开云体育

Emanuele RE I decided to leave it alone, I give up. Don’t do that, the radio is 99.777% , just some strange thing left. It’s ok to take a break and let the brain cool down. I follow your

Put it aside but don't give up on it. How did you decide the IF frequency? When the IF has a crystal filter the crystal determines the exact IF frequency but when there is no crystal you just

Guys, I performed a complete RF alignment once again. I used a sig-gen and the SA just as a "receiver" to "see" the LO signal and followed the service manual instructions. LO was fine in all bands

Great and Useful site!! Thanks wa3gin [email protected]> wrote:

Happy Anniversary Paul Bowman KC3FVD

Happy Anniversary! ????? ? Joe Connor

Well believe it or not, its been 20 years, this site has been active and strong for Hallicrafters Radios. Started in 2005 as a lark, I am amazed that we now have 1,078 members. With thanks to all

Richard what does turning the dial clockwise actually mean? If it was a rotating pointer on a fixed scale it is fairly clear that the POINTER rotates CW. And the numbers stay fixed, but on a rotating

Emanuele, this is late. Your statement here seems to eliminate the idea that the BS setting is the problem. The other day while taking my truck tire off at a tire place, the hex part of the security

Thanks Pete. I appreciate the complement. I find it very gratifying that my work helps someone bring a piece of equipment back to life. It also provides me with the joyful option of bringing a

Emmanuel Oh I sent more cross-posting. Now back at square one ? Entropy is increasing quickly. So you are back to the apparent too-much capacitance or inductance, and similar problem for 4

Note that the direction of the dial and knob for bandspread are reversed. See instructions about replacing the dial string. The index mark on the dials is at the LOW end, with capacitors fully

Where its supposed to be I think. As far as your last post, I was looking for something like this. I was tempted to suggest getting rid of the high tech instruments and sticking to a regular

Richard you deleted my image in the reference so others might wonder about some stuff missing, but no real matter there. My thought to verify the bandspread is simply to turn the BS dial CW ? and

Richard, we do cross posted. Today I also started to think the band spread variable capacitor was stringed reversed.. But I checked it and, in fully clockwise position (the one indicated for

*Wait a minute guys ... SORRY guys!!!!!* Using the SA for RF alignment led me astray, .. and you all with me! Don, you say need education ... from my side I would say I need a medical treatment for

Which way is the band spread capacitor facing? Capacitance should be minimum with dial at zero. This is Halicrafters design, on non-calibrated band spreads the dial indicates the amount of

Emanuele I NEED EDUCATION on reading these new scopes and such Wrt your previous post; I have no reason to believe there is a problem in the IF. My last post made wrong assumptions on the

Hy. I can confirm that the dummy antenna is not influencing the peaks points. I tried the tests just getting the TG output physically close to the antenna connector and nothing changed but the

HAHA, WellPete, thanks for your thoughts. You sound a bit sour this morning. Cheer up, it's Terrific Thursday. I've had great luck with reproduction from the Internet. Print and photo quality is