开云体育

Try a reset

Where can I see the display itself for this case? --John, KK4QFP--

Hello, I am having a problem in getting My FT-857D to release itself from Split Frequency operation. I have followed the instructions regarding the function key and the split programfunction but have

You can see pics of the case here. I ordered mine in Black: https://www.thingiverse.com/thing:3229807 https://www.thingiverse.com/thing:3229807

Is it not in the case in the photos? RC WH6FQE

I bought the display from Chris Day ZL1CVD. I highly recommend it. The display was very easy to connect and get going. The screen is bright and colorful. I also bought the 3D printed case for it from

A tram runs on track much like a train. It has 1 power pole up to a single wire catenary with the other side of the power circuit using the rails as ground return back to the power house. A trolley

Jim, The window mount that accepts a rubber duck would be all right, but not for HF. I want to be able to pull my car into my garage, and any antenna that's going to be more than 18" higher than the

Hi Buzz, Sorry, I confused the issue with the wrong nomenclature. It is the ATAS 120 system, not the AT-140 as I put in my post. Should have verified before I put out the post....argh! Thanks, I'll

The best placement for a mobile antenna (if height clearance is not a problem for you) is the top center of the vehicle roof. It’s worth experimenting with a mag mount, before trying a more

Joe, Do you already have the AT-140 antenna tuner? If so, what antenna to you have? I have the ATAS 120 in my silverado connected to my FT-891. I had my FT-857 until a couple of months ago. The

I added a trailer hitch to my Subaru Outback with a removable extension so it will clear the hatch & mounted a motorized antenna to it. Works quite well. Only have to watch out when backing up! If you

3 possible options;? 1) MFJ widow mount for rubber ducky or small whip, 2) I have used a lip mount that catches the very top edge of the rear hatch, and 3) I have added a light duty hitch and mounted

Attach? your motorized antenna to a pedestal mounted on a piece of metal bar stock attached to the frame under the rear of the vehicle or put a trailer hitch on the rear of the vehicle and attach to

For those who have the 3.5" external display here is a cheap case for it: https://www.thingiverse.com/thing:3229807 https://www.thingiverse.com/thing:3229807 I ordered mine in ABS Black. Cost was

Not sure where I could mount this antenna. None of the antennas I currently have will work with this vehicle. I don't want to use a mag-mount antenna. Through the glass antennas on the side windows of

Incorrect. 897d included it. 857d didn't. -- Leonard K. Pennock (AD7AS)

Paul, Thanks for the advice. It sounds easy enough to swap out. Tracking shows it will be delivered on Monday, so I guess I will find out then. As for linears, I do not use them at all anymore. I

So it appears if you have the “D” model 857 that the part should already be there, correct? ?William N5WOI.

I fitted the Yaesu TCXO-9. The fitting was easy, it just plugs in. You have to unplug the old unit and replace it with the new unit. Be careful to plug it in the correct way round. You must remove all