开云体育

When into my hobby shop and was 114° it insulated R13 walls ceiling R30. My wife and doctor does want working hot weather so put some of my projects on hold till getting cooler. At less paint dries

Yea, just a few degree cooler here in visalia. But still hot enough to melt things. Sunday will be 113. george

I was wondering why fleeling Hot Check tv . No one is letting run my mini lathe.

I’d still have a crack at fixing the holder, you’ve nothing to lose but a bit of time. Bend it back, use 2 pieces of wood to align it with the other one and put a clamp on it. Then add some

Thanks Jon! yahoo.com@groups.io> wrote:

Ralph, . Let me check it out, I never ran it. I'll let you know. . John

That would be a lot simpler for me! Do you use Paypal? Ralph Hulslander 225 Old Canoe Place Road East Southampton, NY 11968 yahoo.com@groups.io> wrote:

Ralph, I have that exact motor. Got it off of eBay in 2016 for $80 Let you have it for the same in 2024 ? $80 in 2016 = $105 in 2024 today my loss is your gain. I never needed it apparently, take it

Here is the Lathe <https://photos.app.goo.gl/AcZiu7uQ65HWdf1z8> I believe it is a Cummins. Here is the motor <https://photos.app.goo.gl/hDVDnD71MUVw4Noc8> gmail.com@groups.io> wrote:

The brush holder is heat deformed. I will check the bearings. Ralph yahoo.com@groups.io> wrote:

That brush mount looks trashed, from way too much heat.? Contact Little Machine Shop, maybe they can sell you just the housing.

Ralph, . *Lots of 8" lathes *are 7" lathes with a 1/2 inch rise on the spindle axis. I'm working on 1/2" risers, maybe even 1" risers to get to 9", but it really wont be a 9" in strength and

??? Ralph how do those motor bearings feel , How did the motor sound was there any whining on the brush side ? ??? I'm kinda thinking? that ya may also have a bearing on it's way out . I'm

Ralph, That is a massive misalignment! Is that glued in place or is that some kind of sealer, or did it deform from running hot! . You're on track for something! Send us a photo of the whole

The gaps just need to be below the copper. Realistically, anything that will get them there will work - toothpicks, small screwdriver, blunt scribe, etc. Cheap and/or old toothbrushes are handy for

Commutator cleaned up nicely. Looks pretty flat, doesn’t seem worn. I didn’t expect it to be, our little lathes really don’t get enough use for that to happen. Unlike something like a car

Oops, here is the rough comutator! ( https://photos.app.goo.gl/Xbbm2DZUPaofjkkz8 )

I have the motor off the lathe and have cleaned up the comutator, which I have a bunch of question. But thought I show the brush holder first. As you can see the brush holder has gotten hot and is

Youtube https://www.youtube.com/watch?v=uNBfoQw0HRE at 8:06

What's needed is a saw blade that fits neatly in the gap between commutator segments - on larger motors, a hacksaw blade is appropriate. On these smaller motors, an X-Acto razor saw blade is the right