开云体育

Thank you very much to all of you for your suggestions. I preferred option 2: craft the tool my self. *Paul* : I suppose you misread my first statement: it is the last " task " in a project, no the

This set should work for you.

For what it may, or may not, assist... I pulled my late SX-99 off the shelf to see the IF cans. They are slot, vice hex tuning slugs. I then looked through about 100 tuning tools from Xcelite, GC,

Emanuele, The last project, wow. ?I still have about 9 Hallicrafters on the shelf waiting for the dust to be blown off. One is a SX-99 so I may have to also make a tuning tool. ?I’ve had to make

Emanuele look at this at least to get an idea of what was used back then in North America https://www.radiodaze.com/alignment-tool-kit-item-tl-align1/ One of these might fit Are you

Yes, they are modern stuff.. what i miss are the old tools.. so the question is: what are the slot measures of the Hallicrafters IF cans (p/n 050-30024[2,3]) old cores? (this picture, showing the

Emanuele, about when did you buy these tools? Likely these are more recent ones made for newer, smaller cores. I recall looking into cores a year ago and there are many shapes and sizes now. The

I am approaching the last task in my S-85 refurbish project: Alignment. For those IF cans I cannot find the right tool mechanically match those cores' slot: it is too long and too large. I own these

I now own an SX-42 I seem to be getting quite a collection here...... SX-9, S-19R, S-38C, 5R10, SX-100, SX-43? . Anyway, everything is working, BUT the FM is "funky". Aside from it being quite

This is a real long shot. I need a T3 for the HT46, part# 050-002146. It is the 15-meter transformer. AND DO YOU WANT TO HAVE FUN. I got the transformer out. I did it with a long break between each

Bruce, Thanks for additional info. ?I will verify I only have DC there.

Crap! 12SK7…. [email protected]> wrote:

The small capacitor on the screen node of the 12SK87 is to insure there is no AC ripple or any RF on the screen. There should only be DC here.

Richard and Don, Thank you for the info and help with my project. 73 Barry W4LSV

Thanks to everyone who replied to my plea.? I have secured the solution.

Skip - I don't mess with the relays.? I use a Johnson T/R switch - all electronic switching - and it works perfectly.? The B&W T/R switch also works well in this application. 73, Floyd - K8AC

Markus, I have several different sizes of the cord pulley. These are Hallicrafters spare parts. If you could send me the diameter, and the thickness I may be able to match it. Walt Cates,

Markus, I don't have an extra SX-62, but I do have a metal lathe and could turn the pulley and its shaft without much trouble. If you don't get any bites for the whole assembly, let me

Hello. I am in need of a mechanical part for my SX-62B. The dial pointer travels on it and the whole unit moves side to side to allow for the dial pointer reset. Mine is pictured below and as you can

I take the point about the wattage. I will go to a 10W resistor in the appropriate resistance.