Re: Helps to understand colors and transmit
Hi, thanks, I found everything I needed
Thanks to you
|
Re: Helps to understand colors and transmit
Normally, I *believe* that means that the message has not been successfully sent (by whatever method is chosen). If the message is sent successfully it will turn green.?
Eric K0LGE?
Thank you for answering
1: I understood the colors of the messages and also the option to choose how I want to transmit
I have another question:
#: On the right side of the window where it says DSBL, this line is now green but changes color, what does this color mean?
#: On the left side you can see the stations and they are also colored, what does it mean? Or where can I look?
Thank you
?
|
Re: Helps to understand colors and transmit
Thank you for answering
1: I understood the colors of the messages and also the option to choose how I want to transmit
I have another question:
#: On the right side of the window where it says DSBL, this line is now green but changes color, what does this color mean?
#: On the left side you can see the stations and they are also colored, what does it mean? Or where can I look?
Thank you
?
|
On Wednesday, March 5, 2025 at 11:55:25 PM EST, scott.kemler via groups.io <scott.kemler@...> wrote:
I need passcode for APRSISCE/32
I am Scott Kemler AE0ZP
Sent from Proton Mail Android
|
Great! Glad I could help and you are off and runnign!
Enjoy!
On Sunday, March 9, 2025 at 12:22:42 PM EDT, Don Wolfe via groups.io <w4gcw@...> wrote:
Good morning Robert, ? SUCCESS!! I never gave any consideration to the green LED like I should have, that was a very big clue and I missed it. Once I changed the configuration of AMODE and ABAUD everything fell into place and starting working. I was testing using W4GCW-8 so if you look at it on the APRS map you'll see where I went around the block. ? You've been very helpful and I really appreciate your efforts.
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
On Saturday, March 8, 2025 at 10:56:21 PM EST, Rob Giuliano via groups.io <kb8rco@...> wrote:
First question would be: Does the Green LED flash for some time, then go solid? ? If not, then the TT4 is not getting the GPS data.
Are you using a splitter that allows both computer and GPS? ?? The Byonics splitter has a port for the computer and one for the GPS with proper connectors.
?? Without a splitter, you must configure AMODE and ABAUD must be set to the GPS configuration. ?? BMODE and BBAUD won't matter without the splitter ???
NOTE:? The TT4 always starts out at 19200 baud and after initialization, changes to the ABAUD and AMODE settings.? This means you can still make settings change on PORT A, even if it is set to GPS.
If that isn't it, you need to provide more details: ?? What firmware is in the TT4? ?? Explain you connections to GPS and radio ?? Post your settings and we can review them to provide more comments.
On Saturday, March 8, 2025 at 04:08:54 PM EST, Don Wolfe via groups.io <w4gcw@...> wrote:
I'm trying to resururrect? my old TT4 and need some help. All I'm using is the tracker with a gps antenna, do I need to program two ports or just one? I have it configured to what seemed correct to me but when I install it in the car it doesn't track. The TT3 I've been using tracks fine so I'm guessing the gps antenna is good. Any suggestions would be very much appreciated.
73, Don? W4GCW /? WQAI774 EL98pf
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
|
Re: Helps to understand colors and transmit
http://aprsisce.wikidot.com/message-notifier
When sending a message, on the lower left there are some checkboxes to let you select paths.
Adam
Kc2ant
-------- Original Message -------- On 3/9/25 12:42 PM, EA4HRV via groups.io wrote: Hi guys
I need your help
My equipment:
Kenwood TH-D75
My program:APRSIS32 Built:2020/05/01 21:21
#:I wanted to know what the colors mean? (Is there a page to see what it is or how to use it???)
#: When I send a message I only see that it is through the internet, is there some configuration so that it transmits with the power of the equipment??
Thanks
|
Helps to understand colors and transmit
Hi guys
I need your help
My equipment:
Kenwood TH-D75
My program:APRSIS32 Built:2020/05/01 21:21
#:I wanted to know what the colors mean? (Is there a page to see what it is or how to use it???)
#: When I send a message I only see that it is through the internet, is there some configuration so that it transmits with the power of the equipment??
Thanks
|
Good morning Robert, ? SUCCESS!! I never gave any consideration to the green LED like I should have, that was a very big clue and I missed it. Once I changed the configuration of AMODE and ABAUD everything fell into place and starting working. I was testing using W4GCW-8 so if you look at it on the APRS map you'll see where I went around the block. ? You've been very helpful and I really appreciate your efforts.
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
On Saturday, March 8, 2025 at 10:56:21 PM EST, Rob Giuliano via groups.io <kb8rco@...> wrote:
First question would be: Does the Green LED flash for some time, then go solid? ? If not, then the TT4 is not getting the GPS data.
Are you using a splitter that allows both computer and GPS? ?? The Byonics splitter has a port for the computer and one for the GPS with proper connectors.
?? Without a splitter, you must configure AMODE and ABAUD must be set to the GPS configuration. ?? BMODE and BBAUD won't matter without the splitter ???
NOTE:? The TT4 always starts out at 19200 baud and after initialization, changes to the ABAUD and AMODE settings.? This means you can still make settings change on PORT A, even if it is set to GPS.
If that isn't it, you need to provide more details: ?? What firmware is in the TT4? ?? Explain you connections to GPS and radio ?? Post your settings and we can review them to provide more comments.
On Saturday, March 8, 2025 at 04:08:54 PM EST, Don Wolfe via groups.io <w4gcw@...> wrote:
I'm trying to resururrect? my old TT4 and need some help. All I'm using is the tracker with a gps antenna, do I need to program two ports or just one? I have it configured to what seemed correct to me but when I install it in the car it doesn't track. The TT3 I've been using tracks fine so I'm guessing the gps antenna is good. Any suggestions would be very much appreciated.
73, Don? W4GCW /? WQAI774 EL98pf
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
|
First question would be: Does the Green LED flash for some time, then go solid? ? If not, then the TT4 is not getting the GPS data.
Are you using a splitter that allows both computer and GPS? ?? The Byonics splitter has a port for the computer and one for the GPS with proper connectors.
?? Without a splitter, you must configure AMODE and ABAUD must be set to the GPS configuration. ?? BMODE and BBAUD won't matter without the splitter ???
NOTE:? The TT4 always starts out at 19200 baud and after initialization, changes to the ABAUD and AMODE settings.? This means you can still make settings change on PORT A, even if it is set to GPS.
If that isn't it, you need to provide more details: ?? What firmware is in the TT4? ?? Explain you connections to GPS and radio ?? Post your settings and we can review them to provide more comments.
On Saturday, March 8, 2025 at 04:08:54 PM EST, Don Wolfe via groups.io <w4gcw@...> wrote:
I'm trying to resururrect? my old TT4 and need some help. All I'm using is the tracker with a gps antenna, do I need to program two ports or just one? I have it configured to what seemed correct to me but when I install it in the car it doesn't track. The TT3 I've been using tracks fine so I'm guessing the gps antenna is good. Any suggestions would be very much appreciated.
73, Don? W4GCW /? WQAI774 EL98pf
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
|
Re: Keep RF-only stations on the map for prolonged time?
Go to enables. Scroll down to internet access and check mark it. It will turn off stations heard via the internet. Good luck 73, Don W4GCW
On Sat, Mar 8, 2025 at 5:31 PM, Jeff KP3FT via groups.io <kp3ft@...> wrote: Hi all,
?
Is there a way to keep RF-only stations on the map for prolonged periods of time??? I've changed the "maxage" settings in both the aprsis32.xml and aprsis42(safe).xml files with no luck.? I also tried putting a zero in the maxage settings since I saw some reference in another message thread about that, but still no luck.? Or is it even possible?? Thanks, KP3FT
|
Re: Keep RF-only stations on the map for prolonged time?
I believe that should work but you have to make sure the program is closed before you make any changes otherwise next close will override all settings.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
toggle quoted message
Show quoted text
-------- Original message --------
From: "Jeff KP3FT via groups.io" <kp3ft@...>
Date: 3/8/25 17:31 (GMT-05:00)
Subject: [APRSISCE] Keep RF-only stations on the map for prolonged time?
Hi all,
?
Is there a way to keep RF-only stations on the map for prolonged periods of time??? I've changed the "maxage" settings in both the aprsis32.xml and aprsis42(safe).xml files with no luck.? I also tried putting a zero in the maxage settings since I saw some
reference in another message thread about that, but still no luck.? Or is it even possible?? Thanks, KP3FT
|
Keep RF-only stations on the map for prolonged time?
Hi all,
?
Is there a way to keep RF-only stations on the map for prolonged periods of time??? I've changed the "maxage" settings in both the aprsis32.xml and aprsis42(safe).xml files with no luck.? I also tried putting a zero in the maxage settings since I saw some reference in another message thread about that, but still no luck.? Or is it even possible?? Thanks, KP3FT
|
I'm trying to resururrect? my old TT4 and need some help. All I'm using is the tracker with a gps antenna, do I need to program two ports or just one? I have it configured to what seemed correct to me but when I install it in the car it doesn't track. The TT3 I've been using tracks fine so I'm guessing the gps antenna is good. Any suggestions would be very much appreciated.
73, Don? W4GCW /? WQAI774 EL98pf
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
|
I need passcode for APRSISCE/32
I am Scott Kemler AE0ZP
Sent from Proton Mail Android
|
Re: Finding stations in APRSISCE
aprs.fi supports a wild card search function that APRSISCE doesn't as far as I know. APRS.fi is also a full IS stream that stores data for years. APRSISCE is bound by your display filters, specific SSIDs and only data that is within the expiration timer of the stations.
On Monday, March 3rd, 2025 at 12:40, Facundo Fernandez via groups.io <kk4oda@...> wrote:
Thank you, I think maybe I was not using the full SSID, hoping it would work like APRS.fi. Will try this now!?
|
Re: Finding stations in APRSISCE
Thank you, I think maybe I was not using the full SSID, hoping it would work like APRS.fi. Will try this now!?
|
Re: Finding stations in APRSISCE
The find function works for stations already on your map (ssid specific). IF you start a find function without it on your map it now adds it to your dynamic filter and can trigger a multitrack window the NEXT time that station is seen on the IS Stream, but you have to wait for it.?
Are the stations you're trying to find already on your map? Are you using the exact SSID? Are you utilizing tacticals in any way?
On Monday, March 3rd, 2025 at 10:54, Facundo Fernandez via groups.io <kk4oda@...> wrote:
Hello,
?
I have been using APRSISCE for some time now, but I have been unable to find a way to search for specific call signs or APRS stations. This is a basic functionality, but when I try "Find Stations", none of the stations showing on the map are found, so I must be missing something very simple. I am trying to learn all the ins and outs of the software to deploy it for our local ARES operations.?
?
Once I figure this out, I am sure I will have some other questions about more advanced aspects.?
?
Thank you
?
KK4ODA
?
PS: the station is receiving and beaconing very well, and it is even digipeating.?
?
?
|
Finding stations in APRSISCE
Hello,
?
I have been using APRSISCE for some time now, but I have been unable to find a way to search for specific call signs or APRS stations. This is a basic functionality, but when I try "Find Stations", none of the stations showing on the map are found, so I must be missing something very simple. I am trying to learn all the ins and outs of the software to deploy it for our local ARES operations.?
?
Once I figure this out, I am sure I will have some other questions about more advanced aspects.?
?
Thank you
?
KK4ODA
?
PS: the station is receiving and beaconing very well, and it is even digipeating.?
?
?
|
Re: Help needed setting up FTM-300 with APRSIS32
It looks like I must have turned something off by accident. I deleted everything and reinstalled the software from a fresh download and it worked out of the box (I did have the correct passcode set up). It will just be one of life's mysteries as to what I did to break it...
?
Steve
It looks like I must have turned something off by accident. I deleted everything and reinstalled the software from a fresh download and it worked out of the box (I did have the correct passcode set up). It will just be one of life's mysteries as to what I did to break it...
?
Steve
|
Glad the info helped, good luck
toggle quoted message
Show quoted text
-------- Original Message -------- On 2/28/25 5:00 AM, Carl via groups.io <carlmailuk@...> wrote: Hi, great info thanks. Pushed me in a new direction.
I think it might be:-
<<MultiTrackTM New Items
When an object arrives as an item in a message, each object will show in a new
multitrack window, if not selected the objects will only show on the main map. >>
Now I wait...... :) 73
|
EA4HRV
Don Wolfe
Jeff KP3FT
Steve marsh (M0NMA)