开云体育

On Sun, Apr 13, 2025 at 06:52 PM, Jim Bachesta wrote: > > My hand controller is displaying a solid white screen, with no text or > images. I am running Gemini-2 with version 6.12. These are the

Thanks Chip and Paul, It looks like I'm going to get some clear weather for the next couple of nights.? I'll upgrade to Level 6.12, reset the HGM to defaults, double check revesal check boxes on

So many things can go wrong, for sure it is always good to be able to swap HC and mainboard for faster diagnostics. Thinking about this, the simplest way to produce this symptom (HC tries to connect

On Sun, Apr 20, 2025 at 09:14 AM, Mtn Goat wrote: > > > The ability to operate Gemini via Ethernet does not prove the Gemini is > good. The buffer circuit in Gemini for the HC could still be bad. >

Mike, I think you should try to upgrade to the latest firmware and then, reset to defaults, like Chip suggested. There was nothing that I’m aware of in 6.02 or later releases that should affect DEC

The ability to operate Gemini via Ethernet does not prove the Gemini is good. The buffer circuit in Gemini for the HC could still be bad. Helpful if someone could loan their HC to Jay for testing

On Sun, Apr 20, 2025 at 06:26 AM, Jay Freeman wrote: > > In January I retrofitted my old G-11 to Gemini 2. The Gemini 2 worked the > first two times I had it out but tonight it failed during

Hi Mike, I know there was a way to reverse the direction of travel in L5.x through the web server UI but it must not have been an option visible in the HC until L6.x.? AFAIK users have always been

Paul, I checked the setting of the boxes when and they were not checked.? At the moment the scope is not setup due to weather, so any additional analysis of the issues will have to wait.? One note,

Jay, It looks as if the bootloader has difficulties to access the SD card and delays the startup of the main board, while the HC is waiting and trying to communicate again and again. If your board

In January I retrofitted my old G-11 to Gemini 2. The Gemini 2 worked the first two times I had it out but tonight it failed during startup. It made it past recognizing the (Losmandy's) GPS unit but

G'morning, After building a model and setting limits last wknd., I was able to get some observing in last night. My Goto's were putting my object in the FOV of an 8mm/122x eyepiece. Although not quite

T the version is correct, but it sounds like you may have some installation issues if the program crashes when switching to the debug tab. Can you try doing a complete uninstall and then reinstall?

Try a HGM reset.to defaults?? There was a weird with the direction commands too.? Someone else had something like this. -- Chip Louie Chief Daydreamer Imagination Hardware Astrospheric - South

Did you uncheck the direction reversal settings under mount gearing page on the HC?

Chip, Thanks for the suggestions, I did use GFU to do the firmware updates for the main unit and the hand controller.? I will continue to troubleshoot this issue and if I determine the issue, I will

Hi Michael, It's odd that PEC is not working. The L6.12 release was specifically reworked to correct a PEC weirdness and I'm sure Rene has tested it carefully.? So your gear choices likely have

Paul, I show under the Help tab the revision as: nVision V5.42.0.0 At step one, the link requested user information and the device as "ulink2".? After filling this out, their system sent the file

Hi Doug, Check the settings I mentioned here: /g/Gemini-II/message/28533 You can try to update the components by selecting Reload Software packs. What version of Keil uVision do you

Thanks Chip. I suspect that if you were working with Level 6.11, it will still work for Level 6.12.? The issue I'm having manifest itself on any firmware version greater than L6.00. Appreciated the