开云体育

I am still struggling to process the fact that Lynn is no longer with us. I had the distinct pleasure of meeting Lynn (and Paul) several times when we worked bike ride events near Orlando over quite a few years. I was both astonished and honored that he remembered me each time we saw each other. I was particularly surprised when he APRS messaged me out of the blue one time when he must have realized I was actively mobile. Lynn was remarkable. He was the nicest guy you'd ever want to meet. His passing profoundly saddened me. We all miss him. In early December, I was having a small issue with the software. I was literally getting ready to put a message on here with the hope that Lynn would respond with words of wisdom as he always did, when word of his untimely passing struck. I've been so dismayed that I haven't gotten around to putting that message on here until now to see if one of the other clever folks here might have an answer. I run the software on several computers - they're all a little different since they serve different purposes. One of my instances of the software always starts with the "View" set to "None" and the map tile selection set to one other than the "Original" one. At some point, I must have selected those options (although I don't know why I'd select "None" for the "View"), but they have somehow become somewhat permanent. I have to change them at every start. I suspect that information is stored in the XML file somewhere, but I can't find where that might be. I know just enough about the XML file to be dangerous, and I've searched for every version of character strings I could think of that might be used. Long ago, I thought I was told that if you ended the program in a less-than-full window, the XML file would store all the current parameters so that it would open again as you left it when you closed it. I've tried that, but it doesn't seem to work, so maybe I misunderstood that situation. So, does anyone happen to know where or how those two parameters (selections for "View" and "Screen/Tile set") are stored so I can change them? I have no problem editing the XML file as long as I know what I'm looking for (and I do make a copy of the current working file before I start tinkering...). Thanks. Gil Chapin, WB2UTI

Hi All, I am trying to get my Kenwood D710 to Digipeat. When looking at the D710 port log, I get the following: WinMain:2025-01-12T18:11:34.370 DigiPeating Not Supported on KWD710(Pkt) Protocol Ports Any ideas of what is going on? I am using the built in D710 TNC. Thank you Facundo

I've been trying my best to keep APRS Foundation-related activity confined to our new group on 开云体育 (/g/aprsfoundation); occasionally, we encounter information and news important enough to warrant wider distribution. That said - I have some exciting news to share... I did some sleuthing with Paul, Lynn's son(KJ4ERJ—SK), to determine where Lynn hosted ANSRVR. We found it! To make a long story short, ANSRVR officially moved to a new server yesterday morning. For you IT propeller heads (like myself), some details about the server: OS: Windows Server 2022 Datacenter vCPU: 2 Memory: 4 GB Storage: 100 GB NVMe SSD Location: Chicago, IL Thanks so much! 73 for now! -JeffH

Good afternoon. You may have seen the posts from Glen, KB0RPJ. Our ARES group was exercising APRS group messaging during our Blizzard Warning. I am working on an instructional document for APRS including: Winlink pending mail notification SMS texting Group messaging Are there features beyond these 3 to include? I am not being exhaustive (such as instructions for send/receiving WINLINK via APRS). Just trying to get operators to expand their APRS functionality & use. I would be interested in reviews of the attachment for accuracy & clarity. Thank you. Joe

Please let me know if you are in the Orlando-Palm Bay area and would like some APRS equipment. I will give priority to new hams. https://drive.google.com/drive/folders/1DukTQobFm1UH1p7Ub7u0pHoij-GIMOa8 Paul

Is there a way to just beacon objects & not your callsign? I am currently just using the app on my pc. No radio hooked up. I mainly wanted to beacon an object to the maps. The repeater here & some information in the beacon txt. But when I beacon the object 145.330- my callsign is next to it. So it makes it harder to see unless you zoom way in. For now ive just separated some distance from the object & my callsign. But I was curious if there was a way to just omit the callsign. Especially since I'm not doing direct RF. Or is what I'm doing about the only thing to do?

I am able to join a group "LIVCO" however, i am not getting any messages from the group, and when i send a message to the group it sticks on pending

if anyone is still getting the prompt message about looking into the new version to upgrade the program, it was painless and worked great.... kind regards, Brad Ko6kL

Good afternoon. I was setting up a digi based on a RPI and was curious what the standard is for specifying the antenna gain as part of the PHG. Is it Dbi or Dbd? Thanks and 73, Tim KB2MFS

I am trying to be good newbie so any help would be appreciated. Is there a document that shows the proper configuration to play nice with others I thought I set beaconing to every 10 min but find after that it starts transmitting and continues for quite some time beaconing my-call-->wide1-1->APWW11 . is there other settings I need to address so as to not tie up the frequency Any help is appreciated TIA Rob - KD1JG

Would you send me the email of any new hams that you know that would receive free ham gear from KJ4ERJ SK? I received many pieces of equipment from living hams and would like to pass on the tradition, but finding those who don't have everything yet is nearly impossible. This can also include you or not-so-new hams, I am not particular, if you are interested, reply to me directly. Please don't click reply (to the list). Paul KJ4DXK@...

What are your thoughts about publishing APRS IS MO and APRS IS 32 source code on github with an opensource protective license? Paul Son of KJ4ERJ

Dear all I am using IC9700 radio with Gpredict with rig control for APRS decoding in ISS satellite passes. I am using UISS software and UZ7HO sound modem. Also using APRSE32 software. In the sound modem settings, I am using usb audio codec as input device and output device. When I send a text message my message is not decoded and not hearing my tx signals. But I am getting rx . I have checked the radio settings and uiss settings and sound modem settings with one of my friends whose signals are decoded. I could not find any issue. Can anyone suggest a solution. Regards Balu VU2RTF

I meant Lynn not Steve! Many APRS authors over the years. I started with winaprs, then uiview, then xastir, now aprsis32. i never used the wb4apr client.

I have been asked by Paul Deffenbaugh KJ4DXK our new group owner and taking over from a highly regarded friend Lynn KJ4ERJ SK to repost daily the family request in the memory of their Late Husband and father to a worthy cause. I am including with Paul's original post an additional link link for and labelled single donation button, this is below and plain to see. We owe Lynn an enormous amount of thanks and gratitude for the work he put into APRS, I would also point out that Lynn Deffenbaugh KJ4ERJ SK was active in many other reflectors. If anyone in those reflectors requires any further additional information, Please let me field them on Behalf of Paul and his family until the right time comes. We have new members joining all the time, and I know some will hear this sad news and Family request for the very first time, to that end, I make no apologies for repeating this message, On Fri, Dec 6, 2024 at 3:45 PM P D via groups.io <kj4dxk@...> wrote: With heavy hearts, we invite you to pray for the repose of Lynn's soul. He passed suddenly and unexpectedly at home on Monday, Dec. 2. We invite you to join us on Tuesday, Dec. 10 at Our Lady of Grace Parish in Palm Bay, FL at 9am for refreshments and sharing, 11am Mass of Christian Burial, followed by the burial at St. Joseph cemetery in Palm Bay. Donations to the St. Vincent de Paul Society https://ourladyofgracechurch.com/st-vincent-de-paul/ in his honor or potted flowers are appreciated at the church on Tuesday. morning. Please share this. As the donation link above failed to work for me, (Probably because of me) here is the second link, This one definately works! You should see a one-time button here: https://secure.givelively.org/donate/diocesan-council-of-orlando/svdp-help-us-help-others Please don't feel compelled to give. Even $3 sends your meaning. Paul 73 for and on behalf of the Deffenbaugh family Steve, KF6WAX, Group Admin/ Moderator/ and feeling broken,

I have been asked by Paul Deffenbaugh KJ4DXK our new group owner and taking over from a highly regarded friend Lynn KJ4ERJ SK to repost daily the family request in the memory of their Late Husband and father to a worthy cause. I am including with Paul's original post an additional link link for and labelled single donation button, this is below and plain to see. We owe Lynn an enormous amount of thanks and gratitude for the work he put into APRS, I would also point out that Lynn Deffenbaugh KJ4ERJ SK was active in many other reflectors. If anyone in those reflectors requires any further additional information, Please let me field them on Behalf of Paul and his family until the right time comes. We have new members joining all the time, and I know some will hear this sad news and Family request for the very first time, to that end, I make no apologies for repeating this message, On Fri, Dec 6, 2024 at 3:45 PM P D via groups.io <kj4dxk@...> wrote: With heavy hearts, we invite you to pray for the repose of Lynn's soul. He passed suddenly and unexpectedly at home on Monday, Dec. 2. We invite you to join us on Tuesday, Dec. 10 at Our Lady of Grace Parish in Palm Bay, FL at 9am for refreshments and sharing, 11am Mass of Christian Burial, followed by the burial at St. Joseph cemetery in Palm Bay. Donations to the St. Vincent de Paul Society https://ourladyofgracechurch.com/st-vincent-de-paul/ in his honor or potted flowers are appreciated at the church on Tuesday. morning. Please share this. As the donation link above failed to work for me, (Probably because of me) here is the second link, This one definately works! You should see a one-time button here: https://secure.givelively.org/donate/diocesan-council-of-orlando/svdp-help-us-help-others Please don't feel compelled to give. Even $3 sends your meaning. Paul 73 for and on behalf of the Deffenbaugh family Steve, KF6WAX, Group Admin/ Moderator/ and feeling broken,

I have been asked by Paul Deffenbaugh KJ4DXK our new group owner and taking over from a highly regarded friend Lynn KJ4ERJ SK to repost daily the family request in the memory of their Late Husband and father to a worthy cause. I am including with Paul's original post an additional link link for and labelled single donation button, this is below and plain to see. We owe Lynn an enormous amount of thanks and gratitude for the work he put into APRS, I would also point out that Lynn Deffenbaugh KJ4ERJ SK was active in many other reflectors. If anyone in those reflectors requires any further additional information, Please let me field them on Behalf of Paul and his family until the right time comes. We have new members joining all the time, and I know some will hear this sad news and Family request for the very first time, to that end, I make no apologies for repeating this message, On Fri, Dec 6, 2024 at 3:45 PM P D via groups.io <kj4dxk@...> wrote: With heavy hearts, we invite you to pray for the repose of Lynn's soul. He passed suddenly and unexpectedly at home on Monday, Dec. 2. We invite you to join us on Tuesday, Dec. 10 at Our Lady of Grace Parish in Palm Bay, FL at 9am for refreshments and sharing, 11am Mass of Christian Burial, followed by the burial at St. Joseph cemetery in Palm Bay. Donations to the St. Vincent de Paul Society https://ourladyofgracechurch.com/st-vincent-de-paul/ in his honor or potted flowers are appreciated at the church on Tuesday. morning. Please share this. As the donation link above failed to work for me, (Probably because of me) here is the second link, This one definately works! You should see a one-time button here: https://secure.givelively.org/donate/diocesan-council-of-orlando/svdp-help-us-help-others Please don't feel compelled to give. Even $3 sends your meaning. Paul 73 for and on behalf of the Deffenbaugh family Steve, KF6WAX, Group Admin/ Moderator/ and feeling broken,