开云体育

On Mon, Apr 21, 2025 at 06:35 PM, Jay Freeman wrote: > > Update on my problem: I called Losmandy and spoke to Tanya; she said that > about half a dozen new Gemini-2 units had made it out the door

Hi Michael, Glad to hear you got your guiding working again. What I find strange is that you are reporting that up arrow on the Gemini.NET virtual HC is sending guide South command -- the only way

I'm sure Paul has.some ideas why this is happening but I'm fresh out of ideas.? Something is flipped or flipping, I don't know all the places it could be altered but at least we have some change

Chip and Paul, Last night I was able to upgrade to Level 6.12.? I performed the HGM reset after this upgrade.? Eventually, I was able to get the guiding to work but I had to alter the guiding

Update on my problem: I called Losmandy and spoke to Tanya; she said that about half a dozen new Gemini-2 units had made it out the door with an SD card installed in the Gemini-2 box that was too

Typo in my last, fixed below -- net address should have read "192.168.0.111". -- Jay Reynolds Freeman --------------------- Jay_Reynolds_Freeman@... http://JayReynoldsFreeman.com (personal web

Continuing my report ... Summary: It has gotten worse, now the problem seems to be intermittant ... :-( This morning, I set up the hand controller and Gemini-2 box as before, and again connected to

Paul, This just shows how important it is to ask for advice.? Thinking about this as a system issue, I pulled out a defunct Windows 10 Surface Tablet {one last act of Service from the thing} and

I don’t see why not.

Sounds like a problem with the ULink2 USB device/adapter. If you're seeing the driver show up in driver manager, then the device is being detected but apparently not able to connect to uVision. What

Paul, It looks correct on the first panel.? On the second panel this displays as last shown.? Set to 100 KHz but no ULINK2 can be found. I'm reasonably confident then it's a ULINK2 issue but I've

Doug, On the Debug tab, make sure you have ULink2 device selected next to Use: radio button and that Use Simulator is unchecked: Then, click Settings next to the drop-down list. Make sure the clock

Paul, I used Windows uninstall of the Kiel software and reinstalled the package prior to sending the first note.? However, with the suggestion to repeat I found an issue occurred by my using the

Hmm, From your initial post it sounds like you bought one of the two available Gemini 2 mini upgrades. If this is a new purchase from Losmandy stop and call Losmandy, let them handle diagnosis and

In SkySafari you can specify the precession epoch: in the Settings menu choose Precession, checking "Use Current Epoch" sets it to JNow, otherwise you can specify the epoch (2000 for

Thanks Paul. I can get J2000 coordinates from my Starry Night Pro.? I've been to Didier's page on Catalogs and found some I'd like to add to Gem. His directions for loading them sound easy, I like

Sounds like a good plan, Jay. If you have a 2-4GB micro-SD card on hand, I'd format it with FAT and then try replacing the card in the Gemini CPU with it. That should be good enough to get Gemini to

Hi Kevin, Gemini is using J2000 coordinates for catalog entries. Sounds like SkySafari gives you JNow coordinates, precessed to epoch of date instead of J2000.

Summary: NO FIX. Reporting test and debugging actions taken: 1) Put hand controller and Gemini 2 box on the bench at home, connected them, supplied power, and verified that problem still existed,

While using Sky Safari to track down SAO Numbers to add to my Double Star list, so I can use Gemini HC SAO catalog, I found that Sky Safari uses RA(2025.3)/Dec(2025.3). Searching for Beta Mon, I