开云体育

Maybe this, it shows 897D, but 857D is the same, its what I had to do to my 857D when I popped the cat power fuse when I connected to a wrong tuner. Also makes changing the fuse if ever needed in the

Which tuner and how was it blown? Mike / KA4CDN

Hi. New member here. I'm using my FT-857D with a MFJ-939 auto tuner. It had been working great since Nov 2019 but yesterday I had a problem where it wasn't tuning. I'm trying to diagnose the problem.

What about the power settings in the service menu?

The 1/2 inch is between the radio top/bottom and the bracket. Buzz KD4CXI

All, Thanks for the reply's and information and yes I did search the Web and found all the major dealers out of stock. Just to be clear this is not a life and or death have to have I made my own

Over the years, I have made several brackets for different radios by bending proper sized, 1/8 “ thick aluminum plate into a U shape. Then drilled mounting holes to accommodate the radio and

Take a look at a universal CB/Ham radio mount. Here are a couple from Amazon UK:

Did you try calling yaesu? -- Leonard K. Pennock (AD7AS)

Bad luck. I cannot find new stock. It looks like an appeal on here is the only chance. Maybe someone has a ruined radio and still has the accessories? Good hunting.

And both links say "Out of stock"

https://www.radioworld.co.uk/yaesu-mmb-82-ft-857d-mobile-mounting-bracket https://www.gigaparts.com/mmb-82-mobile-mounting-bracket-for-ft-857.html I did a Duck-Duck-Go web search (I hate Google). Did

I could spare one if no one is closer to you. I’ve got 3 857Ds and haven’t used the brackets. 73 de Daniel N0BN Daniel Hazen N0BN lostpark3@...

Mike Let me know if you don’t find one…I may have one but need to look for it use email w4grj@... Jack W4GRJ Sent: Saturday, January 16, 2021 8:32 AM To: [email protected] Subject: Re:

I am looking for the mobile mounting bracket for an FT-857 I purchased a used one from a guy who said it was complete in the original box but as they say close but no cigar, the radio is in good

I wish to sell a Yaesu Ft-857...it is in great working order...the unit is excess to my needs... EdW4EMM

Thanks Jim, ya I’m not going to fuss with it any more. Given the variations in the airwaves what’s a few watts anyway. 73 Doug

I have seen many answers that are commonly suggested. There is a possibility the ceramic filters are beginning to corrode. Normally if they are a problem the complaint is static in the receiver even

I’m looking to make use of an ‘old’ Icom tuner that’s been in my junk box for a number of years to put up a horizontal loop on my small plot. Although the tuner works fine with a rigged tune

OK thx, voltage looks good. Will start trying some DX to see how it’s performing. Doug