开云体育

Just follow the instructions in the manual and you will be fine ____________________________________________________________ Eat This And 'Never Forget' A Single Thing Again clearstateofmind.com

I didn't see the photo you mentioned. I finally decided to try 2-meter SSB last night for the first time. I have had the 857D for almost a year and a half, but never realized it could do SSB on VHF. I

https://www.youtube.com/watch?v=HiOlburBnKw https://www.youtube.com/watch?v=HiOlburBnKw See the light in operation... Paul G4IJL

green is normal. turns blue when you have the cw sgnal tuned in . ____________________________________________________________ What Popcorn Really Does To Your Memory clearstateofmind.com

I replaced the IF filters in my 857. The TX Busy light used to flicked yellow when setting mode to CW and receiving CW, now it shows constant green. I can do with some advice on what normal behavior

Here are the pages for the MH59A8J Remote Microphone.I have never seen the back light on my keypad any other color than orange.?(With the exception of the light beside the AF/Sel/Dial button. That is

Do they change when you change the display colour? I can’t check mine now because it is packed (change of QTH!), but it might be worth a try.. Regards Rex G0CLR Sent: 27 March 2019 19:10 To:

I have no idea, I've never seen the green buttons. I went back through the FT-857D manual as well as the MH-59 manual and tech sheet. I couldn't find anything on changing the color of the keys or why

did you turn the lock on the mic on by accident?

What optional mics do you have? If they are MH-59, are you sure you have menu# 59 set to RMT? 73, --Hank KB4MTO / TA5ZC https://www.hamradio.hanklambert.com

On Tue, 26 Mar 2019 09:33:06 +0000 (UTC) "chuck tobias cltoby600@... [FT-857]" <FT-857@...> wrote:

The buttons were green before I programmed the new repeater into the rig. I did not program the buttons on the mike.

The red background light on the mic buttons is normal. Was it not red before? I know some microphones have a light switch to turn it on or off, such as the MH-48A6J. But I believe the MH-59A8J doesn't

I have a Yaesu MH-59A8J on my 857D and recently added and program a new repeater into my radio and now the my buttons on my mic are red. I have checked it and the radio is not locked what would cause

Have you checked the short cable from the head to the main body?? Make up another one if you can or borrow one to see if the problem clears up.? K3CLT Chuck Tobias

I would be interested results when using a different power supply?

Hi Mitch, thanks for your reply. The mystery tightens. I called Yaesu tech support today and they suggested to reconnect the original microphone to the radio, instead of my Heil Pro 7 headset, no dice

Hi Stefano, That kind of behavior would lead me to think it is a bad solder joint somewhere because of the rig having to "warm up". The question would be where. You might could isolate it to a area