLrig (RIG control) in pat

I have been using this app as a replacement for the gpsd forwarder app. What is nice is you can set up multiple hosts you want to relay to with the option to turn off/on as needed the phone and