开云体育

No reply for 48+ hours. I hope he is well.

What does the voltmeter on the rig’s display read, key up and key down? The point is to make sure there’s not an excessive voltage drop in the power supply connections or cable. -Les W6VN

Radio works FB.? When I push the SELECT button, the? MHZ Freq should flash, then change Freq by rotating knob. Press again, and KHz will Flash, change Freq by rotating Knob. The Rotation of control

Good try Marco, You have to have good eye sight and a steady hand to tackle this repair. I purchased a replacement screen, still a bit of soldering and it was a success. 73 Wayne VK2DWP. Sent: Sunday,

I have an Alinco supply set at 13.5v, it feeds right to radio. It doesn’t flinch when I key up. Doug

Got the tuner set to swr of 1:1, crank up to 100w RF output and hit the CW tone and the meter registers about 85W out, negligible reflected power. Any ideas why it’s not 95-100W. When I tune at 15w,

These belong to Bob Perry W%CL. His email is W5CL@.... [email protected]> wrote: -- J.D. Barron

Great idea, thx Bob! 73 Doug

Good thinking, congrats, I have that antenna, and I love it. Once you find the settings for each band, write them down, I call it my cheat sheet, makes tuning next time much easier.73 BobSent from my

Glad you found it. -- Leonard K. Pennock (AD7AS)

Thx Leonard, nope that wasn’t it. Found it tonight - wasn’t the radio. My feed line was close to 60’ - this is too close to the quarter wave dipole I had up (130’) . I added 20’ to the

Sure you don't have the antenna connections reversed on the tuner? Only having reflected power usually indicates they are reversed. -- Leonard K. Pennock (AD7AS)

Hi J.D. I may be interested in a nice FT857 depending on cost. I'll be taking my Tech and General exams in Feb. I can easily pass the online practice exams so I'm ready. I want something that I can

Hi, I’ve just set up a doublet with ladder line to a MFJ Versa III Tuner to my 857D. I’ve adjusted the tuner to the “loudest sound”, about S7 on 20M. Next step is to transmit on low power and

Sorry about that guys, yes link is wrong should have been www www.ve2dx.com ( http://Www.ve2dx.com ) still working on the yaesu stuff, been busy and forgot to hit follow! 73 richard -- 73 Richard

Hello, I got 5 zebra stripes too. Today I opened the radio and by the way of SMD technic, using a small soldering iron and flux liquid, I refreshed as in a picture above is indicated in a square red

try: https://ve2dx.com/ 73 Roy w6reh

Fake News??

Where is all the 857 stuff?

If you click on the link, it adds the Group IO info in front of the URL. You must delete everything before the www. 73, --Hank KB4MTO / TA5ZC Sent: Thursday, January 7, 2021 9:25 AM To: